2018 Cadillac Escalade Exhaust Parts
Find Your Specific 2018 Cadillac Escalade Exhaust Parts
Below you will find various in-demand Cadillac Exhaust Parts, components and accessories for your 2018 Escalade. Advance Auto Parts has popular Escalade parts like Exhaust Gaskets, Exhaust Hangers, Exhaust Fittings and more. You’ll also find aftermarket and OEM Exhaust Parts for other Escalade model years including
2013,
2014,
2015,
2016,
2017,
2019,
2020,
2021,
2022 and more. Select a category of 2018 Cadillac Escalade Exhaust Parts below and start saving instantly.
Popular 2018 Cadillac Escalade Exhaust Parts Categories
Essential Exhaust Parts for 2018 Cadillac Escalades
MBRP Exhaust – Ss, With Muffler, 3"Dia Pipe, Single Exhaust With Side Single Exit, 4"Ss Tip (Part No.S5043304)
from
$852.99
ARMOR PRO Series exhaust systems are crafted out of T304 Stainless Steel – the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. it is the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine cylinders, allowing it to produce more power and improve vehicle performance and longevity.
Product Features:
See More
Product Features:
- T304 Stainless Steel Construction
- T304 Stainless Steel Tubing Is Easy To Clean And Maintain
- Comes With 4 Inch OD Tip
Dynomax – Single – 3in Cat-Back Exhaust System – Ultra Flo Welded Stainless Steel Muffler (Part No.19361)
from
$467.99
Give your Chevrolet Avalanche, Suburban or Yukon XL 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- COMPATIBILITY : Designed for 2002-2006 Chevrolet Avalanche 1500 and 2001-206 Chevrolet Suburban and Yukon 1500; see product information for compatibility and engine specifications
- COMPLETE SOLUTION : Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
- EASY TO INSTALL : Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY : 3-in. Aluminized-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- SUPERIOR PERFORMANCE : Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,800 SCFM
- PREMIUM ACOUSTIC CONTROL : Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
- ENGINEERED TO LAST : Muffler features stainless-steel construction with a micro-finish for lifelong protection and 100% welded design for maximum durability
- NOTES : 4-in. Outlet buffed and polished stainless-steel slant cut tip; 3-in. straight cut tail pipes
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15666)
from
$839.99
The MagnaFlow Street Series Cat-Back Performance Exhaust System 15666 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15666 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15666 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
Walker – Exhaust System Hanger Insulator (Part No.35229)
from
$8.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.52617)
from
$1642.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52617. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52617 includes (1) Torca Clamp, (1) Crush Ring Gasket and interchanges with OE parts 19420265, 19420284, 22948166, 23111625, 84362281. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Walker – CalCat CARB Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.81723)
from
$892.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
Walker – CalCat CARB Direct-Fit Catalytic Converter – 2.99" Outlet (OD) (Part No.83482)
from
$1126.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.
Product Features:
See More
Product Features:
- CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
- SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
- BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty
JBA Performance – 1850S-1Js 1 5/8" Header Shorty Stainless Steel 99-02 Gm Truck 6.0L Silver Ceramic (Part No.1850S-1JS)
from
$881.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1850S-1JS 1 5/8″ Header Shorty Stainless Steel 99-02 GM Truck 6.0L Silver Ceramic
- Mandrel bent stainless steel tube
Dorman – Direct Fit Exhaust Manifold: with Heat Shield (Part No.674-525)
from
$109.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
JBA Performance – 1850S-2 1 5/8" Header Shorty Stainless Steel 02-2013 GM Truck/SUV 4.8/5.3L and 07-13 6.0/6.2L (Part No.1850S-2)
from
$696.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1850S-2 1 5/8″ Header Shorty Stainless Steel 02-2013 GM Truck/SUV 4.8/5.3L and 07-13 6.0/6.2L
- Mandrel bent stainless steel tube
Felpro – Exhaust Manifold Gasket Set (Part No.MS 94054)
from
$26.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
GM Genuine Parts – Exhaust Manifold Gasket (Part No.12617944)
from
$19.99
GM Genuine Parts Exhaust Manifold Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They help form a gas-tight connection between the exhaust manifold and cylinder heads. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Helps prevent exhaust leaks
- Helps provide a tight seal where the exhaust manifold mounts to the engine block
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
MAHLE Original – Exhaust Manifold Gasket Set (Part No.MS16124)
from
$35.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
BRExhaust – Exhaust Pipe Flange Gasket (Part No.256-1054)
from
$18.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Felpro – Exhaust Pipe Flange Gasket (Part No.61014)
from
$6.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61561)
from
$12.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit – 3/8-16 In. (Part No.03401)
from
$11.99
Our Exhaust Stud and Nut provides you with the proper stud and nut for repairing or installing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.32110)
from
$31.99
This engine manifold stud and nut match the fit and function of the original hardware on specific makes and models. Ensure a thorough manifold repair or installation with this durable and reliable hardware.
