2018 Chevrolet Tahoe Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2018 Tahoe. Advance Auto Parts has popular Tahoe parts like Engine Gaskets and Seals, Camshafts, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other Tahoe model years including 2014, 2015, 2016, 2017, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2018 Chevrolet Tahoe Engine Parts below and start saving instantly.

Popular 2018 Chevrolet Tahoe Engine Parts Categories

Camshaft Gaskets

Engine Valve Lifters

Engine Variable Timing Solenoids

Engine Oil Temperature Senders

Valve Cover Gaskets

Oil Pan Gaskets

Camshaft Position Sensors

Rear Main Seal Sets

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Crankshaft Position Sensors

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Supercharger Pressure Sensors

Engine Lifter Valley Cover Gaskets

Engine Oil Cooler Accessories

Cylinder Head Gaskets

Oil Level Sensors

Crankshaft Seals

Timing Sets

Oil Cooler Line Connectors

Engine Oil Dipsticks

Timing Chain Tensioners

Engine Oil Pump Pickup Tube and Screens

Engine Valve Stem Seals

Camshaft Timing Adjuster Magnets

Camshaft Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Engine Oil Galley Plugs

Camshaft Seals

Standard Individual Rod Bearings

Engine Oil Filler Cap Seals

Timing Crank Gears

Camshaft Thrust Plate and Bearings

Fuel Pump Gaskets

Remanufactured Engines

Engine Camshaft Position Sensor O-rings

Engine Oil Cooler Line Gaskets

Engine Oil Pan Seals

Camshaft Position Sensor Seals

Valve Train Set Up Spring Set

Essential Engine Parts for 2018 Chevrolet Tahoes

from

$39.49

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to ensure proper air/fuel ratio along with proper operation of the cooling fans and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include, check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clips included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$16.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$32.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$69.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head gaskets are sold individually and may require new head bolts based on application.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$30.99

ENG TIMNG CHAINTNSNR

from

$17.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$0.99

Engine Oil Dipstick Tube O-Ring

from

$395.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 9-Keyway Crank, 1 Bolt/4 Sensor, .390″ Raised Cam

from

$6.99

Product Features:

Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

from

$71.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$102.99

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

Manufactured from high quality durable materials for long wear
Precision engineering protects the engine from dirt and contaminants
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$26.99

This engine oil cooler line connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine oil cooler line connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$12.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$1252.99

Product Features:

Out-of-the-Box Bolt-On Performance
With Straight Plugs
64cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$22.99

This engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications. Level marks are clearly distinguished and properly gauged for accuracy.

Product Features:

Ideal replacement – this engine oil dipstick is designed to match the fit and function of an original equipment dipstick in specified applications
Ideal solution – level marks are clearly distinguished and properly gauged for accuracy
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$157.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$45.99

High Performance 3/8″ Pitch Single Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$28.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$111.99

Engine Piston Ring Set

from

$309.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$15.49

GM Genuine Parts Engine Oil Pan Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$31.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: springless; multi-lip
Temperature range: -100 Deg. F to 450 Deg. F; -73 Deg. C to 232 Deg.C
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$125.99

An ACDelco Professional, premium aftermarket Engine Crankshaft Position Sensor is a high quality replacement for many vehicles on the road today. It monitors the position and rotational speed of the crankshaft. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. This premium aftermarket replacement engine crankshaft position sensor is manufactured to meet your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$38.99

Made in U.S.A. Melling performance provides oil galley plugs for LS engine block rebuilds and repairs. Our dual o-ring oil galley improve oil flow and pressure in the engine block where needed, as well as act as an added barrier to block dirty oil from bypassing the filter. Melling performance oil galley plugs are manufactured from billet aluminum to outperform stock replacement oil galley plugs to get the most performance and protection out of your engine.

