2018 Audi A4 Wheels and Tires

Below you will find various in-demand Audi Wheels and Tires, components and accessories for your 2018 A4. Advance Auto Parts has popular A4 parts like Wheel Bearings, Wheel Spacers, Wheel Hardwares and more. You’ll also find aftermarket and OEM Wheels and Tires for other A4 model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2019, 2020 and more. Select a category of 2018 Audi A4 Wheels and Tires below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2018 Audi A4 Wheels and Tires Categories

Tire Pressure Sensors

Remote Tire Pressure Sensors

Rear Wheel Bearings

Wheels

Locking Wheel Lug Nuts

Tire Pressure Sensor Valves

Wheel Bolts

Essential Wheels and Tires for 2018 Audi A4s

from

$449.99

Product Features:

17 X 7.5, 38mm Offset, 5 Split Spoke, 5 Lug 112mm Bolt Pattern, All Painted Light Silver Metallic, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Lug Nuts And Center Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$373.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 18 X 8, 47MM Offset, 10 Spoke, 5 Lug, 112MM Bolt Pattern, Bright Hypersilver. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle. Warranty: 5 Year, Limited.

Product Features:

18 X 8, 47MM Offset, 10 Spoke, 5 Lug, 112MM Bolt Pattern, Bright Hypersilver, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Lug Nuts And Center Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$319.99

Product Features:

18 X 8, 40mm Offset, 10 Spoke, 5 Stud/Lug, 112mm Bolt Pattern, Machined And Bright Silver, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Lug Nuts And Center Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$319.99

As the Leading Value-Added Global Distributor of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles While Offering Our Customers the Most Comprehensive and Cost Effective Part Solutions, KAI is Supplying a Reconditioned OEM Aluminum Alloy Wheel, 18 X 8, 47MM Offset, 10 Double Spokes, 5 Lug, 112MM Bolt Pattern, All Painted Medium Silver Metallic. It is Designed to Replace Your Existing Factory Wheel. Check to Be Sure it Fits Your Vehicle. Warranty: 5 Year, Limited.

Product Features:

18 X 8, 47MM Offset, 10 Double Spokes, 5 Lug, 112MM Bolt Pattern, All Painted Medium Silver Metallic, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Lug Nuts And Center Cap Not Included
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$173.99

Huf Baolong Electronics (BH Sens) provides the market with OE Replacement sensors that are exactly like the OE sensor provided to the manufacturer and being replaced. The replacement tire sensors can be installed directly without programming, just relearn the sensors to the vehicle with a TPMS tool after install.

Product Features:

Ready out of the box – no programming required
Equivalent in function and quality of the OE Sensor
Quick and easy installation. Only need to relearn to vehicle upon installation.
Full WAL technology support for auto-locate.
Metal valve included.
Flexible valve angle 0 to 36 degrees.
For specific models from Aston Martin, Audi, Bentley, BMW, Ferrari, Lamborghini, Maserati, McLaren, Mini, Porsche, Rolls Royce, Tesla

from

$5.49

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

Black Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$4.99

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

Titan Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$42.99

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
Always up-to-date with the new programming function via the TPMS diagnostic tool
Reprogrammable and Copy Clone Capable
Full WAL and PAL technology support for auto-locate.
Rubber valve included.

from

$118.99

Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.

Product Features:

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$124.99

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$75.99

As we ensure that every repair can be carried out in the simplest possible manner, FAG packaging includes all the accessory parts required to perform professional repair work, alongside the wheel bearing itself. These additional parts make all the difference. The nuts and bolts are equipped with various locking systems and are perfectly tuned to the corresponding wheel bearing and vehicle. An ideal repair solution is only as effective as its individual parts, which is why these parts must be of the highest quality and be provided together with the relevant services.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$99.99

Carquest Standard hub bearing assembly is designed to meet or exceed original equipment (OE) standards in form, fit and function. The hub bearing assembly is designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Carquest’s hub bearing assembly. The hub bearing comes complete with wheel studs, hub and bearings. Also, includes ABS Wheel Sensors where applicable.

