2017 Volkswagen Jetta Steering and Chassis Parts

Essential Steering and Chassis Parts for 2017 Volkswagen Jettas

Febi – Steering Rack Boot C (Part No.M1011452369FEB)

Steering Rack Boot C

from

$3.60
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Dorman – Suspension Control Arm (Part No.526-947)

Suspension Control Arm

from

$157.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.512-001563)

OE matched design for Form, Fit, and Function

from

$36.49
Advanced corrosion-resistant electro-coating to reduce rust

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

International Suspension Group – Tie Rod End (Part No.M301026708ISG)

Tie Rod End

from

$13.06
Tie Rod End

MOOG – Ball Joint (Part No.K500100)

Ball Joint

from

$39.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

National – Bearings (Part No.LM29711)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Power Steering Pressure Hose, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37939)

Power Steering Pressure Hose, 16mm Male "O" Ring x 18mm Male "O" Ring

from

$155.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Whiteline – Sway Bar 24Mm X Heavy Duty Blade Adjustable (Part No.BWF19XZ)

Sway Bar 24Mm X Heavy Duty Blade Adjustable

from

$275.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Febi – Sway Bar Bracket (Part No.L1040229985FEB)

Sway Bar Bracket

from

$7.61
Sway Bar Bracket

TRW – Stabilizer Link (Part No.L1030272950TRW)

Stabilizer Link

from

$51.50
TRW stabilizer links are manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match the Original Equipment design, which provides improved fuel economy, lower emissions and excellent driving comfort.

Product Features:
  • Manufactured from aluminum, corrosion resistant steel or glass-fiber reinforced plastic to match OE design
  • Provides improved fuel economy, lower emissions and excellent driving comfort
  • Reduce weight and damping vibrations
  • Proven steel versions when the glass fiber material is unsuitable due to loading conditions or space restrictions
See More

Whiteline – Sway Bar Link (Part No.KLC141)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K200702)

Stabilizer Bar Bushing Kit

from

$21.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

International Suspension Group – Sway Bar Bushing (Part No.L1050156984ISG)

Sway Bar Bushing

from

$3.89
Sway Bar Bushing

Dorman – Alignment Camber / Toe Lateral Link (Part No.528-316)

Alignment Camber / Toe Lateral Link

from

$171.99
This alignment camber and toe lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Rack & Pinion Bellows Kit (Part No.K100184)

Rack & Pinion Bellows Kit

from

$21.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Manufactured using premium materials
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-2912)

Steering Rack Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Back Up Light Connector

from

$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Valeo – Turn Signal and Combination Switch (Part No.P3010554859VAL)

Turn Signal and Combination Switch

from

$356.89
The Valeo Turn Signal Combination Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Dorman – Right Steering Knuckle (Part No.698-058)

Right Steering Knuckle

from

$429.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Right Rear Knuckle (Part No.698-184)

Right Rear Knuckle

from

$509.99
This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Left Steering Knuckle (Part No.698-311)

Left Steering Knuckle

from

$397.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Febi – Bilstein Ball Joint (Part No.L202052528FEB)

Bilstein Ball Joint

from

$41.76
FEBI strictly complies with the specification of the vehicle manufacturers. They make sure that the ball joint exactly fit the corresponding vehicle type.

Product Features:
  • Original equipment quality
  • Solutions Made in Germany
  • Manufacturing expertise
  • Triple-checking system
  • Technology leader
See More

Rein – Ball Joint (Part No.SCB0134R)

Ball Joint

from

$29.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

International Suspension Group – Ball Joint (Part No.L2020461525ISG)

Ball Joint

from

$16.24
The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Whiteline – Roll Centre/Bump Steer Correction Kit (Part No.KCA472)

Roll Centre/Bump Steer Correction Kit

from

$249.99
A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tunning of camber settings with up to a degree of negative camber gain, perfect for track days and spirited driving! Raising the front roll-centre (along with negative camber) results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it’s potential.

