2018 Audi Q3 Suspension Parts

Name: OESpectrum Passenger Car Shock Absorber
Brand: Monroe
SKU: 5518
Price: 94.99 USD

Below you will find various in-demand Audi Suspension Parts, components and accessories for your 2018 Q3. Advance Auto Parts has popular Q3 parts like Shocks and Struts, Air Suspension and Kits, Control Arms and more. You’ll also find aftermarket and OEM Suspension Parts for other Q3 model years including 2015, 2016, 2017, 2019, 2020, 2021, 2022, 2023, 2024 and more. Select a category of 2018 Audi Q3 Suspension Parts below and start saving instantly.

Popular 2018 Audi Q3 Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Rear Shock and Struts

Front Shock and Struts

Control Arm Support Brackets

Suspension Strut Bumper and Bellows Kits

Front Coil Springs

Suspension Air Compressor Relays

Suspension Complete Bushing Kits

Lower Control Arm Bushings

Strut Mounts

Lateral Arms

Trailing Arm Bushings

Suspension Knuckle Bushings

Suspension Strut Nuts

Essential Suspension Parts for 2018 Audi Q3s

from

$94.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Premium – Limited Lifetime Warranty
For Commercial Usage Refer to Product Warranty

from

$28.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$60.13

The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$24.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$71.75

Tie rods from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rods.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties

from

$141.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$52.19

Control Arm Mntg Bra

from

$78.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$488.99

By matching key bushing, alignment and geometry products into one solution, Whiteline Essential Kits provide bang for your buck handling upgrades that simply Activate More Grip. Essentials include the famous front anti lift/ caster kit, steering precision rack and control arm bushings that deliver go kart like steering and next level grip to your vehicle.

Product Features:

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$3.38

Relay

from

$74.99

Over compliant front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Whiteline’s kit is specially designed to improve deflection rates for improved response and chassis control.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$50.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Control Arm Bushing Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to AUDI 04-18; VW 06-17;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2004-2018
Weight approx: 2 Lbs
CONTROL ARM: REAR BUSHING
PART GROUP: 9401, 9401

from

$72.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$46.45

The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$80.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$12.49

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

from

$1.29

Sway Bar Link Nut

from

$14.99

Modern transmissions are better than ever, with more gears to help improve fuel efficiency and acceleration. Greater performance calls for greater protection. Valvoline Extended Protection Full Synthetic ATF features our exclusive Dual Defense Additive Technology for two layers of protection against metal-on-metal contact and thermal breakdown, all while minimizing wear on clutch components. In fact, Valvoline Extended Protection Full Synthetic ATF is 45% stronger against breakdown compared to major brand DEX/MERC oxidative PDSC performance. Proven to maximize transmission life, our patented formula is suitable for use in 92% of vehicles in light duty automatic transmissions 2010 and newer. Keep your modern vehicle shifting smoothly, mile after mile, with the ultimate protection you can only expect from Valvoline, the #1 ATF brand.

Product Features:

The ultimate protection for your automatic transmission
45% stronger against breakdown
Dual Defense Additive Technology combines friction modifiers and anti-wear additives for two layers of protection
Suitable for use in over 92% of vehicles in light duty automatic transmissions 2010 and newer

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$71.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

Upgrade your 2018 Audi Q3 with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2018 Audi Q3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Suspension Parts are key to keeping your Q3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Suspension Parts for the 2018 Audi Q3, designed to meet your needs without breaking the bank. From Shocks and Strut replacements to Air Suspension and Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2018 Audi Q3 at great prices. Our Suspension Parts inventory for this model ranges from just $1.29 to $775.99, with an average price of $96.65. Our 57 Suspension Parts in stock come from 17 trusted brands, so you’re sure to find the right part for your 2018 Audi Q3 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Audi Q3, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline Monroe, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. With 908 customer reviews and counting, our 2018 Audi Q3 Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Audi Q3 is always ready to roll. We’re committed to providing you with everything you need to keep your Q3 in top shape, all in one place. Start shopping confidently below for your 2018 Audi Q3!

Best-Selling Shocks and Struts for 2018 Audi Q3s

Enhance the driving experience in your Audi with 9 quality Shocks and Strut components, starting at $1.29.

show more show less

from

$72.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$141.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$94.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Premium – Limited Lifetime Warranty
For Commercial Usage Refer to Product Warranty

from

$46.45

The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$135.99

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

KYB Recommended Orem Replacement Strut
The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Volkswagen Tiguan
The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5567

from

$119.74

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:

Strut Mount
Bearing
Upper Spring Isolator
Lower Spring Isolator
Upper Spring Seat

from

$77.57

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$41.03

Shock Mount

from

$1.29

Sway Bar Link Nut

Most Popular 2018 Audi Q3 Air Suspension and Kits

Customize your Audi with 4 Air Suspension and Kits products like Suspension Self-Leveling Unit Fluids, Suspension Strut Bumper and Bellows Kits, and Suspension Complete Bushing Kits, all priced under $488.99.