Product Features:
See More
Product Features:
- Direct replacement – this engine manifold stud and nut match the fit and function of the original stud and nut on specified years, makes and models
- Ideal solution – replaces missing or damaged hardware to ensure a thorough manifold installation or repair
- Durable construction – made of quality materials for reliable service life
- Quality assured – backed by a team of product engineers based in the United States
Felpro – Exhaust Manifold Hardware Kit (Part No.ES 75119)
from
$33.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413)
from
$19.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Repair Clamp (OE Fix) (Part No.926-610)
from
$26.99
Exhaust Manifold Repair Clamp (OE Fix)
Dorman – Exhaust Manifold Clamp Repair (OE Fix) (Part No.917-107)
from
$59.99
When an exhaust manifold fastener breaks on certain General Motors and Isuzu vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp saves time by creating a seal without needing to extract the broken stud.
Product Features:
See More
Product Features:
- Saves time – When an exhaust manifold fastener breaks, this exhaust manifold repair clamp saves time by creating a seal without needing to extract the broken stud
- Location-specific – engineered to fit the exhaust manifold on specified GM and Isuzu vehicles on the front right on vehicles without EGR valve, or rear left
- Complete kit – includes clamp and fasteners for a thorough, secure repair
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Felpro – EXHAUST MANIFOLD BOLT SET (Part No.ES 75120)
from
$27.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Walker – Exhaust Clamp (Part No.35335)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35793)
from
$3.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS : Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality material for durability and long life
- BETTER TOGETHER : Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS : Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality material for durability and long life
- BETTER TOGETHER : Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Upgrade your 2018 Cadillac Escalade with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2018 Cadillac Escalade, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Exhaust Parts are key to keeping your Escalade functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Exhaust Parts for the 2018 Cadillac Escalade, designed to meet your needs without breaking the bank.
From
Exhaust Gasket
replacements to
Exhaust Hangers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2018 Cadillac Escalade at great prices.
Our Exhaust Parts inventory for this model
ranges from just $5.99 to $1,642.99, with
an average price of $285.60.
Our 20 Exhaust Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2018 Cadillac Escalade without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Cadillac Escalade, we stock popular OEM and aftermarket Exhaust Parts from top names
like Felpro, Dorman, Walker, and more.
Felpro Exhaust Parts
start at just $5.99 and boast an impressive 4.6 stars average rating from customers.
Dorman and Walker also bring quality to the table, with Exhaust Parts available starting at $8.29, and at an average 4.2 stars rating.
With 792 customer reviews and counting, our 2018 Cadillac Escalade Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2018 Cadillac Escalade is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade in top shape, all in one place.
Start shopping confidently below for your 2018 Cadillac Escalade!
Best-Selling Exhaust Gaskets for 2018 Cadillac Escalades
Enhance the driving experience in your Cadillac with 1 quality Exhaust Gasket components, starting at $33.99.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97405)
from
$33.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Most Popular 2018 Cadillac Escalade Exhaust Hangers
Customize your Cadillac with 1 Exhaust Hangers products
like Exhaust System Insulators, all
priced under $8.29.
Walker – Exhaust System Hanger Insulator (Part No.35229)
from
$8.29
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN – Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Top Picks for 2018 Cadillac Escalade Exhaust Fittings
Upgrade Cadillac Escalades with top-quality Exhaust Fittings parts, including 1 OEM and aftermarket selections for your 2018 model.
