2018 Audi S6 Body Parts

Below you will find various in-demand Audi Body Parts, components and accessories for your 2018 S6. Advance Auto Parts has popular S6 parts like Bodies and Fender Parts, Vehicle Latches and Handles, Vehicle Mirrors and more. You’ll also find aftermarket and OEM Body Parts for other S6 model years including 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016, 2017 and more. Select a category of 2018 Audi S6 Body Parts below and start saving instantly.

Popular 2018 Audi S6 Body Parts Categories

Lift Supports

Trunk Actuators

Door Lock Motors

Fender Liner Retainers

Power Window Switches

Exterior Door Handles

Shock Bumpers

Mirrors

Mirror Replacement Glass

Door Interior Trim Panel Retainers

Essential Body Parts for 2018 Audi S6s

from

$272.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$0.76

Screw

from

$2.00

Screw

from

$26.19

Window Switch

from

$118.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$33.93

Window Switch

from

$202.99

Door Window Switch

from

$33.86

Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:

Made from premium quality cellular polyurethane
The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
KYB Bump Stop Kits suit a variety of vehicle applications
KYB Bump Stop Kits perfectly compliment KYB Struts

from

$21.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$9.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
Matches Original Equipment design specifications
Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$18.92

Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style shocks
Are built with design and quality that matches or exceeds OE quality

from

$79.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$177.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Power Door Mirror, With Heated Glass, Without Auto Dimming Glass, Paint To Match. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

With Heated Glass, Without Auto Dimming Glass, Paint To Match, Convex Glass
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$59.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$54.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$2.19

Trim Fastener, Black

from

$97.99

Heated Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken passenger side Mirror glass at a fraction of the dealer cost
Wiring harness must be unplugged from existing backing plate and plugged into the new backing plate before installation
Original equipment quality, fit, and function
Step-by-step instructions for easy installation
Heated

from

$104.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$209.99

Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:

Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles.
Seamless design – precisely cut to match the shape and look of the factory glass
Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
Easy installation – follow simple step-by-step procedure to swap out existing glass

from

$34.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$104.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$29.44

STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:

Restores the original opening and closing speeds of your hood, hatch or trunk
Easy-to-install
No special tools required
Engineered for your application
Easy lifting and reduced closing effort
Consistent lifting force through 50,000 cycles
Rust-resistant piston rod extends product life
Dynamic damping technology, available on select lift supports

from

$20.49

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$10.19

The body of FEQ gas springs are made of high quality seamless tubes, treated with phosphate before painting to increase protection against corrosion, and help the special grade paint adhere to the body of the gas spring strongly. FEQ Struts provide nitrate treated black rods. Chrome rods are not resistant to environmental factors neither environmental friendly as nitrate treated black ones. Plus, visually black color rod compliments the product better than grey chrome color.)

Product Features:

The two point spray gun paint system seals extremities and hard to reach places of the body of the gas spring for better protection against deterioration of the paint and corrosion.
Rods are machined on centerless grinding and polishing machines and also treated with centerless rollers to obtain a smooth surface for the long life cycle that Tuff Support gas springs have.
Rod diameters are checked with lasers for imperfections and diameter fluctuations to meet OEM specs.
Pressurized lift supports go through Phosphate treating process for paint to adhere properly to body of lift support and give long paint life.
Rods are heat treated and nitrated for hardening and resistance to corrosion.
Internal components such as seals, washers and o-rings are procured from suppliers who are TS16949 and ISO9001 certified manufacturers.

from

$39.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required

from

$31.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$26.53

Hood Strut

Upgrade your 2018 Audi S6 with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2018 Audi S6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Body Parts are key to keeping your S6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Body Parts for the 2018 Audi S6, designed to meet your needs without breaking the bank. From Bodies and Fender Part replacements to Vehicle Latches and Handles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2018 Audi S6 at great prices. Our Body Parts inventory for this model ranges from just $0.76 to $296.42, with an average price of $72.32. Our 15 Body Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2018 Audi S6 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Audi S6 is always ready to roll. We’re committed to providing you with everything you need to keep your S6 in top shape, all in one place. Start shopping confidently below for your 2018 Audi S6!

Best-Selling Bodies and Fender Parts for 2018 Audi S6s

Enhance the driving experience in your Audi with 2 quality Bodies and Fender Part components, starting at $0.76.

show more show less

from

$18.92

Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style shocks
Are built with design and quality that matches or exceeds OE quality

from

$0.76

Screw

Most Popular 2018 Audi S6 Vehicle Latches and Handles

Customize your Audi with 1 Vehicle Latches and Handles products like Exterior Door Handles, all priced under $280.90.

show more show less

from

$280.90

Outside Door Handle

Top Picks for 2018 Audi S6 Vehicle Mirrors

Upgrade Audi S6s with top-quality Vehicle Mirrors parts, including 1 OEM and aftermarket selections for your 2018 model.

show more show less

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

In-Demand Vehicle Hoods for 2018 Audi S6s

Select from 4 premium Vehicle Hoods parts for your 2018 Audi S6, with prices ranging from $25.96 to $49.99.

show more show less

from

$49.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required

from

$39.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required

from

$31.99

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$25.96

Restores the original opening and closing speeds of your hood, hatch or trunk
Easy-to-install
No special tools required
Engineered for your application
Easy lifting and reduced closing effort
Consistent lifting force through 50,000 cycles
Rust-resistant piston rod extends product life
Dynamic damping technology, available on select lift supports

Most Sold 2018 Audi S6 Vehicle Doors

Explore our best-selling Audi parts for the 2018 S6 among 2 OEM and aftermarket options starting from $2.19.

show more show less

from

$296.42

Door Latch Assembly

from

$2.19

Trim Fastener, Black

FAQs for 2018 Audi S6 Body Parts

Which Body Parts are best-sellers for 2018 Audi S6s?

