2018 Audi A6 Quattro Body Parts

Essential Body Parts for 2018 Audi A6 Quattros

Dorman – Help – Plastic Backed Door Mirror Glass (Part No.56827)

Plastic Backed Door Mirror Glass

from

$209.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:
  • Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles.
  • Seamless design – precisely cut to match the shape and look of the factory glass
  • Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
  • Easy installation – follow simple step-by-step procedure to swap out existing glass
See More

Burco – Side View Replacement Mirror (Part No.7113)

Side View Replacement Mirror

from

$64.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Side View Replacement Mirror (Part No.4250)

Side View Replacement Mirror

from

$34.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Vaico – Trim Fastener, Black (Part No.O6072462069VCO)

Trim Fastener, Black

from

$2.19
Trim Fastener, Black

Dorman – Integrated Door Lock Actuator (Part No.931-111)

Integrated Door Lock Actuator

from

$272.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Rein – Suspension Bump Stop (Part No.AVZ0300P)

Suspension Bump Stop

from

$13.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
See More

APA/URO Parts – APA/URO Shock Bump Stop (Part No.L4041230538APA)

APA/URO Shock Bump Stop

from

$17.35
APA/URO’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:
  • Made from premium quality cellular polyurethane
  • Perfectly compliment OE style shocks
  • Are built with design and quality that matches or exceeds OE quality
See More

Rein – Suspension Bump Stop (Part No.AVZ0166)

Suspension Bump Stop

from

$9.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

Vaico – Q+ OE Quality Shock Bump Stop (Part No.L4041230256VCO)

Q+ OE Quality Shock Bump Stop

from

$22.47
Vaico’s superior OE Quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:
  • Made from premium quality cellular polyurethane
  • Perfectly compliment OE style shocks
  • Are built with design and quality that matches or exceeds OE quality Q+ The Seal of Excellence
  • ALWAYS OEM QUALITY
  • ALWAYS MADE IN GERMANY
See More

Burco – Heated Side View Mirror Replacement (Part No.5135H)

Heated Side View Mirror Replacement

from

$69.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Side View Replacement Mirror (Part No.6113)

Side View Replacement Mirror

from

$59.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Side View Replacement Mirror (Part No.5202)

Side View Replacement Mirror

from

$59.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Burco – Door Mirror Replacement Glass (Part No.6141HRSG)

Door Mirror Replacement Glass

from

$104.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Vaico – Screw (Part No.Y2003462058VCO)

Screw

from

$2.00
Screw

Vaico – Screw (Part No.Y2003462065VCO)

Screw

from

$0.76
Screw

Febi – Splash Shield Hardwa (Part No.Q1020946849FEB)

Splash Shield Hardwa

from

$2.71
Splash Shield Hardwa

International Suspension Group – International Suspension Group Trunk Strut (Part No.O206451120ISG)

International Suspension Group Trunk Strut

from

$26.12
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:
  • Exact replacement, engineered for your application.
  • Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort.
  • Consistent lifting force through 50,000 cycles.
See More

Atlas Lift – Lift Support (Part No.LS11851)

Lift Support

from

$31.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Atlas Lift – Lift Support (Part No.LS11834)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

StrongArm – Trunk Lift Support: 11.02" Ext Length, 3.25" Travel, 142 Lbs of Force, 1 Pk (Part No.E6622)

Trunk Lift Support: 11.02" Ext Length, 3.25" Travel, 142 Lbs of Force, 1 Pk

from

$50.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

International Suspension Group – International Suspension Group Hood Strut (Part No.O2020127693ISG)

International Suspension Group Hood Strut

from

$27.20
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:
  • Exact replacement, engineered for your application.
  • Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort.
  • Consistent lifting force through 50,000 cycles.
See More

Atlas Lift – Lift Support (Part No.LS11195)

Lift Support

from

$31.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

First Equipment Quality – FEQ Trunk Strut (Part No.O206451120FEQ)

FEQ Trunk Strut

from

$10.19
The body of FEQ gas springs are made of high quality seamless tubes, treated with phosphate before painting to increase protection against corrosion, and help the special grade paint adhere to the body of the gas spring strongly. FEQ Struts provide nitrate treated black rods. Chrome rods are not resistant to environmental factors neither environmental friendly as nitrate treated black ones. Plus, visually black color rod compliments the product better than grey chrome color.)