Product Features:
  • Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
  • Engineered to rectify roll centre on lowered vehicles, optimising the vehicles steering characteristics.
  • Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Upgrade your 2017 Volkswagen Jetta with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2017 Volkswagen Jetta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Jetta functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Steering and Chassis Parts for the 2017 Volkswagen Jetta, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Steering Columns upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2017 Volkswagen Jetta at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $1.83 to $839.99, with an average price of $110.80. Our 56 Steering and Chassis Parts in stock come from 14 trusted brands, so you’re sure to find the right part for your 2017 Volkswagen Jetta without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Volkswagen Jetta, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Carquest Premium, Moog, Driveworks, and more. Carquest Premium Steering and Chassis Parts start at just $27.99 and boast an impressive 4 stars average rating from customers. Moog and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $8.79, and at an average 4 stars rating. With 166 customer reviews and counting, our 2017 Volkswagen Jetta Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Volkswagen Jetta is always ready to roll. We’re committed to providing you with everything you need to keep your Jetta in top shape, all in one place. Start shopping confidently below for your 2017 Volkswagen Jetta!

Best-Selling Power Steering Parts for 2017 Volkswagen Jettas

Enhance the driving experience in your Volkswagen with 7 quality Power Steering Part components, starting at $2.73.

Beck/Arnley – Steering Rack Boot Kit (Part No.103-2912)

Steering Rack Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Back Up Light Connector

from

$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Febi – Steering Rack Boot C (Part No.M1011452369FEB)

Steering Rack Boot C

from

$3.60
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Febi – Steering Rack Boot Clamp (Part No.M1011452370FEB)

Steering Rack Boot Clamp

from

$3.63
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Carquest Premium – Power Steering Pressure Hose, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.37941)

Power Steering Pressure Hose, 16mm Male "O" Ring x 18mm Male "O" Ring

from

$198.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)

Tapered Roller Bearing

from

$8.79
Product Features:
  • Brand may vary by location
See More

MTC – Radiator Hose Clamp (Part No.G2010932381MTC)

Radiator Hose Clamp

from

$2.73
Radiator Hose Clamp

Most Popular 2017 Volkswagen Jetta Steering Columns

Customize your Volkswagen with 1 Steering Columns products like Steering Column Switch Housing, all priced under $356.89.

Valeo – Turn Signal and Combination Switch (Part No.P3010554859VAL)

Turn Signal and Combination Switch

from

$356.89
The Valeo Turn Signal Combination Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Top Picks for 2017 Volkswagen Jetta Ball Joints

Upgrade Volkswagen Jettas with top-quality Ball Joints parts, including 12 OEM and aftermarket selections for your 2017 model.

MOOG – Ball Joint (Part No.K80662)

Ball Joint

from

$75.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Carquest Premium – Ball Joint (Part No.410-234680)

Ball Joint

from

$46.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Ball Joint (Part No.410-234681)

Ball Joint

from

$46.49
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621950)

Control Arm and Ball Joint Assembly

from

$109.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Ball Joint (Part No.K500390)

Ball Joint

from

$65.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Restores like-new steering and handling
  • Designed to meet or exceed original equipment performance
  • Broad coverage for foreign and domestic applications
  • Engineered to provide long life and dependability
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621949)

Control Arm and Ball Joint Assembly

from

$109.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Ball Joint (Part No.K500391)

Ball Joint

from

$65.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Restores like-new steering and handling
  • Designed to meet or exceed original equipment performance
  • Broad coverage for foreign and domestic applications
  • Engineered to provide long life and dependability
See More

MOOG – Ball Joint (Part No.K80663)

Ball Joint

from

$77.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • Hardened ball stud made of OE equivalent or better materials to withstand higher loads
  • Easy to install.
  • Construction and design validated by MOOG engineers
  • Premium forged housing with increased cross section of up to 52% more material in key areas
  • Broad coverage for foreign and domestic applications
  • Designed to meet or exceed original equipment performance
See More

Dorman – Suspension Control Arm (Part No.526-407)

Suspension Control Arm

from

$162.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Dorman – Suspension Control Arm (Part No.526-408)

Suspension Control Arm

from

$140.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L2020179875LEM)

OE Replacement Ball Joint

from

$65.78
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – OE Replacement Ball Joint (Part No.L2020179876LEM)

OE Replacement Ball Joint

from

$65.31
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

In-Demand Tie Rods for 2017 Volkswagen Jettas

Select from 11 premium Tie Rods parts for your 2017 Volkswagen Jetta, with prices ranging from $29.99 to $65.99.