Product Features:

Constructed from high-quality materials for extended durability
Integral raceway provides proper clearance between the ball and bearing riding surfaces
Ensures proper function and quiet operation
Precision-matched components deliver smooth and quiet operation
Manufactured to strict engineering quality standards
Brand may vary by location

from

$61.99

Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.

Product Features:

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a ball-shaped seat.

from

$87.99

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a ball-shaped seat.

from

$8.99

Product Features:

Chrome Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor
Warranty on Material and Workmanship

from

$29.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$63.99

Huf Baolong Electronics (BH Sens) provides the market with OE Equivalent replacement sensors that function exactly like the OE sensor being replaced. The replacement tire sensors can be installed directly without programming, just relearn the sensors to the vehicle with a TPMS tool after install.

Product Features:

Ready out of the box – no programming required
Equivalent in function and quality of the OE Sensor
Quick and easy installation. Only need to relearn to vehicle upon installation.
Full WAL and PAL technology support for auto-locate.
Metal valve included.
Flexible valve angle 0 to 36 degrees.
For specific models from Audi, Volkswagen

from

$7323.00

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$3.49

This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.

Product Features:

Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
Durable construction – made of quality materials for safe, reliable service
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$4.99

Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.

Product Features:

Wheel bolt is produced by an OE manufacturer
Packaged in convenient quantities.
Direct replacement for correct fitments
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$4.29

Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
Durable construction – made of quality materials for safe, reliable service
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$5.99

Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
Durable construction – made of quality materials for safe, reliable service
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$8.49

All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.

Product Features:

OE – validated part identical to the dealer
Electroless nickel-plated valve cores
Advanced anodization of valve stems and hex nuts
Includes torque specifications and installation instructions
TPMS service kits are required whenever performing tire replacement or service
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

Upgrade your 2018 Audi A4 with Top-Quality Wheels and Tires

When it comes to maintaining or upgrading your 2018 Audi A4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Wheels and Tires are key to keeping your A4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 29 Wheels and Tires for the 2018 Audi A4, designed to meet your needs without breaking the bank. From Wheel Bearing replacements to Wheel Spacers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Wheels and Tires for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Wheels and Tires for your 2018 Audi A4 at great prices. Our Wheels and Tires inventory for this model ranges from just $4.29 to $7,323.00, with an average price of $575.98. Our 29 Wheels and Tires in stock come from 8 trusted brands, so you’re sure to find the right part for your 2018 Audi A4 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Wheels and Tire upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2018 Audi A4 is always ready to roll. We’re committed to providing you with everything you need to keep your A4 in top shape, all in one place. Start shopping confidently below for your 2018 Audi A4!

Best-Selling Wheel Bearings for 2018 Audi A4s

Enhance the driving experience in your Audi with 4 quality Wheel Bearing components, starting at $99.99.

show more show less

from

$343.99

Product Features:

Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
Engineered to overcome problems and deliver smooth, reliable performance.
MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
Application specific design
Application specific design

from

$124.99

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$118.99

Engineered for OE fit, form and function
Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
High-quality steel and surface treatments for proper fit and endurance
Roll-form bearing design applies exact preload for increased durability (where applicable)
Bearings and seals are engineered to the requirements of each specific vehicle application
Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)

from

$99.99

Constructed from high-quality materials for extended durability
Integral raceway provides proper clearance between the ball and bearing riding surfaces
Ensures proper function and quiet operation
Precision-matched components deliver smooth and quiet operation
Manufactured to strict engineering quality standards
Brand may vary by location

Top Picks for 2018 Audi A4 Wheel Hardware

Upgrade Audi A4s with top-quality Wheel Hardware parts, including 3 OEM and aftermarket selections for your 2018 model.

show more show less

from

$4.29

Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
Durable construction – made of quality materials for safe, reliable service
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$87.99

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a ball-shaped seat.

from

$61.99

User friendly key guides the key into the lock pattern for easy installation and removal.
The computer generated key designs allow for an infinite number of key patterns.
The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
The bolt stem has a dacromet coating to meet O.E.M. standards.
For use with steel or aluminum wheels with a ball-shaped seat.