Product Features:
  • The two point spray gun paint system seals extremities and hard to reach places of the body of the gas spring for better protection against deterioration of the paint and corrosion.
  • Rods are machined on centerless grinding and polishing machines and also treated with centerless rollers to obtain a smooth surface for the long life cycle that Tuff Support gas springs have.
  • Rod diameters are checked with lasers for imperfections and diameter fluctuations to meet OEM specs.
  • Pressurized lift supports go through Phosphate treating process for paint to adhere properly to body of lift support and give long paint life.
  • Rods are heat treated and nitrated for hardening and resistance to corrosion.
  • Internal components such as seals, washers and o-rings are procured from suppliers who are TS16949 and ISO9001 certified manufacturers.
See More

Stabilus – Gas Charged Hood Strut (Part No.O2020456408STB)

Gas Charged Hood Strut

from

$25.96
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

StrongArm – Hood Lift Support: 28.43" Ext Length, 11.75" Travel, 45 Lbs of Force, 1 Pk (Part No.B6569)

Hood Lift Support: 28.43" Ext Length, 11.75" Travel, 45 Lbs of Force, 1 Pk

from

$61.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

International Suspension Group – International Suspension Group Hood Strut (Part No.O2020127695ISG)

International Suspension Group Hood Strut

from

$33.13
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:
  • Exact replacement, engineered for your application.
  • Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort.
  • Consistent lifting force through 50,000 cycles.
See More

International Suspension Group – Trunk Strut (Part No.O2064543500ISG)

Trunk Strut

from

$16.65
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:
  • Exact replacement, engineered for your application.
  • Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort.
  • Consistent lifting force through 50,000 cycles.
See More

International Suspension Group – International Suspension Group Hatch Strut (Part No.O2070181545ISG)

International Suspension Group Hatch Strut

from

$27.23
ISG gas charged lift supports are manufactured to automotive O.E. performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.

Product Features:
  • Exact replacement, engineered for your application.
  • Rust-resistant piston rod extends product life.
  • Easy lifting, reduced closing effort.
  • Consistent lifting force through 50,000 cycles.
See More

Upgrade your 2018 Audi A6 Quattro with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2018 Audi A6 Quattro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Body Parts are key to keeping your A6 Quattro functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Body Parts for the 2018 Audi A6 Quattro, designed to meet your needs without breaking the bank. From Vehicle Mirror replacements to Vehicle Latches and Handles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2018 Audi A6 Quattro at great prices. Our Body Parts inventory for this model ranges from just $0.76 to $296.42, with an average price of $72.05. Our 13 Body Parts in stock come from 10 trusted brands, so you’re sure to find the right part for your 2018 Audi A6 Quattro without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Audi A6 Quattro is always ready to roll. We’re committed to providing you with everything you need to keep your A6 Quattro in top shape, all in one place. Start shopping confidently below for your 2018 Audi A6 Quattro!

Best-Selling Vehicle Mirrors for 2018 Audi A6 Quattros

Enhance the driving experience in your Audi with 1 quality Vehicle Mirror components, starting at $39.99.

Burco – Side View Replacement Mirror (Part No.5508)

Side View Replacement Mirror

from

$39.99
Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:
  • Made in USA
  • Exact Fit
  • Safety Smooth Edges
  • Replaces OE Mirror
  • Premium Mirror Glass
  • Break-Free Guarantee
  • Instructions Included
See More

Most Popular 2018 Audi A6 Quattro Vehicle Latches and Handles

Customize your Audi with 1 Vehicle Latches and Handles products like Exterior Door Handles, all priced under $280.90.

Vemo – Outside Door Handle (Part No.O30181451885VMO)

Outside Door Handle

from

$280.90
Outside Door Handle

Top Picks for 2018 Audi A6 Quattro Bodies and Fender Parts

Upgrade Audi A6 Quattros with top-quality Bodies and Fender Parts parts, including 3 OEM and aftermarket selections for your 2018 model.

