2018 Chevrolet Corvette Engine Cold Air Intakes

Unique Computer Design Carbon Fiber Housing W/ Sight Window: The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our patent pending filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the air box. The housing is made out of lightweight high gloss, clear-coated plain weave carbon fiber and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. Lightweight high gloss clear-coated plain weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Two billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum line. This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7″ oval flange and is 8-1/2″ tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic “oil-free” media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Large 5-Layer Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7″ oval flange and is 8-1/2″ tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Also included in the kit is a Black Series serialized plate to assure the authenticity of the intake. Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available.

Product Features:

• High Gloss Clear Coated Weave Carbon Fiber Housing And Tube
• Built In Sight Window Provides Easy Inspection
• Unique Filter-To-Housing Interface For Easy Install
• Serialized Black Series Plate For Authenticity

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:

• 25% Flow Increase
• Outflows Factory Intake By 25%
• Unique Filter-To-Housing Interface For Easy Installation
• Incl. Both Pro DRY S Oil Free and Pro 5R Oiled Filters

The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our patent pending filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. One billet aluminum fitting is mounted on the tube to provide a perfect connection with the factory vacuum line. This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7″ oval flange and is 8-1/2″ tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic “oil-free” media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Inspection of Filter Without Disassembly
• Roto Molded Intake Tube
• No Cutting Or Drilling On Factory Parts For Faster Installation

The smooth one-piece sealed housings with auxiliary air inlets are used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. Large, clear sight windows are used for a hassle-free filter inspection and an aggressive style. This System uses CAD designed, dyno-tuned, roto-molded intake tubes to achieve maximum power gains while maintaining a perfect fit. This intake system utilizes oil-free, large 5″ tall conical 360 degree radial flow performance air filters with 3-Layer progressively finer porosity synthetic media for maximum convenience. Premium clamps are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Unique 1-Piece Housing
• Washable And Reusable Filter For Maximum Performance
• Premium Hardware