2018 Chevrolet Colorado Towing Products

Essential 2018 Chevrolet Colorado Towing Products

Husky Towing – Class Iii, Round Tube, 2"Receiver, 6000Lb Weight Carrying/ 900Lb Tongue Weight (Part No.69531C)

Class Iii, Round Tube, 2"Receiver, 6000Lb Weight Carrying/ 900Lb Tongue Weight

from

$364.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
See More

Husky Towing – Rear Trailer Hitch: 2" Receiver, 8000 LB Capacity, Drilless Install, Installs In As Low As 60 Mins! (Part No.69534C)

Rear Trailer Hitch: 2" Receiver, 8000 LB Capacity, Drilless Install, Installs In As Low As 60 Mins!

from

$344.99
Husky offers a full line of unique hitch models to provide a custom fit for nearly every vehicle on the road today. Husky receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry-leading, rust-resistant finish.

Product Features:
  • Manufactured With A Vehicle-Specific Design For A Custom Fit
  • Precisely-Welded For Superior Strength And Fit
  • Co-Cured In A Rust-Resistant Liquid Bonderite (R) Coating
  • Strengthened With A Welded, Seamless Collar
  • Open-Back Receiver For Easy Cleaning
  • Limited Lifetime Warranty
See More

CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 30 Mins (Part No.13203)

Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 30 Mins

from

$209.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Colorado and GMC Canyon (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 900 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 6,000 lbs. gross trailer weight and 900 lbs. tongue weight
  • Compatible with weight distribution hitch (8,000 lbs. WD / 900 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 2" Receiver, 8,000 LB Capacity, Installs as low as 30 Mins (Part No.13176)

Trailer Hitch: 2" Receiver, 8,000 LB Capacity, Installs as low as 30 Mins

from

$229.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the GMC Canyon and Chevy Colorado (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 8,000 lbs. GTW and 800 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 8,000 lbs. gross trailer weight and 800 lbs. tongue weight
  • Compatible with weight distribution hitch (10,000 lbs. WD / 1,000 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

CURT – Custom Wiring Harness (5-Way Flat Output) (Part No.56510)

Custom Wiring Harness (5-Way Flat Output)

from

$87.99
A CURT custom wiring harness (also called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring harnesses come into play. Custom wiring harnesses plug into your vehicle’s electrical system using original equipment (OEM) connectors. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle’s power system. This harness provides a 5-way flat connector socket and comes with a circuit-protected converter. It is designed to be a custom wiring harness for certain years of the Chevrolet Colorado, GMC Canyon pickup, Isuzu I-280 or I-350 pickup or Isuzu I-290 or I-370 pickup (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). CURT custom wiring harnesses are long-lasting and quick to install. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 5-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 5-way flat connects tail lights, brake lights, turn signals and reverse lights
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Hopkins – 40974, Multi-Tow® Exact Fit OEM replacement 7 Blade and 4 Flat Towing Connector (Part No.40974)

40974, Multi-Tow® Exact Fit OEM replacement 7 Blade and 4 Flat Towing Connector

from

$39.99
Tow more than one trailer? This exact OEM replacement Multi-Tow® design features multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:
  • Multi-Tow® provides multiple towing options from one connector
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors create an exact fit and maximum weatherproofing
  • Impact and corrosion resistant
  • Pre-greased terminals for added protection
  • Includes Step-By-Step Instructions
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.56258)

Custom Wiring Harness (4-Way Flat Output)

from

$87.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Lincoln MKZ (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1255)

Trailer Connector Kit

from

$62.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:
  • Carquest Premium electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
See More

CARR – Cab Mount, Direct-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.103331)

Cab Mount, Direct-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum

from

$174.99
Carr Truck Steps combine stylish accents with a rugged off-road look. A Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. CARR’s new Xtreme Black Powder Coat finish features a lightly textured matte finish that resists scratching, peeling and fading.

Product Features:
  • Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
  • Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
  • Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
  • Strong Construction To Hold Up Under Extreme Conditions
  • Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
  • Exclusive New Multi Mount System
  • Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
See More

Dorman – Trailer Brake Control Switch – Circuit Board – OE Fix (Part No.601-237)

Trailer Brake Control Switch - Circuit Board - OE Fix

from

$56.99
When the original trailer brake control module circuit board fails on certain General Motors vehicles, the dealer solution is to replace the entire trailer brake control module assembly. This Dorman OE FIX circuit board allows the direct replacement of only the failed circuit board, saving significant repair expense.

Product Features:
  • Trailer Brake Control Switch – Circuit Board
  • Trailer Brake Control Switch – Circuit Board – OE Fix
  • Saves money – this direct-replacement trailer brake control module circuit board reduces repair cost by eliminating the need to replace entire failed module assembly
  • Seamless installation – designed to precise specifications for an exact fit and performance that matches the original equipment circuit board
See More

CURT – Dual-Output 7/4-Way Connector (Plugs into USCAR) (Part No.55774)

Dual-Output 7/4-Way Connector (Plugs into USCAR)

from

$31.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

Husky Towing – Vehicle Side, 7-Way Round, Without Lead Wire (Part No.30175)

Vehicle Side, 7-Way Round, Without Lead Wire

from

$18.29
Husky Towing Products offer innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.