Product Features:

3.042 Inchs Long
Double O-Ring Design To Reduce Oil Bypass
Black anodized billet 6061-T6 aluminum
Improves Oil Flow, Oil Pressure, And Completely Blocks Dirty Engine Oil From Bypassing The Filter

Upgrade your 2018 Chevrolet Tahoe with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2018 Chevrolet Tahoe, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your Tahoe functioning at its best. At Advance Auto Parts, we offer a wide selection of 90 Engine Parts for the 2018 Chevrolet Tahoe, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2018 Chevrolet Tahoe at great prices. Our Engine Parts inventory for this model ranges from just $0.99 to $9,172.99, with an average price of $177.67. Our 90 Engine Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2018 Chevrolet Tahoe without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Chevrolet Tahoe, we stock popular OEM and aftermarket Engine Parts from top names like GM Genuine, Sealed Power, Dorman, and more. GM Genuine Engine Parts start at just $40.99 and boast an impressive 4.5 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $5.99, and at an average 4.3 stars rating. With 146 customer reviews and counting, our 2018 Chevrolet Tahoe Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Chevrolet Tahoe is always ready to roll. We’re committed to providing you with everything you need to keep your Tahoe in top shape, all in one place. Start shopping confidently below for your 2018 Chevrolet Tahoe!

Best-Selling Engine Gaskets and Seals for 2018 Chevrolet Tahoes

Enhance the driving experience in your Chevrolet with 11 quality Engine Gaskets and Seal components, starting at $5.99.

show more show less

from

$37.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$11.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold
Contains all gaskets and seals to remove and replace exhaust manifold

from

$59.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$26.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to help ensure a consistent and long-life seal
PRECISE DESIGN – Engineered to work with the embossed cover and pan flanges
PREVENTS OVERTIGHTENING – Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$215.99

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted

from

$142.99

This direct replacement rear main seal cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this rear main seal cover matches the fit and function of the original equipment cover for a trouble-free installation
Durable construction – this rear main seal cover is made of quality materials for a reliable fit and enduring service life
Convenient solution – get a quality repair solution without the hassle of buying original equipment
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$134.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro timing cover gasket sets include every part needed for the repair unless otherwise noted

from

$17.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$6.29

GM Genuine Parts Engine Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$5.99

Fuel Pump Mounting Gasket

Most Popular 2018 Chevrolet Tahoe Camshafts

Customize your Chevrolet with 12 Camshafts products like Camshaft Position Sensors, Camshaft Seals, and Camshaft Gaskets, all priced under $57.99.

show more show less

from

$30.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$57.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$29.99

ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$55.99

The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.

Product Features:

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$55.99

GM Genuine Parts Engine Variable Valve Timing (VVT) Adjuster Magnet are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$53.99

This replacement camshaft adjuster magnet is a direct replacement for a damaged original equipment magnet. Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:

Ideal replacement – this VVT adjuster magnet matches the fit and function of the original equipment part to restore proper operation to the variable valve timing system
Durable construction – this VVT adjuster magnet is made of quality materials to ensure reliable performance and a long service life
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$24.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$23.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$22.49

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$11.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top Picks for 2018 Chevrolet Tahoe Engine Mounts

Upgrade Chevrolet Tahoes with top-quality Engine Mounts parts, including 2 OEM and aftermarket selections for your 2018 model.

show more show less

from

$147.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CADI 15-20; CHEV 14-20; GMC 14-20;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2014-2020
Weight approx: 6 Lbs
HYDRAULIC
PART GROUP: 3275, 3276
OE TSB ALERT: 17-NA-166
WITHOUT HEAT SHIELD

from

$158.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2014-2020
Weight approx: 6 Lbs
HYDRAULIC
PART GROUP: 3275, 3276
OE TSB ALERT: 17-NA-166
WITHOUT HEAT SHIELD

In-Demand Valve Cover and Cylinder Heads for 2018 Chevrolet Tahoes

Select from 12 premium Valve Cover and Cylinder Heads parts for your 2018 Chevrolet Tahoe, with prices ranging from $12.99 to $728.99.

show more show less

from

$24.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$68.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$66.99

Product Features:

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$76.99

ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Adjusts the valves on your vehicle’s engine for proper performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$728.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$396.99

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$331.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$309.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$249.99

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$78.99

PROPRIETARY NEXTGEN COATING TECHNOLOGY – Precise amount of coating is applied to withstand higher engine temperatures and accommodate surface finishes as rough as 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at vital areas to eliminate leak paths
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$13.99

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$12.99

Most Sold 2018 Chevrolet Tahoe Engine Timing Parts

Explore our best-selling Chevrolet parts for the 2018 Tahoe among 9 OEM and aftermarket options starting from $38.99.

show more show less

from

$44.49

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$74.99

ACDelco GM Original Equipment Engine Timing Chains synchronize the rotation of the crankshaft and camshaft(s) in an internal combustion engine. They help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes, and are GM-recommended replacements for your vehicle’s original components. These original equipment timing chains have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Synchronizes the rotation of the crankshaft and the camshaft(s) to help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$109.99

Engine Variable Valve Timing Solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. They are GM-recommended replacements for your vehicle’s original components. These original equipment solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Coated to help protect against premature corrosion
Designed to match OEM calibration to provide the performance you expect from GM
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$264.99

HIGH PERFORMANCE SET

from

$204.99

Precision-wound coated copper windings increase product durability and life cycle.
Hard-coated and anodized spool valve to prevent corrosion and increase service life.
Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$139.99

HIGH PERFORMANCE SET

from

$80.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs. Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Refer to our online catalog for detailed application-specific information.