show more show less

from

$36.49

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$28.99

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$488.99

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$3.38

Relay

Top Picks for 2018 Audi Q3 Control Arms

Upgrade Audi Q3s with top-quality Control Arms parts, including 31 OEM and aftermarket selections for your 2018 model.

show more show less

from

$12.94

The Febi Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$146.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$20.29

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$50.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2004-2018
Weight approx: 2 Lbs
CONTROL ARM: REAR BUSHING
PART GROUP: 9401, 9401

from

$59.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE — Engineered to match or exceed OE requirements
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose

from

$18.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$99.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$99.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$71.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$775.99

These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with +0.5deg caster and anti-lift improvements into these arms to optimise wheel alignments settings for street and track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. The change in lift and dive geometry enables the suspension to work more freely. Whiteline’s rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high light alloy housing boasting anti geometry characteristics permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic im(more…)

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$320.99

Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Product Features:

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$109.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Precise tolerances
Corrosion resistant

from

$103.57

The Febi control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$92.99

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$85.99

Rigorously tested for sustained, secure performance by a team of product and quality engineers, our Lateral Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Direct replacement for a trouble-free installation
Bushings included for a complete installation, saving time and labor (where applicable)
Corrosion-resistant for long-lasting performance
A rigorous quality inspection has been undertaken to ensure that this part conforms to standards

from

$82.73

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm & Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$75.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$74.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$71.75

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties

from

$69.63

The Febi control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$67.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$60.13

The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$52.19

Control Arm Mntg Bra

from

$31.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$31.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$28.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$21.59

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance
Extensive on-road testing at TRW tracks around the world

from

$19.49

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$15.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$14.32

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

In-Demand Suspension Hardware for 2018 Audi Q3s

Select from 1 premium Suspension Hardware parts for your 2018 Audi Q3.

show more show less

from

$24.99

This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Sold 2018 Audi Q3 Coil and Leaf Springs

Explore our best-selling Audi parts for the 2018 Q3 among 1 OEM and aftermarket options starting from $190.00.

show more show less

from

$190.00

COIL SPRING

Top-Rated Suspension Parts Brands For Your 2018 Audi Q3

Shop for the best-rated brands offering Suspension Parts and other products for your 2018 Audi Q3s. Below you’ll find some of our best rated Suspension Parts from Valvoline and Monroe, and more. Suspension Parts from these brands that fit a 2018 Q3 start at just $28.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2018 Audi Q3 Suspension Parts

When it comes to maintaining or upgrading your 2018 Audi Q3, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2018 Audi Q3. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Monroe 2018 Audi Q3 Suspension Parts

Monroe auto parts is one of the highest quality Suspension Part brands in the market. Any 2018 Audi Q3 owner should feel confident when installing genuine Monroe parts in their vehicle. To ensure the best fit and performance for your 2018 Q3, Advance Auto Parts carries a full inventory of 5 Monroe Suspension Parts. Plus you will be keeping your Audi in peak condition while saving money because prices on these Monroe Suspension Parts range from $28.99 to $141.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$94.99

This product is not rated

OESpectrum Passenger Car Shock Absorber

“”

from
$141.99

This product is not rated

OESpectrum Strut

“”

from
$72.99

This product is not rated

Strut-Mate Strut Mounting Kit

“”

FAQs for 2018 Audi Q3 Suspension Parts

Which Suspension Parts are best-sellers for 2018 Audi Q3s?

Out of 57 Suspension Parts that fit 2018 Audi Q3s, the following parts are the top sellers:

Strut-Mate Strut Mounting Kit (10188084) – $72.99
Suspension Control Arm (10719745) – $146.99
OESpectrum Strut (10052144) – $141.99

What’s the price range for 2018 Audi Q3 Suspension Parts?

Suspension Part prices for the 2018 Audi Q3 start at $1.29 and go up to $775.99 for the most premium parts.

What’s the average price of a Suspension Part for a 2018 Audi Q3?

The average price for Suspension Parts for the 2018 Audi Q3 is $96.65. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Audi Q3 model years?

Yes, we currently carry Suspension Parts for 9 model years of Audi Q3s between 2015 and 2024. Suspension Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2017, 2016, 2015, and 2024.

What are the cheapest Suspension Parts for my 2018 Audi Q3?

The cheapest 2018 Audi Q3 Suspension Parts we carry in stock are:

Sway Bar Link Nut (11583231) – $1.29
Relay (10952553) – $3.38
Bushing (11323115) – $12.49
Trailing Arm Bushing (10782369) – $12.94
Control Arm Bushing (11484616) – $14.32

What are the top-rated Suspension Parts that fit the 2018 Audi Q3?

