2018 BMW M4 Steering and Chassis Parts

Essential 2018 BMW M4 Steering and Chassis Parts

Lemfoerder – Control Arm Bushing (Part No.L2030526764LEM)

Control Arm Bushing

from

$20.22
The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
See More

Whiteline – Caster Correction Kit (Part No.KCA488)

Caster Correction Kit

from

$113.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
See More

Whiteline – Sway Bar Link (Part No.KLC140-255)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Vaico – Nut (Part No.Y2002336709VCO)

Nut

from

$3.15
Nut

MOOG – Stabilizer Bar Link (Part No.K750872)

Stabilizer Bar Link

from

$38.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Link (Part No.K750873)

Stabilizer Bar Link

from

$38.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

aFe POWER – Sway Bar Set FR/RR (Part No.440-503001-N)

Sway Bar Set FR/RR

from

$681.99
Anyone can make a stiff sway bars, but at aFe Control we provide you the perfect balance by pairing the proper size front and rear sway bars together to offer increased roll stiffness without upsetting the vehicles balance and traction control systems. Designed specifically with lightweight material this sway bar will transform the handling of your car and inspire confidence behind the wheel. Cornering will be flatter and neutral in any corner. Perfectly balanced, the 29mm rear bar are lightweight tubular construction and feature CNC machined, TIG welded bar ends for a perfect fit. The kit includes CNC machined 6061-T6 sway bushing brackets that are anodized black and a direct fit for the included polyurethane bushings. For years of durability and great looks, the rear sway bar is powder-coated a special 2 stage tangerine orange and is a direct fit. Perfectly balanced, aFe Control rear sway bars will have your car handling just as good at the track as it will around town.

Product Features:
  • CNC Bent Lightweight Tubular Alloy Steel Front Sway Bar
  • Polyurethane Bushings and Aluminum Brackets
  • Powder coat Finish
  • Direct Fit Installation
See More

Whiteline – Sway Bar 26Mm Heavy Duty Blade Adjustable (Part No.BBR44Z)

Sway Bar 26Mm Heavy Duty Blade Adjustable

from

$246.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Whiteline – Sway Bar 30Mm Blade Adjustable (Part No.BBF44Z)

Sway Bar 30Mm Blade Adjustable

from

$282.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 30mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

aFe POWER – Front Sway Bar (Part No.440-503001FN)

Front Sway Bar

from

$378.99
Anyone can make a stiff sway bar, at aFe Control we provide you the perfect balance of increased roll stiffness without upsetting the vehicles balance and traction control systems. Designed specifically with lightweight material this sway bar will transform the handling of your car and inspire confidence behind the wheel. Cornering will be flatter and neutral in any corner. Perfectly balanced, the 29mm rear bar are lightweight tubular construction and feature CNC machined, TIG welded bar ends for a perfect fit. The kit includes CNC machined 6061-T6 sway bushing brackets that are anodized black and a direct fit for the included polyurethane bushings. For years of durability and great looks, the rear sway bar is powder-coated a special 2 stage tangerine orange and is a direct fit. Perfectly balanced, aFe Control rear sway bars will have your car handling just as good at the track as it will around town.

Product Features:
  • CNC Bent Lightweight Tubular Alloy Steel Front Sway Bar
  • Polyurethane Bushings and Aluminum Brackets
  • Powder coat Finish
  • Direct Fit Installation
See More

Whiteline – Sway Bar Link (Part No.KLC140-135)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Whiteline – Sway Bar Link (Part No.KLC174)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Rein – Bushing (Part No.AVB0571)

Bushing

from

$15.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • All Rein automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.
See More

MOOG – Tie Rod End (Part No.ES801052)

Tie Rod End

from

$97.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010438337LEM)

ZF/Lemfoerder Tie Rod End

from

$83.29
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

MOOG – Tie Rod End (Part No.ES801051)

Tie Rod End

from

$97.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M3010438335LEM)

ZF/Lemfoerder Tie Rod End

from

$83.43
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

2018 BMW M4 Steering and Chassis Parts

You count on your 2018 BMW M4 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 21 Steering and Chassis Parts ranging in price from $3.15 to $681.99, you’re sure to find everything you need for your 2018 BMW M4.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 6 different brands like Moog, Whiteline, and Lemfoerder. 2018 BMW M4 Steering and Chassis Parts start as low as $3.15!

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2018 BMW M4 below to get started!

FAQs for 2018 BMW M4 Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2018 BMW M4?

Out of 21 Steering and Chassis Parts for the 2018 BMW M4, the most popular in our inventory are:
Tie Rod End
from $97.99
This product is not rated
Tie Rod End
Tie Rod Ends
Tie Rod End
from $97.99
This product is not rated
Tie Rod End
Tie Rod Ends
ZF/Lemfoerder Tie Rod End
from $83.43
This product is not rated
ZF/Lemfoerder Tie Rod End
Tie Rod Ends