2018 Cadillac Escalade Steering and Chassis Parts
Find Your Specific 2018 Cadillac Escalade Steering and Chassis Parts
Below you will find various in-demand Cadillac Steering and Chassis Parts, components and accessories for your 2018 Escalade. Advance Auto Parts has popular Escalade parts like Tie Rods, Ball Joints, Steering Shafts and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Escalade model years including
2014,
2015,
2016,
2017,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2018 Cadillac Escalade Steering and Chassis Parts below and start saving instantly.
Popular 2018 Cadillac Escalade Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2018 Cadillac Escalades
Rare Parts – Cam Bolt Kit (Part No.RP16528)
from
$44.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves vehicle handling
- Restores OE alignment
- Improves steering geometry
- Easy camber adjustment
Driveworks – Alignment Kit – Front (Part No.DW-K100026)
from
$46.99
Alignment Kit – Front
Carquest Premium – TIE ROD END (Part No.300-65142)
from
$95.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Thread locking compound included.
MOOG – Tie Rod End (Part No.EV801345)
from
$53.99
Tie Rod End
Dorman – Coupling Steering Shaft (Part No.425-185)
from
$293.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
MTC – Steering Shaft (Part No.M50101703660MTC)
from
$180.77
Steering Shaft
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-461)
from
$13.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Stabilizer Bar Bushing Kit (Part No.K6437)
from
$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
ACDelco – Black Multi-Purpose Pigtail Kit with Splices (Part No.PT2887)
from
$59.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1402)
from
$62.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Rare Parts – Sway Bar Link (Part No.RP17359)
from
$40.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
TRW – Stabilizer Link Kits (Part No.L1029413478TRW)
from
$27.82
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.
Product Features:
See More
Product Features:
- Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
- Provides improved fuel economy, lower emissions and excellent driving comfort
- Reduce weight and damping vibrations
- Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
MOOG – Caster/Camber Adjusting Kit (Part No.K100159)
from
$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Caster/Camber Adjusting Kit (Part No.K100026)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Camber/Caster Adjusting Plate (Part No.K80277)
from
$7.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Problem Solver Quick Cam replaces the nonadjustable outboard OEM cam
- Quick Cam camber adjustment range from negative 2.2 to positive 2.5 Degrees
- Easy access Allen wrench slot enables fast and easy caster/camber adjustment
- Quick Cam works with the OEM bolt, significantly reducing installation time
Dorman – Help – Camber Alignment Washers (Part No.13130)
from
$9.49
This alignment caster and camber cam is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Alignment Guide Pin, sold by each (Part No.K6716)
from
$43.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replaces broken OEM pins
- Box of 12
MOOG – Alignment Guide Pin (Part No.K100206)
from
$71.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Dorman – Suspension Stabilizer Bar (Part No.927-101)
from
$199.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models.
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish.
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Dorman – Sway Bar Rear (Part No.927-141)
from
$125.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models.
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish.
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Dorman – Sway Bar Front (Part No.927-140)
from
$202.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models.
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish.
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620889)
from
$258.99
Product Features:
See More
- PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer
Dorman – Suspension Control Arm (Part No.521-024)
from
$125.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
TRW – Sway Bar Bushing Kit (Part No.L1049451729TRW)
from
$35.91
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
MOOG – Stabilizer Bar Bushing Kit (Part No.K6453)
from
$27.49
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Rare Parts – Ball Joint (Part No.RP10922)
from
$67.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
ACDelco – Professional Ball Joint (Part No.L2020577192ACD)
from
$155.58
ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.
Product Features:
See More
Product Features:
- Superb strength and durability thanks to precision manufactured housing and components
- Advanced corrosion protection against the harshest conditions
- Permanently attached boot reduces contamination, makes installation easier
- Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
- No spring means no end play, easier installation
- One-piece forged housing for easier steering
Carquest Premium – Ball Joint (Part No.400-95560)
from
$69.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Knurling improves retention between the control arm/knuckle and ball joint housing
- Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
Upgrade your 2018 Cadillac Escalade with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2018 Cadillac Escalade, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Escalade functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Steering and Chassis Parts for the 2018 Cadillac Escalade, designed to meet your needs without breaking the bank.
From
Tie Rod
replacements to
Ball Joints
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2018 Cadillac Escalade at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $5.99 to $271.99, with
an average price of $86.37.
Our 56 Steering and Chassis Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2018 Cadillac Escalade without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Cadillac Escalade, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog Driveworks, and more.
Moog Steering and Chassis Parts
start at just $7.79 and boast an impressive 4 stars average rating from customers.
With 2,008 customer reviews and counting, our 2018 Cadillac Escalade Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2018 Cadillac Escalade is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade in top shape, all in one place.
Start shopping confidently below for your 2018 Cadillac Escalade!