In-Demand TPMS Sensors for 2018 Audi A4s

Select from 20 premium TPMS Sensors parts for your 2018 Audi A4, with prices ranging from $4.99 to $7,323.00.

show more show less

from

$43.99

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
OE fit, form, and function
Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
Sensor comes fully assembled and ready to install
Ready out of the box
Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
Easy to program and covers the majority of vehicles on the road in North America
Compatible with the majority of independent TPMS programming and diagnostic tools on the market
OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
Future-proofed OE quality TPMS product supports new and pending OE technologies
Rubber valve can be replaced with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
Engineered and manufactured to OEM design and quality specifcations
Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
Compatible with the majority of independent TPMS programming and diagnostic tools on the market
Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
Future-proofed OE quality TPMS product supports new and pending OE technologies
Sensor comes fully assembled and ready to program and install
Easy to program and covers the majority of vehicles on the road in North America

from

$11.49

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

Includes 4 Rubber Press-in Valve Stems
Compatible with Autel 1-Sensors
Compatible with Autel 315MHz & 433MHz MX-Sensors
Warranty on Material and Workmanship
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$44.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
100% ID clone-able with no relearn required
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$55.99

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
Easy to program and covers the majority of vehicles on the road in North America
Compatible with the majority of independent TPMS programming and diagnostic tools on the market
Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
Sensor comes fully assembled and ready to program and install
Engineered and manufactured to OEM design and quality specifcations
Future-proofed OE quality TPMS product supports new and pending OE technologies
Aluminum valve can be replaced by Schrader clamp-in valve kit 29049

from

$11.49

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

Four Metal Valve Stems
Press-in interchangeable metal valve stem
Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
Press release valve design allows easy installation without a tool for sensor head fitting
High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

from

$5.49

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

Black Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

from

$579.99

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$7323.00

Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
Combined Frequency 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$3806.00

1-SENSOR 100 PK

from

$1299.99

The “We Fix TPMS” Bundle, part number 1SENSHOP, includes 40 MX-Sensor 1-Sensors with rubber valves, and three shop display items. An 18 x 36 inch window poster, a 72 x 24.6 inch co-branded banner, and an 8.5 x 11 inch counter card are included.

Product Features:

Includes two 20-packs of MX-Sensor 1-Sensor with Rubber Valves
Includes Co-Branded Bay Banner
Includes TPMS Service Shop Window Poster
Includes Counter Card
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$601.99

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

EZ-sensor must be programmed to specific M/M/Y vehicle
EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
EZ-sensor can be programmed by most all TPMS programming tools on the Market
Supports 314.9, 315 and 433 MHz sensor applications
Always keep your TPMS scan and programming tool up to date with the latest software
Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
Valve Core Torque = 3.5 in-lbs (0.4 Nm)

from

$579.99

The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$333.99

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$138.99

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com.

Product Features:

EZ-sensor must be programmed to specific M/M/Y vehicle.
EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
EZ-sensor can be programmed by most all TPMS programming tools on the Market
Supports 314.9, 315 and 433 MHz sensor applications
Always keep your TPMS scan and programming tool up to date with the latest software
Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Aluminum valve can be replaced by Schrader service kit 20049
Nut Torque = 71 in-lbs
Valve Core Torque = 3.5 in-lbs

from

$129.99

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensorÂ family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
Sensor must be programmed to specifi Y/M/M vehicle
Compatible with most programming tools
Make sure that your TPMS programming tool is updated to it’s latest version
Combines 314.9, 315 & 433 MHz application into one sensor
Future proofed to support new and pending OE system technologies
Optimizes inventory levels and returns
Reduces overal cost and increases speed of service
Use service kit 20018 to replace the rubber valve assembly
Valve Core Torque = 3.5 in-lbs (0.4 Nm)
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$44.99