Out of 908 reviews by customers, our 2018 Audi Q3 Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2018 Audi Q3 and their top-rated products:

Control Arms
- Trailing Arm Bushing (10782369) – $12.94

What types of Suspension Parts do you sell for my 2018 Audi Q3?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2018 Audi Q3:

Can I get help with 2018 Audi Q3 Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Suspension Parts and more.

What is your return policy for Audi Q3 Suspension Parts?

Advance Auto Parts keeps returns simple. For new Audi Q3 Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Audi Q3 Suspension Parts

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5518)

Monroe – Strut-Mate Strut Boot Kit (Part No.63640)

Lemfoerder – OE Replacement Control Arm (Part No.L2000664537LEM)

Dorman – Suspension Knuckle Bushing (Part No.905-537)

Lemfoerder – Tie Rod (Part No.L2000384942LEM)

Monroe – OESpectrum Strut (Part No.72312)

Corteco – Control Arm Mntg Bra (Part No.L2059461531CFW)

MOOG – Control Arm (Part No.RK643261)

Whiteline – Essential Vehicle Kit (Part No.WEK004)

Meyle – Relay (Part No.P2020422128MEY)

Whiteline – Control Arm Lower Inner Front Bushing (Part No.W0503)

Anchor – Control Arm Bushing Motor Mount: Left, Right, 1 Piece (Part No.9401)

Monroe – Strut-Mate Strut Mounting Kit (Part No.907949)

Lemfoerder – Strut Mount (Part No.L3030530623LEM)

Whiteline – Trailing Arm Front Bushing (Part No.W0504)

Rein – Bushing (Part No.AVB0358R)

Febi – Sway Bar Link Nut (Part No.L1038567781FEB)

Valvoline – Extended Protection Automatic Transmission Fluid, 1 Quart (Part No.899179)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

MOOG – Control Arm (Part No.RK640386)

Monroe – Strut-Mate Strut Mounting Kit (Part No.907949)

Monroe – OESpectrum Strut (Part No.72312)

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5518)

Lemfoerder – Strut Mount (Part No.L3030530623LEM)

KYB – Gas Strut (Part No.335814)

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033668797MNR)

KYB – Strut Mount (Part No.L3030440641KYB)

Autopart International Inc – Shock Mount (Part No.L40102394439API)

Febi – Sway Bar Link Nut (Part No.L1038567781FEB)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Monroe – Strut-Mate Strut Boot Kit (Part No.63640)

Whiteline – Essential Vehicle Kit (Part No.WEK004)

Meyle – Relay (Part No.P2020422128MEY)

Febi – Trailing Arm Bushing (Part No.L2006230113FEB)

Dorman – Suspension Control Arm (Part No.522-731)

MOOG – Control Arm Bushing (Part No.K200094)

Anchor – Control Arm Bushing Motor Mount: Left, Right, 1 Piece (Part No.9401)

MOOG – Control Arm (Part No.RK643328)

MOOG – Control Arm Bushing (Part No.K201860)

Dorman – Suspension Control Arm (Part No.521-548)

Dorman – Suspension Control Arm (Part No.521-547)

MOOG – Control Arm (Part No.RK640386)

Whiteline – Control Arm Lower Arm (Part No.KTA253)

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA316)

MOOG – Control Arm (Part No.RK642309)

Rare Parts – Lateral Link (Part No.RP12169)

Febi – Control Arm (Part No.L2000383591FEB)

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.W53196)

Dorman – Lateral Control Arm (Part No.L2002720689DOR)

Dorman – Control Arm (Part No.L2000720690DOR)

MOOG – Control Arm (Part No.RK642013)

Whiteline – Control Arm Lower Inner Front Bushing (Part No.W0503)

Lemfoerder – Tie Rod (Part No.L2000384942LEM)

Febi – Control Arm (Part No.L2000434432FEB)

Dorman – Suspension Control Arm (Part No.526-592)

Lemfoerder – OE Replacement Control Arm (Part No.L2000664537LEM)

Corteco – Control Arm Mntg Bra (Part No.L2059461531CFW)

Whiteline – Control Arm Lower Rear Outer Bushing (Part No.W63554)

Whiteline – Control Arm Lower Front Outer Bushing (Part No.W63552)

Whiteline – Control Arm Upper Inner Bushing (Part No.W63549)

TRW – Control Arm Bushing (Part No.L2030183533TRW)

Rare Parts – Control Arm Bush (Part No.RP16003)

Dorman – Suspension Control Arm Bushing (Part No.533-691)

Lemfoerder – Control Arm Bushing (Part No.L2030183533LEM)

Dorman – Suspension Knuckle Bushing (Part No.905-537)

Worldpac – COIL SPRING (Part No.L50001514486LES)