Best-Selling Tie Rods for 2018 Cadillac Escalades
Enhance the driving experience in your Cadillac with 7 quality Tie Rod components, starting at $33.99.
MOOG – Tie Rod End (Part No.EV800938)
from
$70.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Carquest Premium – Tie Rod End (Part No.310-537238)
from
$41.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Carquest Premium – Tie Rod End (Part No.700-537237)
from
$33.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Thread locking compound included.
MOOG – Tie Rod End (Part No.ES800948)
from
$88.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Rare Parts – Tie Rod End (Part No.RP29402)
from
$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP29394)
from
$116.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Autopart International Inc – Tie Rod End (Part No.M30101912939API)
from
$63.19
Tie Rod End
Most Popular 2018 Cadillac Escalade Ball Joints
Customize your Cadillac with 16 Ball Joints products
like Lower Ball Joints and
Lower Control Arm and Ball Joints, all
priced under $271.99.
MOOG – Ball Joint (Part No.K500408)
from
$68.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
MOOG – Control Arm and Ball Joint Assembly (Part No.RK623125)
from
$152.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Ball Joint (Part No.K500340)
from
$65.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Control Arm and Ball Joint Assembly (Part No.RK623126)
from
$152.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623299)
from
$271.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK623298)
from
$271.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.527-062)
from
$58.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620889)
from
$258.99
Product Features:
See More
- PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK620888)
from
$253.99
Product Features:
See More
- PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK623126)
from
$246.99
Product Features:
See More
- PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer
MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK623125)
from
$246.99
Product Features:
See More
- PROBLEM SOLVER GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shield socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- QUIET OPERATION — Premium pre-installed bushings with optimized stiffness inhibit noise for a more comfortable ride
- RIGOROUS TESTING — Tested to handle loads exceeding those required by the manufacturer
Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.527-064)
from
$208.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm And Ball Joint Assembly (Part No.527-063)
from
$208.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Carquest Premium – Control Arm with Ball Joint (Part No.810-610112B)
from
$129.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Hardware included for easier installation
Carquest Premium – Control Arm with Ball Joint (Part No.810-610111B)
from
$129.99
CARQUEST Premium Control Arms are engineered and benchmarked to Original Equipment (OE) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Each part number in the Carquest Premium Control Arm line is designed and built to deliver the quality that professionals demand.
Product Features:
See More
Product Features:
- Application specific, direct fitment for trouble-free installation. Engineered OE Form, Fit, and Function.
- Pre-installed ball joints and bushings (when applicable) for easy installation
- Hardware included for easier installation
Dorman – Suspension Control Arm (Part No.527-061)
from
$58.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Top Picks for 2018 Cadillac Escalade Steering Shafts
Upgrade Cadillac Escalades with top-quality Steering Shafts parts, including 2 OEM and aftermarket selections for your 2018 model.
Dorman – Intermediate Steering Shaft (Part No.425-183)
from
$104.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision.
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Dorman – Lower Steering Shaft (Part No.425-120)
from
$207.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
In-Demand Sway Bars for 2018 Cadillac Escalades
Select from 24 premium Sway Bars parts for your 2018 Cadillac Escalade, with prices ranging from $5.99 to $202.99.
MOOG – Stabilizer Bar Bushing Kit (Part No.K200222)
from
$15.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – Sway Bar Link Kit (Part No.DW-K6700)
from
$37.49
Sway Bar Link Kit
MOOG – Stabilizer Bar Bushing Kit (Part No.K6408)
from
$24.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Driveworks – Stabilizer Bar Link (Part No.DW-K700432)
from
$12.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
MOOG – Stabilizer Bar Link Kit (Part No.K700538)
from
$23.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG – Stabilizer Bar Link (Part No.K6700)
from
$49.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Dorman – Sway Bar Front (Part No.927-140)
from
$202.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models.
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish.
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Dorman – Stabilizer Bar Bushing Kit (Part No.928-344)
from
$44.49
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components.
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Carquest Premium – Stabilizer Bar Link (Part No.500-258837)
from
$17.79
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
MOOG – Stabilizer Bar Bushing Kit (Part No.K201174)
from
$24.49
Backed by superior materials and rigorous testing, MOOG synthetic fabric lined sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- INNOVATIVE DESIGN — Synthetic fabric lining paired with a high-quality natural rubber material promotes durability
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation that eliminates the need for lubrication and maintenance
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Incorporates proven design and engineering features
- Inner sleeve is phosphate coated for corrosion protection
Carquest Premium – Stabilizer Bar Link Kit (Part No.500-610141)
from
$15.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Link Kit (Part No.RP15645)
from
$28.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
MOOG – Stab Bar Bushing Kit (Part No.K202000)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Natural rubber material with synthetic fabric lining
- Split design allows for easier installation
- Replacement can reduce front end noise
- Restores like-new steering and handling
- Bushings engineered for long life and dependability
- Incorporates proven design and engineering features
Rare Parts – Stab Bar Link Kit (Part No.RP22200)
from
$33.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Dorman – Suspension Sway Bar Bracket Kit (Part No.928-564)
from
$81.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles..