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

Combined Frequency: 315MHz & 433MHz
Programmable with Autel TPMS Service Tools
Exclusive Press Release Button to Easily Replace Valve Stems
Program to Replace 99% of OE Sensors
Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
Meets SAE Standards J1205 & J1206
Maximum Signal Strength / Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$34.99

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Maximum Signal Strength / Battery Reliability
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$29.99

Maximum Signal Strength, Battery Reliability.
15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
Combined Frequency – 315MHz and 433MHz
Programmable with Autel TPMS Service Tools
Program to Replace 99 Percent of OE Sensors
Meets SAE Standards J1205 and J1206
Maximum Signal Strength, Battery Reliability
Professional installation is strongly suggested
The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
Once programmed, the sensor performs identically to OEM direct-fit sensors

from

$8.99

Product Features:

Chrome Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor
Warranty on Material and Workmanship

from

$4.99

The CV-002 is a titan grey metal press-in valve stem for the 1-Sensor.

Product Features:

Titan Grey Metal Press-in Valve Stem
Compatible with Autel 1-Sensor

FAQs for 2018 Audi A4 Wheels and Tires

Which Wheels and Tires are best-sellers for 2018 Audi A4s?

Out of 29 Wheels and Tires that fit 2018 Audi A4s, the following parts are the top sellers:

MX-Sensor 1-Sensor with Press-in Rubber Valve Stem and Combined Frequency (11784373) – $44.99
M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (sold by each) (22145921) – $4.29
EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 1 Sensor (11527611) – $55.99

What’s the price range for 2018 Audi A4 Wheels and Tires?

Wheels and Tire prices for the 2018 Audi A4 start at $4.29 and go up to $7,323.00 for the most premium parts.

What’s the average price of a Wheels and Tire for a 2018 Audi A4?

The average price for Wheels and Tires for the 2018 Audi A4 is $575.98. Keep in mind the variety of part types within our Wheels and Tire category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Wheels and Tires for other Audi A4 model years?

Yes, we currently carry Wheels and Tires for 23 model years of Audi A4s between 1996 and 2020. Wheels and Tires are bought most frequently for the following model years: 2020, 2019, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Wheels and Tires for my 2018 Audi A4?

The cheapest 2018 Audi A4 Wheels and Tires we carry in stock are:

M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (sold by each) (22145921) – $4.29
Titan Grey Metal Press-in Valve for 1-Sensor (12452609) – $4.99
Black Metal Press-in Valve for 1-Sensor (12452716) – $5.49
Chrome Metal Press-in Valve for 1-Sensor (12452715) – $8.99
Box of 4 Metal Press-in Valve Stems for 1-Sensor (11661518) – $11.49

What are the top-rated Wheels and Tires that fit the 2018 Audi A4?

Out of 426 reviews by customers, our 2018 Audi A4 Wheels and Tires have an average customer rating of . These are some of the highest-rated Wheels and Tire types for the 2018 Audi A4 and their top-rated products:

TPMS Sensors
- Programmable TPMS Sensor 33500 (11244718) – $43.99
- Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (11661520) – $11.49

What types of Wheels and Tires do you sell for my 2018 Audi A4?

As of 3/1/26, these are some of the most in-demand types of Wheels and Tires for a 2018 Audi A4:

Can I get help with 2018 Audi A4 Wheels and Tire orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Wheels and Tires and more.

What is your return policy for Audi A4 Wheels and Tires?