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS : Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS : Made from quality material for durability and long life
- BETTER TOGETHER : Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
In-Demand Exhaust Pipes for 2018 Cadillac Escalades
Select from 3 premium Exhaust Pipes parts for your 2018 Cadillac Escalade, with prices ranging from $5.99 to $7.99.
Felpro – Exhaust Pipe Flange Gasket (Part No.61089)
from
$5.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61074)
from
$7.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-13681-00)
from
$7.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Most Sold 2018 Cadillac Escalade Exhaust Manifold and Headers
Explore our best-selling Cadillac parts for the 2018 Escalade among 3 OEM and aftermarket options starting from $17.99.
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Direct Fit Exhaust Manifold: without Heat Shield (Part No.674-495)
from
$114.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: without Heat Shield (Part No.674-496)
from
$111.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Top-Rated Exhaust Parts Brands For Your 2018 Cadillac Escalade
Shop for the best-rated brands offering Exhaust Parts and other products for your 2018 Cadillac Escalades. Below you’ll find some of our best rated Exhaust Parts from Felpro, Dorman, and Walker, and more. Exhaust Parts from these brands that fit a 2018 Escalade start at just $5.99 and are rated as high as 4.6 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 2018 Cadillac Escalade Exhaust Parts
When it comes to maintaining or upgrading your 2018 Cadillac Escalade, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Exhaust Parts, specifically designed for the 2018 Cadillac Escalade. With over 2 Felpro brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.99, with an average price of just $6.99. Plus, with over 17 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Dorman 2018 Cadillac Escalade Exhaust Parts
Dorman auto parts is one of the highest quality Exhaust Part brands in the market. Any 2018 Cadillac Escalade owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2018 Escalade, Advance Auto Parts carries a full inventory of 2 Dorman Exhaust Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Dorman Exhaust Parts range from $17.99 to $19.99, plus, with more than 37 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$19.99
(20)
Exhaust Manifold Hardware Kit
“The bolts worked perfectly. They seem to be coated to prevent thread gawling, with heat cycles”
FAQs for 2018 Cadillac Escalade Exhaust Parts
Which Exhaust Parts are best-sellers for 2018 Cadillac Escalades?
Out of 20 Exhaust Parts that fit 2018 Cadillac Escalades, the following parts are the top sellers:
- Exhaust Manifold Hardware Kit (10214558) – $17.99
- Exhaust Manifold Hardware Kit (10840978) – $19.99
- EXHAUST MANIFOLD BOLT SET (12001712) – $27.49
What’s the price range for 2018 Cadillac Escalade Exhaust Parts?
Exhaust Part prices for the 2018 Cadillac Escalade start at $5.99 and go up to $1,642.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2018 Cadillac Escalade?
The average price for Exhaust Parts for the 2018 Cadillac Escalade is $285.60. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Cadillac Escalade model years?
What are the cheapest Exhaust Parts for my 2018 Cadillac Escalade?
The cheapest 2018 Cadillac Escalade Exhaust Parts we carry in stock are:
- Exhaust Pipe Flange Gasket (15780226) – $5.99
- Exhaust Pipe Flange Gasket (15780188) – $7.99
- Exhaust Pipe Flange Gasket (50259540) – $7.99
- Exhaust System Hanger Insulator (18370344) – $8.29
- Exhaust Clamp (10083053) – $10.29
What are the top-rated Exhaust Parts that fit the 2018 Cadillac Escalade?
Out of 792 reviews by customers, our 2018 Cadillac Escalade Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2018 Cadillac Escalade and their top-rated products:
- Exhaust System Kits
- Exhaust Manifold Hardware Kit (10840978) – $19.99
- Exhaust Fittings
- Exhaust Manifold Hardware Kit (10840978) – $19.99
What types of Exhaust Parts do you sell for my 2018 Cadillac Escalade?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 2018 Cadillac Escalade:
Can I get help with 2018 Cadillac Escalade Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Exhaust Parts and more.
What is your return policy for Cadillac Escalade Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Cadillac Escalade Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