Delphi – Tie Rod End (Part No.M3010405634DEL)

Tie Rod End

from

$31.28
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

MOOG – Tie Rod End (Part No.ES80666)

Tie Rod End

from

$58.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

MOOG – Tie Rod End (Part No.ES80667)

Tie Rod End

from

$58.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.700-234677)

OE matched design for Form, Fit, and Function

from

$47.99
Advanced corrosion-resistant electro-coating to reduce rust

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Thread locking compound included.
See More

Carquest Premium – Tie Rod End (Part No.310-234678)

Tie Rod End

from

$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – Tie Rod End (Part No.310-234679)

Tie Rod End

from

$42.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Tie Rod End (Part No.EV80665)

Tie Rod End

from

$60.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Assembled in the USA
  • TIME SAVINGS — Pre-applied thread locking compound makes installation easier and prevents self-loosening
See More

MOOG – Steering Tie Rod End (Part No.ES800506)

Steering Tie Rod End

from

$65.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

MOOG – Tie Rod End (Part No.ES800505)

Tie Rod End

from

$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Loose or worn chassis parts can lead to premature tire wear
  • Exclusive cover plate protects against contaminants leaking into the bearing surface
  • Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
  • Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
See More

Rein – Inner Tie Rod (Part No.SCI0138R)

Inner Tie Rod

from

$29.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

Delphi – Tie Rod End (Part No.M3010405633DEL)

Tie Rod End

from

$31.28
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi tie rods are fatigue tested to avoid failure
  • Delphi includes the necessary accessories for a complete job
  • Delphi machines the ball studs to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

Most Sold 2017 Volkswagen Jetta Sway Bars

Explore our best-selling Volkswagen parts for the 2017 Jetta among 20 OEM and aftermarket options starting from $1.83.

Driveworks – Sway Bar Link Kit (Part No.DW-K80478)

Sway Bar Link Kit

from

$32.49
Sway Bar Link Kit

MOOG – Stabilizer Bar Link (Part No.K80478)

Stabilizer Bar Link

from

$53.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Carquest Premium – Stabilizer Bar Link (Part No.644-01562)

Stabilizer Bar Link

from

$36.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.512-001563)

OE matched design for Form, Fit, and Function

from

$36.49
Advanced corrosion-resistant electro-coating to reduce rust

Product Features:
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

MOOG – Stabilizer Bar Link (Part No.K80482)

Stabilizer Bar Link

from

$50.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Improves upon OE designs
  • Quiet, dependable operation
  • Provides like-new steering, ease of installation and longer life
  • Incorporates proven design and engineering features
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201862)

Stabilizer Bar Bushing Kit

from

$13.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Lemfoerder – Sway Bar Link (Part No.L1030528756LEM)

Sway Bar Link

from

$57.12
Sway Bar Link

MOOG – Stabilizer Bar Bushing Kit (Part No.K201861)

Stabilizer Bar Bushing Kit

from

$11.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Febi – Sway Bar Link Nut (Part No.L1038413440FEB)

Sway Bar Link Nut

from

$1.83
Sway Bar Link Nut

Whiteline – Adjustable Sway Bar Kit for Improved Handling and Performance (Part No.BWK002)

Adjustable Sway Bar Kit for Improved Handling and Performance

from

$839.99
Engineered to ‘Activate More Grip’, BWK002 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 24mm 3 point adjustable front sway bar and 24mm 3 point adjustable rear sway bar, the kit is completed with front and rear sway bar links and mounting accessories (where applicable) that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Sway Bar Kit.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
See More

Whiteline – Sway Bar 24Mm X Heavy Duty Blade Adjustable (Part No.BWF19XZ)