Product Features:

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$53.99

ENGINE TIMING CHAIN

from

$38.99

ENG TIMNG CHAINTNSNR

Top-Rated Engine Parts Brands For Your 2018 Chevrolet Tahoe

Shop for the best-rated brands offering Engine Parts and other products for your 2018 Chevrolet Tahoes. Below you’ll find some of our best rated Engine Parts from GM Genuine, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 2018 Tahoe start at just $5.99 and are rated as high as 4.5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular GM Genuine 2018 Chevrolet Tahoe Engine Parts

When it comes to maintaining or upgrading your 2018 Chevrolet Tahoe, using quality Engine Parts is essential to ensure durability and a perfect fit. GM Genuine ticks all of those boxes. We offer a wide selection of GM Genuine Engine Parts, specifically designed for the 2018 Chevrolet Tahoe. With over 1 GM Genuine brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $40.99. Plus, with over 3 customer reviews and an average rating of 4.5 stars, you can trust that our GM Genuine Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $40.99

(3)

Engine Coolant Temperature Sensor

“I’m glad I used the part that advance auto parts carries its the original AC Delco OEM part we get up and works great! Now my truck is back to running”

Popular Sealed Power 2018 Chevrolet Tahoe Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 2018 Chevrolet Tahoe owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 2018 Tahoe, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Sealed Power Engine Parts range from $5.99 to $78.99, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $5.99

(2)

Engine Connecting Rod Bearing

“I needed these parts right away & Advance Auto had them in stock. They were exactly what I needed, they worked great.”

from $78.99

(4)

Engine Connecting Rod Bearing Set

“great”

from $7.29

(1)

Engine Connecting Rod Bearing

“great price and fit good”

FAQs for 2018 Chevrolet Tahoe Engine Parts

Which Engine Parts are best-sellers for 2018 Chevrolet Tahoes?

Out of 90 Engine Parts that fit 2018 Chevrolet Tahoes, the following parts are the top sellers:

Engine Valve Lifter (12486346) – $24.99
Engine Camshaft Gasket (10308333) – $30.99
Engine Valve Stem Oil Seal Set (20680518) – $37.99

What’s the price range for 2018 Chevrolet Tahoe Engine Parts?

Engine Part prices for the 2018 Chevrolet Tahoe start at $0.99 and go up to $9,172.99 for the most premium parts.

What’s the average price of a Engine Part for a 2018 Chevrolet Tahoe?

The average price for Engine Parts for the 2018 Chevrolet Tahoe is $177.67. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet Tahoe model years?

Yes, we currently carry Engine Parts for 30 model years of Chevrolet Tahoes between 1995 and 2026. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 2018 Chevrolet Tahoe?

The cheapest 2018 Chevrolet Tahoe Engine Parts we carry in stock are:

Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
Engine Connecting Rod Bearing (20683077) – $4.79
Engine Connecting Rod Bearing (19694903) – $5.99
Engine Oil Filler Cap Seal (12005635) – $5.99
Engine Connecting Rod Bearing (19694902) – $5.99

What are the top-rated Engine Parts that fit the 2018 Chevrolet Tahoe?

Out of 146 reviews by customers, our 2018 Chevrolet Tahoe Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2018 Chevrolet Tahoe and their top-rated products:

Engine Gaskets and Seals
- Engine Valve Stem Oil Seal Set (20680518) – $37.99

What types of Engine Parts do you sell for my 2018 Chevrolet Tahoe?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2018 Chevrolet Tahoe:

Can I get help with 2018 Chevrolet Tahoe Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet Tahoe Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Tahoe Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Chevrolet Tahoe Engine Parts

NTK – Engine Coolant Temperature Sensor (Part No.EF0075)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40626)

MAHLE Original – Engine Cylinder Head Gasket (Part No.54442)

INA US – ENG TIMNG CHAINTNSNR (Part No.ZG-9-5417)

