2018 Fiat 500 Ignition and Tune-Up Products

Essential Ignition and Tune-Up Products for 2018 Fiat 500s

Champion – Champion Copper Plus Small Engine- Single Card – J8C (Part No.841-1)

Champion Copper Plus Small Engine- Single Card - J8C

from

$2.99
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.306)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$1.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Guaranteed to deliver quick starts, good fuel economy and smooth acceleration, Autolite Copper Core spark plugs are designed to meet or exceed OES design requirements. Consider upgrading to Autolite Platinum, Double Platinum or Iridium XP plugs for improved engine performance. Copper core plugs are the industry standard.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
  • Quick Starts: Autolite Copper Core spark plugs are engineered to ensure quick and reliable engine starts.
  • Good Fuel Economy: Designed to optimize fuel efficiency, these spark plugs help you get the most out of every gallon.
  • Smooth Acceleration: Experience smoother acceleration with Autolite Copper Core spark plugs, enhancing overall driving performance.
  • OES Design Compliance: These spark plugs meet or exceed Original Equipment Service (OES) design requirements, ensuring high-quality performance.
  • Gasket Seat Type: Featuring a gasket seat type, these spark plugs provide a secure and effective seal for optimal engine function.
See More

Champion – Copper Plus Small Engine Spark Plug: Dependable Performance, OE Replacement, J8C (Part No.841)

Copper Plus Small Engine Spark Plug: Dependable Performance, OE Replacement, J8C

from

$3.79
Dependable Performance, OE Replacement, J8C. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear. Built to ISO and SAE standards, it offers dependable performance and durability. The OE type replacement plug resists fouling and boasts superior corrosion resistance. Its copper core center electrode allows for accurate control of heat range, ensuring a longer life, while the nickel center electrode tip material and flat seat type further enhance its reliability.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • OE type replacement plug
  • Resists fouling
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
  • Increased Conductivity and Heat Control: The Champion Copper Plus Small Engine Spark Plug features a copper core electrode that enhances conductivity and heat management, ensuring good overall wear.
  • Enhanced Reliability: With a nickel center electrode tip material and flat seat type, this spark plug provides enhanced reliability and consistent performance for small engines.
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXU27 (Part No.5337)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXU27

from

$11.99
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000░ Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
  • Superior Performance: This spark plug requires 5,000 less volts to fire compared to conventional spark plugs, providing maximum performance even under extreme conditions.
  • Enhanced Horsepower and Efficiency: Enjoy more horsepower, faster and easier starts, fewer misfires under heavy loads, and better fuel efficiency with the DENSO Iridium Power spark plug.
  • Flat Seat Type: Designed with a flat seat type for optimal fit and performance in a variety of engines.
See More

NGK – G-Power Spark Plug: Single Platinum Tip Design, DCPR7EGP (Part No.1682)

G-Power Spark Plug: Single Platinum Tip Design, DCPR7EGP

from

$4.49
NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.

Product Features:
  • SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
  • PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
  • TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
  • RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
See More

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RL82C (Part No.874)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RL82C

from

$2.49
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

NGK – Iridium IX Spark Plug: Single Iridium Fine Wire, DCPR7EIX SOLID (Part No.97637)

Iridium IX Spark Plug: Single Iridium Fine Wire, DCPR7EIX SOLID

from

$9.79
NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode’s durability is six times harder than platinum. Iridium alloy’s extremely high melting point is perfect for today’s engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.

Product Features:
  • SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
See More

NGK – OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SIKR9A7 (Part No.93618)

OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SIKR9A7

from

$18.49
NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur

Product Features:
  • ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs
See More

Autolite – Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration (Part No.275)

Copper Spark Plug: Delivers Quick Starts, Good Fuel Economy, Smooth Acceleration

from

$3.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

NGK – Laser Iridium Spark Plug (Part No.F1000464925NGK)

Laser Iridium Spark Plug

from

$21.92
NGK’s Laser Iridium Spark Plugs Provide Superior Ignitability and Long Service Life. Fine Wire Iridium Tipped Center Electrode and Fine Wire Platinum Tipped Ground Electrode Ensures Slow Wear Rate Providing Stable Idle, Superior Anti Fouling, Improved Fuel Efficiency and Lower Emissions.

Product Features:
  • Trivalent Metal Plating Provides Superior Anti-Corrosion and Anti-Seizing Properties
  • Corrugated Ribs Prevent Flashover
  • Pure Alumina Silicate Ceramic Insulator, Provides Superior Strength and Better Heat Transfer
  • Copper Core Aids in Heat Removal
  • Triple Seals Prevent Leakage
See More

DENSO – U-Groove Spark Plug: OE Performance, lasts 30K+ Miles, XU22EPR-U (Part No.3179)

U-Groove Spark Plug:  OE Performance, lasts 30K+ Miles, XU22EPR-U

from

$3.79
U-Groove design provides better ignitability for increased engine efficiency.

