2018 Chevrolet Equinox Fuel and Emissions Systems

Name: Vapor Canister Vent
Brand: ACDelco
SKU: 84802774
Price: 54.99 USD

Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2018 Equinox. Advance Auto Parts has popular Equinox parts like Oxygen Sensors, Fuel Pumps, Gas Caps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Equinox model years including 2014, 2015, 2016, 2017, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2018 Chevrolet Equinox Fuel and Emissions Systems below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2018 Chevrolet Equinox Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Gas Caps

Vacuum Pumps

Ambient Air Temperature Sensor Bolts

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

MAP-Barometric Pressures

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Canister Purge Solenoids

Direct Injection High Pressure Fuel Pumps

EGR Valves

Fuel Injectors

Fuel Tank Pressure Sensors

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector Seal Kits

Fuel Injector Gaskets

Fuel Tank Filler Necks

Secondary Air Injection Relays

Ambient Air Temperature Sensor Clip

Fuel Cap Tester Adapters

Fuel Rail O-Ring Kits

Fuel Injector Seal Tool Set

Essential Fuel and Emissions Systems for 2018 Chevrolet Equinoxes

from

$54.99

ACDelco GM Original Equipment Vapor Canister Vent Solenoids are GM-recommended replacements for your vehicle’s original components. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. These original equipment vapor canister vent solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls fresh air flow to the canister
Sends fuel vapors to the engine for re-burn
Helps control fuel tank pressure
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$196.99

All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$84.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$44.99

ACDelco GM Original Equipment Fuel Pressure Sensors monitor the fuel pressure in your vehicle’s fuel system, and are GM-recommended replacements for your vehicle’s original components. They send fuel pressure information to the powertrain control module, which uses the data to adjust fuel delivery parameters. These original equipment fuel pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Signals the PCM to monitor fuel supplied to the engine
Designed to accurately monitor fuel tank pressure
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$96.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$23.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$42.99

Product Features:

Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
Meets or exceeds all OEM specifications

from

$67.99

Pressure sensors are used within several operating systems on the vehicle. Subjects in this category measure the pressure of both liquid and air to include air in a positive pressure and negative pressure range. Pressure sensors report out as the result of an electrical device called a strain gauge which produces an analog or digital signal output dependent on the needs of the circuit. Pressures may be very low such as barometric pressure, or extremely high such as in a high-pressure fuel injection system.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$13.99

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$58.99

Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.

Product Features:

Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
Quality construction – manufactured from premium materials for a long service life
Excellent value – original equipment quality at a lower price
Quality tested – has undergone testing to ensure proper fit and performance

from

$21.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$4.99

SPLASH SHLD COWL RET

from

$238.99

GM Genuine Parts Mechanical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These help provide a steady, reliable supply of fuel for your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a steady, reliable supply of fuel for your vehicle’s engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$22.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$178.99

GM Genuine Parts Equipment Exhaust Gas Recirculation (EGR) Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These valves are an emission control device. EGR valves modulate the flow of exhaust gas into the intake manifold to help reduce nitrogen oxide (NOx) emissions. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$15.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$264.99

Product Features:

Direct replacement – this fuel filler neck is made to match the original equipment on specific vehicles
Durable construction – made of corrosion-resistant materials to reduce future failure potential
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$109.99

GM Genuine Parts Vacuum Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These vacuum pumps provide a source of vacuum power for emission controls, and may be electrically or mechanically operated, depending on vehicle application. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent the effects of engine blow-by
Assists in minimizing premature oil contamination
Operates blower air direction controls for A/C and heat
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$47.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$108.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$129.99

This premium tool kit is designed to ensure the correct installation of the combustion seal on Gasoline Direct Injectors (GDI), which require replacement any time the injector is reinstalled. This special tool allows for the expansion of the combustion seal to allow installation onto the injector’s tip and resizing tools to provide precise dimensioning to ensure proper combustion sealing. Constructed of high-quality stainless steel the tool will provide years of trouble-free service and can be used on over 100 unique styles of GDI injectors.