Product Features:
  • Durable Lid Opens 180 Degrees
  • Ultimate Weatherproofing
  • Compatible With Ford, GM And Other Popular Tow Vehicles
  • Plug-In Simple(R) For Quick And Easy Installation Or Replacement
See More

Hopkins – 40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit (Part No.40955)

40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit

from

$39.99
Tow more than one trailer? Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:
  • Multi-Tow® provides multiple towing options from one connector
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors create an exact fit and maximum weatherproofing
  • Includes mounting bracket and hardware
  • Impact and corrosion resistant
  • Fits in standard 7 blade bracket
  • Includes Step-By-Step Instructions
See More

CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)

Dual-Output 6/4-Way Connector (Plugs into USCAR)

from

$46.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:
  • Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
  • Fits USCAR-equipped vehicles with factory tow plugs only
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • 6-way round socket adds connection for electric brakes and auxiliary power
  • Dust covers included to keep connectors clean when not in use
  • Slit loom keeps wires contained and well protected
  • Metal bracket securely mounts wiring to the vehicle or trailer hitch
See More

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

from

$38.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:
  • 60 inch length
  • Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
  • Double-molded weatherproof design
  • Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
  • Includes 4 wire flat extension
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Hopkins – 41165, CHEVROLET / GMC Vehicle Specific Towing Wiring Kit (Part No.41165)

41165, CHEVROLET / GMC Vehicle Specific Towing Wiring Kit

from

$38.99
Don’t splice onto your vehicle’s factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicle’s independent lights to the trailer’s common lights. Required accessories are included to get you towing faster.

Product Features:
  • Plug-In Simple!® Wiring Kit
  • Utilizes OEM connectors for enhanced fit and weatherproofing
  • Includes vehicle side 4 flat
  • Corrosion resistant terminals
  • Impact and corrosion resistant
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Step-By-Step Instructions
See More

Dee Zee – Dee Zee Headache Rack Mount, Rectangle, Black, Without Light, Side Mount (Part No.DZ95064)

Dee Zee Headache Rack Mount, Rectangle, Black, Without Light, Side Mount

from

$46.49
Add light mounts to your Dee Zee Aluminum or Steel Headache Rack or Rear Rack. With these convenient mounts that slide into the built in channel system, mounting your auxiliary lights is quick and easy. Several size options to meet your needs.

Product Features:
  • Made From Rugged Steel
  • Protective Gloss Black Powder Coat Finish
  • Utilize The Accessory Channel On Aluminum Cab Racks
  • Several Size Options To Meet Your Needs
  • Made In USA
See More

Dee Zee – Inside Truck Bed Mount, Black, Aluminum, 2 Piece (Part No.DZ97903)

Inside Truck Bed Mount, Black, Aluminum, 2 Piece

from

$27.99
Tying down cargo in the bed of your truck should not be a struggle. You just need solid anchor points to secure the load properly. Dee Zee Tie Downs offer an easy way to add these anchor points- for a secure tie down every time. Do not worry about drilling your baby either because our tie downs fit into existing truck bed locations for both GM and Ford trucks and come with all the mounting hardware needed for an easy install. Dee Zee Tie Downs are made of cast aluminum with a black powder coated finish and rated for the maximum strength of your truck bed.

Product Features:
  • Tie Down Anchor For Cargo
  • Cast Aluminum Finish
  • Fits Into Integrated Channel In Cab Rack
  • No Drilling Required
See More

2018 Chevrolet Colorado Towing Products

You count on your 2018 Chevrolet Colorado to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 25 Towing Products ranging in price from $20.99 to $364.99, you’re sure to find everything you need for your 2018 Chevrolet Colorado.

Brands matter. If you want to shop a specific Towing Products brand, we stock 7 different brands like Hopkins, CURT, and Husky. 2018 Chevrolet Colorado Towing Products start as low as $20.99!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 400 extensive product reviews on 2018 Chevrolet Colorado Towing Products. Some of the top-rated Towing Products products we carry are Rear Trailer Hitch: 2" Receiver, 8000 LB Capacity, Drilless Install, Installs In As Low As 60 Mins! with 1.0 stars.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 2018 Chevrolet Colorado below to get started!

Top-Rated Towing Products Brands For Your 2018 Chevrolet Colorado

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2018 Chevrolet Colorado running right for years to come. In our inventory you’ll find brands like Hopkins, CURT, Husky, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Wiring. All are waiting to get your 2018 Chevrolet Colorado back on the road. Some of the top-rated Hopkins products in these categories are:
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
from $39.99
(20)
40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit
Trailer Wiring Harness

FAQs for 2018 Chevrolet Colorado Towing Products

What are the most purchased Towing Products for the 2018 Chevrolet Colorado?

Out of 25 Towing Products for the 2018 Chevrolet Colorado, the most popular in our inventory are:
Dual-Output 7/4-Way Connector (Plugs into USCAR)
from $31.49
This product is not rated
Dual-Output 7/4-Way Connector (Plugs into USCAR)
Trailer Wiring Harness
Replacement USCAR Socket with 24in. Wires (Vehicle Side)
from $24.99
This product is not rated
Replacement USCAR Socket with 24in. Wires (Vehicle Side)
Trailer Wiring Kits
Replacement OE 4-Way Flat Socket (T s into USCAR)
from $33.49
This product is not rated
Replacement OE 4-Way Flat Socket (T s into USCAR)
Trailer Wiring Kits

What are the top-rated 2018 Chevrolet Colorado Towing Products?

Top-rated Towing Products for your 2018 Chevrolet Colorado based on customer reviews/ratings are:
Rear Trailer Hitch: 2" Receiver, 8000 LB Capacity, Drilless Install, Installs In As Low As 60 Mins!
from $344.99
(1)
Rear Trailer Hitch: 2" Receiver, 8000 LB Capacity, Drilless Install, Installs In As Low As 60 Mins!
“3/16″ too narrow – no way to mount onto the frame. Also, the frame has 90-deg corners and this has mounting flanges that have a small radius, so even”