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles.
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Autopart International Inc – Sway Bar Link (Part No.L10302539732API)
from
$45.16
Sway Bar Link
Carquest Premium – Stabilizer Bar Link (Part No.540-258913)
from
$43.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Rare Parts – Sway Bar Bushing (Part No.RP22892)
from
$27.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
TRW – Sway Bar Bushing Kit (Part No.L1049451786TRW)
from
$21.91
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that TRW parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
- Acoustic measurements to ensure driver comfort
- Strength tests for durability
- Environmental resistance tests for all weather conditions
- Wear and drive tests
- Assembly technique testing of all critical safety features
- Dynamic testing of complete units to ensure leak free performance
- Extensive on-road testing at TRW tracks around the world
Rare Parts – Sway Bar Link Kit (Part No.RP19884)
from
$21.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Complete with bolt ,washers, and nut
- Improves body roll
Rare Parts – Sway Bar Fr Bush (Part No.RP19677)
from
$20.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-461)
from
$13.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
TRW – Sway Bar Bushing (Part No.L1050288743TRW)
from
$11.78
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Sway Bar Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
Carquest Premium – Sway Bar Bushing (Part No.224-713088)
from
$5.99
CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Engineered to reduce road noise and provide a stable ride.
- Hardware included for easier installation (where applicable)
Most Sold 2018 Cadillac Escalade Alignment Hardware
Explore our best-selling Cadillac parts for the 2018 Escalade among 3 OEM and aftermarket options starting from $43.49.
MOOG – Caster/Camber Adjusting Kit (Part No.K100159)
from
$72.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Caster/Camber Adjusting Kit (Part No.K100026)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Guide Pin, sold by each (Part No.K6716)
from
$43.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replaces broken OEM pins
- Box of 12
Top-Rated Steering and Chassis Parts Brands For Your 2018 Cadillac Escalade
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2018 Cadillac Escalades. Below you’ll find some of our best rated Steering and Chassis Parts from Moog and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2018 Escalade start at just $7.79 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 2018 Cadillac Escalade Steering and Chassis Parts
When it comes to maintaining or upgrading your 2018 Cadillac Escalade, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2018 Cadillac Escalade. With over 22 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.79, with an average price of just $113.21. Plus, with over 175 customer reviews and an average rating of 4 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Driveworks 2018 Cadillac Escalade Steering and Chassis Parts
Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2018 Cadillac Escalade owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2018 Escalade, Advance Auto Parts carries a full inventory of 3 Driveworks Steering and Chassis Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $12.99 to $46.99, plus, with more than 71 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
FAQs for 2018 Cadillac Escalade Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2018 Cadillac Escalades?
Out of 56 Steering and Chassis Parts that fit 2018 Cadillac Escalades, the following parts are the top sellers:
- Stabilizer Bar Link (12097282) – $17.79
- Alignment Guide Pin, sold by each (20516409) – $43.49
- Stabilizer Bar Bushing Kit (20516572) – $24.99
What’s the price range for 2018 Cadillac Escalade Steering and Chassis Parts?
Steering and Chassis Part prices for the 2018 Cadillac Escalade start at $5.99 and go up to $271.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2018 Cadillac Escalade?
The average price for Steering and Chassis Parts for the 2018 Cadillac Escalade is $86.37. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Cadillac Escalade model years?
What are the cheapest Steering and Chassis Parts for my 2018 Cadillac Escalade?
The cheapest 2018 Cadillac Escalade Steering and Chassis Parts we carry in stock are:
- Sway Bar Bushing (12591563) – $5.99
- Camber/Caster Adjusting Plate (20517395) – $7.79
- Sway Bar Bushing (12051012) – $11.78
- Stabilizer Bar Link (11050002) – $12.99
- Suspension Stabilizer Bar Bushing Kit (50211976) – $13.99
What are the top-rated Steering and Chassis Parts that fit the 2018 Cadillac Escalade?
Out of 2,008 reviews by customers, our 2018 Cadillac Escalade Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2018 Cadillac Escalade and their top-rated products:
- Tie Rods
- Tie Rod End (11240177) – $70.99
- Sway Bars
- Tie Rod End (11240177) – $70.99
What types of Steering and Chassis Parts do you sell for my 2018 Cadillac Escalade?
As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2018 Cadillac Escalade:
Can I get help with 2018 Cadillac Escalade Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Steering and Chassis Parts and more.
What is your return policy for Cadillac Escalade Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Cadillac Escalade Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