Product Features:

Includes two expansion cones
Includes two resizing tools
Includes one seal installation collet
Includes hard case
Includes instruction manual

from

$70.99

ACDelco GM Original Equipment Multi Purpose Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$129.99

GM Genuine Parts Fuel Injection Fuel Rail O-Ring Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$65.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$157.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

Upgrade your 2018 Chevrolet Equinox with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2018 Chevrolet Equinox, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Equinox functioning at its best. At Advance Auto Parts, we offer a wide selection of 75 Fuel and Emissions Systems for the 2018 Chevrolet Equinox, designed to meet your needs without breaking the bank. From Oxygen Sensor replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2018 Chevrolet Equinox at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.49 to $264.99, with an average price of $66.08. Our 75 Fuel and Emissions Systems in stock come from 11 trusted brands, so you’re sure to find the right part for your 2018 Chevrolet Equinox without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Chevrolet Equinox, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Carquest Premium, and more. Carquest Premium Fuel and Emissions Systems start at just $11.99 and boast an impressive 4.4 stars average rating from customers. With 828 customer reviews and counting, our 2018 Chevrolet Equinox Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Chevrolet Equinox is always ready to roll. We’re committed to providing you with everything you need to keep your Equinox in top shape, all in one place. Start shopping confidently below for your 2018 Chevrolet Equinox!

Best-Selling Oxygen Sensors for 2018 Chevrolet Equinoxes

Enhance the driving experience in your Chevrolet with 8 quality Oxygen Sensor components, starting at $67.99.

show more show less

from

$69.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$92.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$121.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$89.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$99.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

Oxygen Sensor: 4 Wire, Direct Fit, Heated, Wire Length: 14.76"

from

$99.99

from

$87.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the airfuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$67.99

Most Popular 2018 Chevrolet Equinox Fuel Pumps

Customize your Chevrolet with 4 Fuel Pumps products like Fuel Pump Driver Modules, Direct Injection High Pressure Fuel Pumps, and Fuel Cap Tester Adapters, all priced under $238.99.

show more show less

from

$76.99

ACDelco GM Original Equipment Fuel Pump Control Modules help relay power to your vehicle’s fuel pump, and are GM-recommended replacements for your vehicle’s original components. These original equipment modules have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps power the fuel pump
Helps your vehicle to idle smoothly
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$238.99

Helps provide a steady, reliable supply of fuel for your vehicle’s engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Top Picks for 2018 Chevrolet Equinox Gas Caps

Upgrade Chevrolet Equinoxes with top-quality Gas Caps parts, including 21 OEM and aftermarket selections for your 2018 model.

show more show less

from

$15.79

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$16.79

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$12.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$9.99

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$31.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$22.99

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

In-Demand Fuel Injectors for 2018 Chevrolet Equinoxes

Select from 17 premium Fuel Injectors parts for your 2018 Chevrolet Equinox, with prices ranging from $11.99 to $157.99.

show more show less

from

$73.99

Carquest Premium mass air flow (MAF) sensors are built to meet the original equipment (OE) specifications for each application. Our MAF sensors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium mass air flow sensors are 100% new and undergo extensive validation testing to ensure long-lasting performance and reliability.

Product Features:

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$119.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient airfuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$119.99

Hitachi¿s Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachi¿s air flow sensors the premium choice.