Sway Bar 24Mm X Heavy Duty Blade Adjustable

from

$275.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Whiteline – Sway Bar 24Mm X Heavy Duty Blade Adjustable (Part No.BWR20XZ)

Sway Bar 24Mm X Heavy Duty Blade Adjustable

from

$275.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 24mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
See More

Whiteline – Sway Bar Link (Part No.KLC167A)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Whiteline – Sway Bar Link (Part No.KLC141)

Sway Bar Link

from

$165.99
Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

Whiteline – Sway Bar Link (Part No.W23180)

Sway Bar Link

from

$74.99
Do you have every sway bar link on the shelf? Well you don’t need too, Whiteline have developed a clever cut to length universal sway bar link that has a 10mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
  • Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
See More

International Suspension Group – Sway Bar Link (Part No.L1030528756ISG)

Sway Bar Link

from

$27.27
Sway Bar Link

Whiteline – Sway Bar Mount Bushing (Part No.W23617)

Sway Bar Mount Bushing

from

$25.99
Designed to fit a 22.5mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W23622)

Sway Bar Mount Bushing

from

$25.99
Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
  • Internal grease reservoirs provide continual self lubrication for optimum friction management.
See More

Febi – Sway Bar Bracket (Part No.L1040229985FEB)

Sway Bar Bracket

from

$7.61
Sway Bar Bracket

Febi – Sway Bar Link Nut (Part No.L1038422923FEB)

Sway Bar Link Nut

from

$1.86
Sway Bar Link Nut

Top-Rated Steering and Chassis Parts Brands For Your 2017 Volkswagen Jetta

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2017 Volkswagen Jettas. Below you’ll find some of our best rated Steering and Chassis Parts from Carquest Premium, Moog, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2017 Jetta start at just $8.79 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2017 Volkswagen Jetta Steering and Chassis Parts

When it comes to maintaining or upgrading your 2017 Volkswagen Jetta, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Steering and Chassis Parts, specifically designed for the 2017 Volkswagen Jetta. With over 9 Carquest Premium brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99, with an average price of just $58.60. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Stabilizer Bar Link
from
$36.99
This product is not rated

Stabilizer Bar Link

“”

Tie Rod End
from
$42.99
This product is not rated

Tie Rod End

“”

Ball Joint
from
$46.49
This product is not rated

Ball Joint

“”

Popular Moog 2017 Volkswagen Jetta Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2017 Volkswagen Jetta owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2017 Jetta, Advance Auto Parts carries a full inventory of 15 Moog Steering and Chassis Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $11.29 to $109.99, plus, with more than 13 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Tie Rod End
from
$60.99
This product is not rated

Tie Rod End

“”

Control Arm and Ball Joint Assembly
from
$109.99
This product is not rated

Control Arm and Ball Joint Assembly

“”

Stabilizer Bar Link
from
$50.99
This product is not rated

Stabilizer Bar Link

“”

FAQs for 2017 Volkswagen Jetta Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2017 Volkswagen Jettas?

Out of 56 Steering and Chassis Parts that fit 2017 Volkswagen Jettas, the following parts are the top sellers:

What’s the price range for 2017 Volkswagen Jetta Steering and Chassis Parts?

Steering and Chassis Part prices for the 2017 Volkswagen Jetta start at $1.83 and go up to $839.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2017 Volkswagen Jetta?

The average price for Steering and Chassis Parts for the 2017 Volkswagen Jetta is $110.80. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Volkswagen Jetta model years?

Yes, we currently carry Steering and Chassis Parts for 44 model years of Volkswagen Jettas between 1980 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2017 Volkswagen Jetta?

The cheapest 2017 Volkswagen Jetta Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 2017 Volkswagen Jetta?

Out of 166 reviews by customers, our 2017 Volkswagen Jetta Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2017 Volkswagen Jetta and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 2017 Volkswagen Jetta?

Can I get help with 2017 Volkswagen Jetta Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Steering and Chassis Parts and more.

What is your return policy for Volkswagen Jetta Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Jetta Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.