Product Features:
  • Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
  • Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Lasts twice as long as most conventional plugs
  • 100% pre-fired to assure reliable operation
  • U-Groove Conventional
See More

Autolite – Small Engine Display Pack (Part No.295DP)

Small Engine Display Pack

from

$1.99
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:
  • Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
  • Multi-rib insulator reduces danger of “flash-over”
  • One-piece terminal post adds strength
  • Resistor reduces radio frequency interference (RFI) and electrode erosion
See More

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement L82C (Part No.811)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement L82C

from

$2.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • OE type replacement plug
  • Resists fouling
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
See More

Champion – Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RJ8C (Part No.871)

Copper Plus Small Engine Spark Plug Dependable Performance, OE Replacement RJ8C

from

$2.49
Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Copper Plus – Dependable Performance and Durability
  • OE type replacement plug
  • Resists fouling
  • Copper core center electrode allows for accurate control of heat range for longer life
  • Superior corrosion resistance
  • Built to ISO and SAE standards for proven performance
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48769)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$68.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1161)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$55.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48771)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$83.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1061)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$47.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

WSO – Direct Ignition Coil (Part No.F3005454617WSO)

Direct Ignition Coil

from

$69.78
Every WSO ignition coil is developed and designed for its specific application, and engineered for maximum performance. WORLD SOURCEONE ignition coils are designed to operate reliably and dependably under all operating conditions and engine rpm ranges, providing the highest engine performance, low exhaust emissions, and fuel economy objectives. WSO Direct Ignition Coils are designed to adapt the required energy output to match engine-operating conditions and deliver the optimum energy level needed to ignite a diluted stratified charge.

Product Features:
  • OE-Equivalent and a direct fit application
  • Superior, reliable performance compared to competitive products
  • Lower cost alternative to original equipment
  • No additional time consuming steps needed for installation
  • Factory original equipment connectors
  • Improved coil efficiency reduces the need to generate excessive high voltage
  • Designed to provide durability and performance
  • Noise abatement technology to eliminate audible coil noise
  • Lower primary inductance provides high-speed performance
  • Maximum available voltage under all operating conditions
  • TS 16949 Certification
See More

Delphi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005663873DEL)

Direct Ignition Coil - (Coil on Plug)

from

$86.69
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.

Product Features:
  • Improved dwell accuracy decreases module and coil temperatures for greater reliability
  • Noise abatement material between laminations reduces audible coil noise
  • Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
  • Lower primary inductance provides high-speed performance
  • Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
  • Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
  • Direct connection to spark plugs (via small boot) eliminates spark plug wires
  • Composite iron coils provide programmable energy
  • Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
  • Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
  • Radio frequency interference (RFI)suppressor optional
See More

Bosch – Direct Ignition Coil (Part No.F3005454618BOS)

Direct Ignition Coil

from

$68.77
Direct Ignition Coil

Delphi – Ignition Coil (Part No.GN10680)

Ignition Coil

from

$83.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Encore Automotive – Ignition Coil (Part No.IC-D20009)

Ignition Coil

from

$101.99
Encore Automotive Genuine OE Ignition Coil converts a 12-volt current to the high voltage energy needed to create an electric spark required to ignite the air-fuel mixture. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.

Product Features:
  • Genuine OE Part
  • Direct fit and OE performance to ensure reliable voltage at all speeds
  • High quality materials provide durability and protection against corrosion
  • Consistent and effective combustion
See More

Bosch – Direct Ignition Coil (Part No.F3005454617BOS)

Direct Ignition Coil

from

$120.07
Direct Ignition Coil

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1074)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$52.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Upgrade your 2018 Fiat 500 with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2018 Fiat 500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Fiat or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your 500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Ignition and Tune-Up Products for the 2018 Fiat 500, designed to meet your needs without breaking the bank. From Spark Plug replacements to Ignition Coils and Boots upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 2018 Fiat 500 at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $8.99 to $83.99, with an average price of $42.34. Our 6 Ignition and Tune-Up Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 2018 Fiat 500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Fiat 500, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like NGK, and more. NGK Ignition and Tune-Up Products start at just $18.49 and boast an impressive 5 stars average rating from customers. With 30 customer reviews and counting, our 2018 Fiat 500 Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Fiat 500 is always ready to roll. We’re committed to providing you with everything you need to keep your 500 in top shape, all in one place. Start shopping confidently below for your 2018 Fiat 500!

Best-Selling Spark Plugs for 2018 Fiat 500s

Enhance the driving experience in your Fiat with 3 quality Spark Plug components, starting at $8.99.