Product Features:

Meets the OE performance and durability standards for this application
Welded connections instead of soldered for dependability
Contaminant bypass port provides reliable operation and increases longevity
Contaminant bypass port provides reliable operation and increases longevity
Meets the OE performance and durability standards for this application
Welded connections instead of soldered for dependability

from

$118.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient airfuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$157.99

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$145.99

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$109.99

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new O-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$94.99

Meets the OE performance and durability standards for this application
Welded connections instead of soldered for dependability
Contaminant bypass port provides reliable operation and increases longevity
Contaminant bypass port provides reliable operation and increases longevity
Meets the OE performance and durability standards for this application
Welded connections instead of soldered for dependability

from

$41.49

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$99.99

Meets the OE performance and durability standards for this application
Welded connections instead of soldered for dependability
Contaminant bypass port provides reliable operation and increases longevity
Contaminant bypass port provides reliable operation and increases longevity
Meets the OE performance and durability standards for this application
Welded connections instead of soldered for dependability

from

$150.46

Mass Air Flow Sensor

from

$135.99

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$129.99

Includes two expansion cones
Includes two resizing tools
Includes one seal installation collet
Includes hard case
Includes instruction manual

from

$72.99

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new O-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$23.99

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$13.99

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$11.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components. Use CARQUEST tool kit ATK-001 or equivalent for proper installation of combustion seal.

Product Features:

Premium OE quality materials
Includes upper O-ring
Includes nylon split ring
Includes two combustion seals

Most Sold 2018 Chevrolet Equinox Air Flow Sensors

Explore our best-selling Chevrolet parts for the 2018 Equinox among 9 OEM and aftermarket options starting from $1.49.

show more show less

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$65.99

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$10.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$54.99

GM Genuine Parts Multi Purpose Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$49.99

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$47.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$31.49

GM Genuine Parts Manifold Absolute Pressure (MAP) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$10.99

This ambient air temperature sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this ambient air temperature sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – this sensor is a reliable replacement for an original part that has failed due to fatigue or electrical malfunction
Durable construction – this sensor is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.99

SPLASH SHLD COWL RET

Top-Rated Fuel and Emissions Systems Brands For Your 2018 Chevrolet Equinox

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2018 Chevrolet Equinoxes. Below you’ll find some of our best rated Fuel and Emissions Systems from Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2018 Equinox start at just $11.99 and are rated as high as 4.4 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2018 Chevrolet Equinox Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2018 Chevrolet Equinox, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Fuel and Emissions Systems, specifically designed for the 2018 Chevrolet Equinox. With over 3 Carquest Premium brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $14.86. Plus, with over 8 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

from $16.79

(1)

Keyed Alike Locking Fuel Cap

“Work geeat”

from $15.79

(4)

Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack

“Fits and works as expected.”

FAQs for 2018 Chevrolet Equinox Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2018 Chevrolet Equinoxes?

Out of 75 Fuel and Emissions Systems that fit 2018 Chevrolet Equinoxes, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Non-Locking Tethered Fuel Tank Cap (12102600) – $24.29
Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (11410320) – $69.99

What’s the price range for 2018 Chevrolet Equinox Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2018 Chevrolet Equinox start at $1.49 and go up to $264.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2018 Chevrolet Equinox?

The average price for Fuel and Emissions Systems for the 2018 Chevrolet Equinox is $66.08. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Equinox model years?

Yes, we currently carry Fuel and Emissions Systems for 20 model years of Chevrolet Equinoxes between 2005 and 2026. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015, and 2014.

What are the cheapest Fuel and Emissions Systems for my 2018 Chevrolet Equinox?

The cheapest 2018 Chevrolet Equinox Fuel and Emissions Systems we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
SPLASH SHLD COWL RET (50231732) – $4.99
Keyed Alike Locking Fuel Cap (10069213) – $7.99
Non-Locking Fuel Tank Cap (18481525) – $9.99
Ambient Air Temperature Sensor (12471558) – $10.99

What types of Fuel and Emissions Systems do you sell for my 2018 Chevrolet Equinox?