Felpro – Engine Oil Cooler Line Gasket (Part No.73127)

Felpro – Engine Oil Dipstick Tube O-Ring (Part No.73889)

Cloyes Performance – High Performance Timing Set (Part No.9-3673TX9ZR)

Melling – Stock Replacement Engine Assembly Lubricant, 4 oz. (Part No.M-10012)

NTK – Engine Camshaft Position Sensor (Part No.EC0099)

Melling – Stock Replacement Oil Pump Screen (Part No.324S)

Dorman – Oil Cooler Line Connector (Part No.800-622)

MAHLE Original – Engine Oil Cooler Gasket Set (Part No.B31872)

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

Edelbrock – RPM Small-Block Chevy Cylinder Head 64cc Hydraulic Flat Tappet Cam (Part No.60899)

Felpro – Engine Camshaft Thrust Plate (Part No.ES 73115)

Dorman – Help – Engine Oil Dipstick: Direct Replacement, Stainless Steel (Part No.917-307)

Sealed Power – Engine Connecting Rod Bearing Set (Part No.8-2555A 10)

Cloyes Performance – High Performance Timing Chain (Part No.9-304)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S827)

Sealed Power – Engine Piston Ring Set (Part No.E921X)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-11023-01)

GM Genuine Parts – Oil Pan Seal (Part No.12621086)

National – Multi-Purpose Seal (Part No.5512)

ACDelco – Engine Crankshaft Position Sensor (Part No.213-4761)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50504 R-1)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Melling Select Performance – Stock Replacement Oil Galley Plug (Part No.MOGP-200HP)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71039)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

Felpro – Engine Lifter Valley Cover Gasket (Part No.MS 97404)

Felpro – Engine Oil Pan Gasket Set, 10 Bolt Hole, One Piece Gasket (Part No.OS 30893)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50907 R)

Felpro – Engine Conversion Gasket Set (Part No.CS 26744)

Dorman – Main Seal Cover Kit (Part No.635-786)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46221-1)

Felpro – Engine Oil Cooler Line Gasket (Part No.73127)

GM Genuine Parts – Oil Pan Gasket (Part No.12666993)

Felpro – Fuel Pump Mounting Gasket (Part No.73158)

MAHLE Original – Engine Camshaft Gasket (Part No.B32270)

Sealed Power – Engine Camshaft Bearing Set (Part No.1923M)

GM Genuine Parts – Engine Camshaft Position Sensor (Part No.12623093)

Felpro – Engine Camshaft Position Sensor Seal (Part No.72760)

Felpro – Engine Camshaft Thrust Plate (Part No.ES 73115)

Carquest Premium – Engine Variable Valve Timing (VVT) Adjuster Magnet (Part No.VVC1121)

GM Genuine Parts – Camshaft Phaser Magnet (Part No.12670340)

Dorman – Variable Valve Timing Solenoid (Part No.916-603)

Victor Reinz – Engine Camshaft Seal (Part No.71-18369-00)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1959)

Dorman – Magnetic Camshaft Position Sensor (Part No.962-277)

Victor Reinz – Engine Timing Cover Gasket (Part No.71-14601-00)

Anchor – Engine Mount: Front Left, 1 Piece (Part No.3275)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.3276)

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 73121)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26744 PT)

ACDelco – Active Fuel Management Valve Lifter (Part No.12645725)

Spartan – Engine Cylinder Head; Chev 5.3 L83 GDI 14-15 Head (Part No.2CT21)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26749 PT)

MAHLE Original – Engine Cylinder Head Gasket Set (Part No.HS54996)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-11023-01)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26744 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26749 PT)

Sealed Power – Engine Valve Lifter (Part No.HT-2148AB)

Melling Select Performance – Valve Train Set Up Spring (Part No.VTSS100)

Cloyes Gear – Engine Timing Chain (Part No.9-4205)

ACDelco – Timing Chain (Part No.12646386)

GM Genuine Parts – Camshaft Position Actuator Solenoid Valve (Part No.12681018)

Cloyes Performance – HIGH PERFORMANCE SET (Part No.9-3678X5Z)

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1259)

Cloyes Performance – HIGH PERFORMANCE SET (Part No.9-3678X5)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S1111)

INA US – ENGINE TIMING CHAIN (Part No.ZC-9-4205)

INA US – ENG TIMNG CHAINTNSNR (Part No.ZT-91174)