Febi – Shock Bump Stop (Part No.L40411517478FEB)

Shock Bump Stop

from

$18.92
Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:
  • Made from premium quality cellular polyurethane
  • Perfectly compliment OE style shocks
  • Are built with design and quality that matches or exceeds OE quality
See More

Rein – Suspension Bump Stop (Part No.AVZ0455)

Suspension Bump Stop

from

$14.49
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Rubber bump stops match the shore hardness of the original equipment bump stop to ensure maximum performance and product longevity
  • Matches Original Equipment design specifications
  • Recommend to replace bump stops in pairs to ensure best performance. Note: Bump Stop Sets contain the needed pair
See More

Vaico – Screw (Part No.Y2003462065VCO)

Screw

from

$0.76
Screw

In-Demand Vehicle Hoods for 2018 Audi A6 Quattros

Select from 4 premium Vehicle Hoods parts for your 2018 Audi A6 Quattro, with prices ranging from $25.96 to $49.99.

StrongArm – Hood Lift Support: 12.93" Ext Length, 4.50" Travel, 90 Lbs of Force, 1 Pk (Part No.E7159)

Hood Lift Support: 12.93" Ext Length, 4.50" Travel, 90 Lbs of Force, 1 Pk

from

$49.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
See More

StrongArm – Trunk Lift Support: 17.126" Ext Length, 7.126" Travel, 0 Lbs of Force, 1 Pk (Part No.D7059)

Trunk Lift Support: 17.126" Ext Length, 7.126" Travel, 0 Lbs of Force, 1 Pk

from

$39.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
See More

Atlas Lift – Lift Support (Part No.LS11851)

Lift Support

from

$31.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Stabilus – Gas Charged Hood Strut (Part No.O2020456408STB)

Gas Charged Hood Strut

from

$25.96
STABILUS gas-charged lift supports make it easy and safe to raise and lower heavy hoods, rear hatches and tailgates by hand. Compact design, high functional comfort and integrated operating safety expand the range of applications for STABILUS products in utility vehicle design. As the world’s leading manufacturer of lift supports, STABILUS can provide exact replacements for practically any application where a lift support is used.

Product Features:
  • Restores the original opening and closing speeds of your hood, hatch or trunk
  • Easy-to-install
  • No special tools required
  • Engineered for your application
  • Easy lifting and reduced closing effort
  • Consistent lifting force through 50,000 cycles
  • Rust-resistant piston rod extends product life
  • Dynamic damping technology, available on select lift supports
See More

Most Sold 2018 Audi A6 Quattro Vehicle Doors

Explore our best-selling Audi parts for the 2018 A6 Quattro among 2 OEM and aftermarket options starting from $2.19.

APA/URO Parts – Door Latch Assembly (Part No.O3027667083APA)

Door Latch Assembly

from

$296.42
Door Latch Assembly

Vaico – Trim Fastener, Black (Part No.O6072462069VCO)

Trim Fastener, Black

from

$2.19
Trim Fastener, Black

FAQs for 2018 Audi A6 Quattro Body Parts

Which Body Parts are best-sellers for 2018 Audi A6 Quattros?

Out of 13 Body Parts that fit 2018 Audi A6 Quattros, the following parts are the top sellers:

What’s the price range for 2018 Audi A6 Quattro Body Parts?

Body Part prices for the 2018 Audi A6 Quattro start at $0.76 and go up to $296.42 for the most premium parts.

What’s the average price of a Body Part for a 2018 Audi A6 Quattro?

The average price for Body Parts for the 2018 Audi A6 Quattro is $72.05. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Audi A6 Quattro model years?

Yes, we currently carry Body Parts for 27 model years of Audi A6 Quattros between 1995 and 2022. Body Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2017, 2016, 2015, 2014, and 2013.

What are the cheapest Body Parts for my 2018 Audi A6 Quattro?

The cheapest 2018 Audi A6 Quattro Body Parts we carry in stock are:

What types of Body Parts do you sell for my 2018 Audi A6 Quattro?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2018 Audi A6 Quattro:

Can I get help with 2018 Audi A6 Quattro Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Body Parts and more.

What is your return policy for Audi A6 Quattro Body Parts?

Advance Auto Parts keeps returns simple. For new Audi A6 Quattro Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.