As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 2018 Chevrolet Equinox:

Can I get help with 2018 Chevrolet Equinox Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Equinox Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Equinox Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Chevrolet Equinox Fuel and Emissions Systems

ACDelco – Vapor Canister Vent (Part No.84802774)

Carquest Premium – Fuel Pump Driver Module (Part No.FPE1094)

DENSO – Oxygen Sensor: 4 Wire, 12.60" Long, Heated, Exact Fit (Part No.234-4647)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

GM Genuine Parts – Fuel Pressure Sensor (Part No.13500745)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10002)

GM Genuine Parts – Fuel Injector O-Rings (Part No.12673056)

Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1001)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1048)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61912)

Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-079)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Dorman – SPLASH SHLD COWL RET (Part No.963-230D)

GM Genuine Parts – Mechanical Fuel Pump Assembly (Part No.HPM1010)

Carquest Premium – Multi-Purpose Relay (Part No.RAA2651)

GM Genuine Parts – Exhaust Gas Recirculation (EGR) Valve (Part No.12633889)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1069)

Dorman – Fuel Filler Neck (Part No.574-378)

GM Genuine Parts – Vacuum Pump (Part No.12686657)

Carquest Premium – Air Charge Temperature Sensor (Part No.ECC1447)

GM Genuine Parts – Mass Airflow Sensor with Intake Air Temperature Sensor (Part No.213-4222)

Carquest Premium – Premium GDI Seal Tool Kit (Part No.ATK-001)

ACDelco – Air Pressure Sensor (Part No.12711681)

GM Genuine Parts – Fuel Injection Fuel Rail O-Ring (Part No.12659782)

NTK – Titania Oxygen Sensor: 3 Wire, 10.75" Long, Heated, Direct Fit (Part No.27016)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

GM Genuine Parts – Direct Fuel Injector Assembly (Part No.55577403)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)

NTK – Switching Oxygen Sensor: 4 Wire, 12.75" Long, Heated, Direct Fit (Part No.21580)

GM Genuine Parts – Heated Oxygen Sensor (Part No.12661898)

Bosch – Wideband Oxygen Sensor: 4 Wire, 12.1" Long, Heated, Exact Fit (Part No.16459)

NTK – Switching Oxygen Sensor: 4 Wire, 12" Long, Heated, Direct Fit (Part No.21071)

DENSO – Oxygen Sensor: 4 Wire, Direct Fit, Heated, Wire Length: 14.76" (Part No.234-8085)

GM Genuine Parts – Heated Oxygen Sensor (Part No.12701634)

DENSO – Oxygen Sensor: 4 Wire, Direct Fit, Heated, Wire Length: 12.20" (Part No.234-8051)

ACDelco – Fuel Pump Power Control Module (Part No.23382564)

GM Genuine Parts – Mechanical Fuel Pump Assembly (Part No.HPM1010)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12410)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Locking Fuel Tank Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Tank Cap (Part No.10507)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Carquest Premium – Locking Diesel Fuel Tank Cap (Part No.10501D)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Motorad – Locking Tethered Diesel Fuel Tank Cap (Part No.MGC517T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)

Carquest Premium – New Mass Air Flow Sensor – Sensor Only (Part No.MQ6396)

GM Genuine Parts – Mass Airflow Sensor (Part No.23366103)

Hitachi – Mass Air Flow Sensor (Part No.MAF0129)

GM Genuine Parts – Mass Airflow Sensor (Part No.23262344)

GM Genuine Parts – Direct Fuel Injector Assembly (Part No.55577403)

GM Genuine Parts – Mass Airflow Sensor (Part No.23324767)

Carquest Premium – Remanufactured GDI Fuel Injector (Part No.A511-1103)

Hitachi – Mass Air Flow Sensor (Part No.MAF0128)

GM Genuine Parts – Indirect Fuel Injector Kit with Clamps, Seals, Ret (Part No.217-3425)

Hitachi – Mass Air Flow Sensor (Part No.MAF0119)

Delphi – Mass Air Flow Sensor (Part No.AF10682)

GM Genuine Parts – Direct Fuel Injector Kit with Spacer and Seals (Part No.12662571)

Carquest Premium – Premium GDI Seal Tool Kit (Part No.ATK-001)

Carquest Premium – Remanufactured GDI Fuel Injector (Part No.A511-1233)

GM Genuine Parts – Fuel Injector O-Rings (Part No.12673056)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61912)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS077)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)