Advance Auto Parts keeps returns simple. For new Audi A4 Wheels and Tires and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2018 Audi A4 Wheels and Tires

KAI – Reconditioned OEM Aluminum Alloy Wheel, 17 X 7.5, Light Silver Metallic (Part No.ALYAZ096U20)

KAI – Reconditioned OEM Aluminum Alloy Wheel, 18 X 8, Bright Hypersilver (Part No.ALYAW014U77)

KAI – Reconditioned OEM Aluminum Alloy Wheel, 18 X 8, Machined And Bright Silver (Part No.ALYAY073U10)

KAI – Recon OEM Aluminum Alloy Wheel, 18 X 8, All Painted Medium Silver Metallic (Part No.ALYAY012U20)

Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.RDE048V21)

Autel – Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)

Autel – Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)

Huf North America – Tire Pressure Monitoring System (TPMS) Sensor (Part No.UVS7051)

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-605208)

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-633058)

Schaeffler – Wheel Set – Generation 1 (Part No.WB61008K)

Carquest Standard – Hub Assembly with Wheel Bearing (Part No.NT512598)

McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)

McGard – Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28318)

Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)

Autel – Adjustable Angle Programmable Universal TPMS Sensor – Metal, Dual Frequency (Part No.300030)

Huf North America – Direct-Fit 315MHz OE Quality TPMS Sensor for Audi, Volkswagen (Part No.RDE099V21)

Autel – 1-Sensor Bulk Box (240-Pack, Rubber Valve) (Part No.300050)

Dorman – Pik-a-Nut – Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Silver, 1 Pack (Part No.97211.1)

Rein – Wheel Bolt (Part No.HWB0011)

Dorman – M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (sold by each) (Part No.610-318)

Dorman – Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Silver (sold by each) (Part No.610-467)

REDI-Sensor – TPMS Service Kit (Part No.SE54191)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

MOOG Hub Assemblies – Wheel Bearing & Hub Assembly (Part No.512598)

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-633058)

Carquest Premium – Hub Assembly with Wheel Bearing (Part No.91-605208)

Carquest Standard – Hub Assembly with Wheel Bearing (Part No.NT512598)

KAI – Reconditioned OEM Aluminum Alloy Wheel, 17 X 7.5, Light Silver Metallic (Part No.ALYAZ096U20)

KAI – Reconditioned OEM Aluminum Alloy Wheel, 18 X 8, Machined And Bright Silver (Part No.ALYAY073U10)

Dorman – M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (sold by each) (Part No.610-318)

McGard – Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28318)

McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)

Schrader – Programmable TPMS Sensor 33500 (Part No.33500)

Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)

Autel – MX-Sensor 1-Sensor with Press-in Rubber Valve Stem and Combined Frequency (Part No.1-SENSOR)

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 1 Sensor (Part No.33700)

Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)

Autel – Black Metal Press-in Valve for 1-Sensor (Part No.CV-001)

Autel – MX-Sensor 1-Sensor: TPMS Sensors With Rubber Valve Stems, Bulk Box (20-Pack) (Part No.300010)

Autel – 1-Sensor Bulk Box (240-Pack, Rubber Valve) (Part No.300050)

Autel – 1-SENSOR 100 PK (Part No.300070)

Autel – We Fix Tpms Bundle (Part No.1SENSHOP)

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 24 Pack (Part No.33500-24BU)

Autel – MX-Sensor 1-SensorM: TPMS Sensors With Metal Valve Stems, Bulk Box (20-Pack) (Part No.300060)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 12 Piece (Part No.33500-12)

Schrader – EZ-sensor Programmable TPMS Sensor with Rubber Snap-in Valve, 4 Pack (Part No.33700-4)

Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)

Autel – MX-Sensor 1-Sensor with Press-in Metal Valve Stem and Combined Frequency (Part No.1-SENSORM)

Autel – Adjustable Angle MX-Sensor 1-Sensor (Rubber) (Part No.300020)

Autel – Adjustable Angle Programmable Universal TPMS Sensor – Metal, Dual Frequency (Part No.300030)

Autel – Chrome Metal Press-in Valve for 1-Sensor (Part No.CV-003)

Autel – Titan Grey Metal Press-in Valve for 1-Sensor (Part No.CV-002)