NGK – OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SIKR9A7 (Part No.93618)

OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SIKR9A7

from

$18.49
NGK Laser Iridium High Ignitability spark plugs offer the best combination of performance and longevity. Engineered specifically for OE applications, Laser Iridium High Ignitability spark plugs are tested to the highest standards to ensure quality and dur

Product Features:
  • ACTUAL OE or EQUIVALENT HIGH IGNITABILITY DESIGN: SPE tip & iridium alloy center electrode produce the most advanced OE spark plug technology
  • IRIDIUM ALLOY CENTER ELECTRODE: Iridium’s density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
  • SPE DESIGN: Square platinum electrode shape of the ground electrode provides the best ignitability and service life for high heat engines
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE SPE iridium alloy plugs
See More

DENSO – Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXU27 (Part No.5337)

Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IXU27

from

$11.99
Increased performance with World’s smallest Iridium Center Eletrode (0.4mm).

Product Features:
  • World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
  • Patented 360-degree laser welding assembly process
  • U-groove and taper cut ground electrode to maximize flame propagation.
  • Withstands temperatures greater than 4000░ Fahrenheit
  • Burnished nickel plating for high temperature endurance and superior corrosion resistance
  • Wide range of part numbers for thousands of applications, including classic and collector cars
  • Iridium Power
  • Superior Performance: This spark plug requires 5,000 less volts to fire compared to conventional spark plugs, providing maximum performance even under extreme conditions.
  • Enhanced Horsepower and Efficiency: Enjoy more horsepower, faster and easier starts, fewer misfires under heavy loads, and better fuel efficiency with the DENSO Iridium Power spark plug.
  • Flat Seat Type: Designed with a flat seat type for optimal fit and performance in a variety of engines.
See More

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP5663)

Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition

from

$8.99
Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:
  • 0.6 mm finewire design improves ignitability
  • Patented V-trimmed platinum sidewire technology resists wear
  • OE equivalent design is engineered for every engine
  • Designed for better overall durability with virtually no gap erosion
See More

Most Popular 2018 Fiat 500 Ignition Coils and Boots

Customize your Fiat with 3 Ignition Coils and Boots products like Ignition Coils, all priced under $83.99.

Delphi – Ignition Coil (Part No.GN10680)

Ignition Coil

from

$83.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

Bosch – Direct Ignition Coil (Part No.F3005454618BOS)

Direct Ignition Coil

from

$68.77
Direct Ignition Coil

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1161)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$55.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Top-Rated Ignition and Tune-Up Products Brands For Your 2018 Fiat 500

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 2018 Fiat 500s. Below you’ll find some of our best rated Ignition and Tune-Up Products from NGK, and more. Ignition and Tune-Up Products from these brands that fit a 2018 500 start at just $18.49 and are rated as high as 5 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular NGK 2018 Fiat 500 Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 2018 Fiat 500, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. NGK ticks all of those boxes. We offer a wide selection of NGK Ignition and Tune-Up Products, specifically designed for the 2018 Fiat 500. With over 1 NGK brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.49. Plus, with over 5 customer reviews and an average rating of 5 stars, you can trust that our NGK Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SIKR9A7
from
$18.49

(5)

OE Series Laser Iridium High Ignitability Spark Plug: SPE Tip Design, SIKR9A7

“These work like they should in my girlfriend’s Jeep.”

FAQs for 2018 Fiat 500 Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 2018 Fiat 500s?

Out of 6 Ignition and Tune-Up Products that fit 2018 Fiat 500s, the following parts are the top sellers:

What’s the price range for 2018 Fiat 500 Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 2018 Fiat 500 start at $8.99 and go up to $83.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 2018 Fiat 500?

The average price for Ignition and Tune-Up Products for the 2018 Fiat 500 is $42.34. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Fiat 500 model years?

Yes, we currently carry Ignition and Tune-Up Products for 22 model years of Fiat 500s between 1947 and 2019. Ignition and Tune-Up Products are bought most frequently for the following model years: 2019, 2017, 2016, 2015, 2014, 2013, 2012, 1961, and 1960.

What are the cheapest Ignition and Tune-Up Products for my 2018 Fiat 500?

What are the top-rated Ignition and Tune-Up Products that fit the 2018 Fiat 500?

Out of 30 reviews by customers, our 2018 Fiat 500 Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 2018 Fiat 500 and their top-rated products:

What types of Ignition and Tune-Up Products do you sell for my 2018 Fiat 500?

As of 2/5/25, these are some of the most in-demand types of Ignition and Tune-Up Products for a 2018 Fiat 500:

Can I get help with 2018 Fiat 500 Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Fiat Ignition and Tune-Up Products and more.

What is your return policy for Fiat 500 Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Fiat 500 Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.