Out of 15 Body Parts that fit 2018 Audi S6s, the following parts are the top sellers:

Side View Replacement Mirror (12455019) – $39.99
Door Latch Assembly (12608414) – $296.42
Window Switch (10799115) – $26.37

What’s the price range for 2018 Audi S6 Body Parts?

Body Part prices for the 2018 Audi S6 start at $0.76 and go up to $296.42 for the most premium parts.

What’s the average price of a Body Part for a 2018 Audi S6?

The average price for Body Parts for the 2018 Audi S6 is $72.32. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Audi S6 model years?

Yes, we currently carry Body Parts for 16 model years of Audi S6s between 1995 and 2022. Body Parts are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 2011, 2010, 2009, and 2008.

What are the cheapest Body Parts for my 2018 Audi S6?

The cheapest 2018 Audi S6 Body Parts we carry in stock are:

Screw (11916336) – $0.76
Trim Fastener, Black (11027996) – $2.19
Shock Bump Stop (12050894) – $18.92
Gas Charged Hood Strut (11488934) – $25.96
Window Switch (11939584) – $26.19

What types of Body Parts do you sell for my 2018 Audi S6?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2018 Audi S6:

Can I get help with 2018 Audi S6 Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Body Parts and more.

What is your return policy for Audi S6 Body Parts?

Advance Auto Parts keeps returns simple. For new Audi S6 Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Audi S6 Body Parts

Dorman – Integrated Door Lock Actuator (Part No.931-111)

Vaico – Screw (Part No.Y2003462065VCO)

Vaico – Screw (Part No.Y2003462058VCO)

Original Equipment – Window Switch (Part No.O3060341190OEA)

Carquest Premium – Door Window Switch (Part No.WSA2202)

Vemo – Window Switch (Part No.O306055308VMO)

Carquest Premium – Door Window Switch (Part No.WSA3402)

KYB – Shock Bellows Bump Stop Kit (Part No.L4030108063KYB)

Rein – Suspension Bump Stop (Part No.AVZ0167)

Rein – Suspension Bump Stop (Part No.AVZ0166)

Febi – Shock Bump Stop (Part No.L40411517478FEB)

Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.4055HRSG)

KAI – Mirror Assembly: Passenger Side, Power Adjustment, Heated, 1 Pk (Part No.AU1321110)

Burco – Side View Replacement Mirror (Part No.5202)

Burco – Side View Replacement Mirror (Part No.5151)

Vaico – Trim Fastener, Black (Part No.O6072462069VCO)

K-Source – Passenger Car Replacement Mirror: Passenger Side, Convex, Includes Backing Plate (Part No.30279)

Burco – Door Mirror Replacement Glass (Part No.7113HRSG)

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56827)

Burco – Side View Replacement Mirror (Part No.4250)

Burco – Side View Replacement Mirror (Part No.5508)

Burco – Heated Side View Mirror Replacement with Backing Plate (Part No.4284HRSG)

Stabilus – Gas Charged Trunk Strut (Part No.O2064137516STB)

StrongArm – Hood Lift Support: 28.43" Ext Length, 11.6" Travel, 70 Lbs of Force, 1 Pk (Part No.B4989)

First Equipment Quality – FEQ Trunk Strut (Part No.O206451120FEQ)

StrongArm – Trunk Lift Support: 17.126" Ext Length, 7.126" Travel, 0 Lbs of Force, 1 Pk (Part No.D7059)

Atlas Lift – Lift Support (Part No.LS11851)

Autopart International Inc – Hood Strut (Part No.O20202208126API)

Febi – Shock Bump Stop (Part No.L40411517478FEB)

Vaico – Screw (Part No.Y2003462065VCO)

Vemo – Outside Door Handle (Part No.O30181451885VMO)

Burco – Side View Replacement Mirror (Part No.5508)

StrongArm – Hood Lift Support: 12.93" Ext Length, 4.50" Travel, 90 Lbs of Force, 1 Pk (Part No.E7159)

StrongArm – Trunk Lift Support: 17.126" Ext Length, 7.126" Travel, 0 Lbs of Force, 1 Pk (Part No.D7059)

Atlas Lift – Lift Support (Part No.LS11851)

Stabilus – Gas Charged Hood Strut (Part No.O2020456408STB)

APA/URO Parts – Door Latch Assembly (Part No.O3027667083APA)

Vaico – Trim Fastener, Black (Part No.O6072462069VCO)