2017 Toyota Tacoma Shocks and Struts

Essential 2017 Toyota Tacoma Shocks and Struts

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Rare Parts – Shock Mount (Part No.RP53639)

Shock Mount

from

$95.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Meets or exceeds OE requirements
  • Helps restore steering and handling
See More

Timbren SES – Rubber Spring, Inside Coil Spring Mount, 6,000Lb, Aeon Hollow Rubber (Part No.TORTAC4A)

Rubber Spring, Inside Coil Spring Mount, 6,000Lb, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Timbren SES – Rubber Spring Inside Coil Spring Mnt 6000 Lb. Cap AEON Rubber Helper Springs/ Brackets/ Hardware (Part No.TORTUN4)

Rubber Spring Inside Coil Spring Mnt 6000 Lb. Cap AEON Rubber Helper Springs/ Brackets/ Hardware

from

$306.99
Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
  • Limited Lifetime Warranty
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.271371R)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$198.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

aFe POWER – Sway-A-Way Coilovers (Part No.101-5600-01)

Sway-A-Way Coilovers

from

$1428.99
aFe Control introduces these Sway-A-Way High Performance replacement Coilovers for the 1996-2004 Toyota Tacoma. These 2.5″ diameter Coilovers feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These front Coilovers are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. The kit comes pre-set for 2″-2.5″ of lift.  Also included is  a spanner wrench for you to adjust your ride height to find your perfect blend of performance and style. This package is designed as a direct fit application and requires no modifications to the vehicle.

Product Features:
  • CNC Machined Components Made To The Strictest Tolerances
  • Polished Nitro Steel Shaft for Strength And Durability
  • Teflon Lined Steel Spherical Bearings
  • Multi-Seal Carrier To Ensure Zero Leakage
See More

KYB – High Pressure Monotube Gas Shock (Part No.KG5462)

High Pressure Monotube Gas Shock

from

$76.99
The KYB Gas-a-just monotube truck shock absorber has additional performance advantages over the twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The Gas-a-Just is available as an OE monotube replacement and as an OE twin-tube performance upgrade. The KYB Gas-a-Just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Trucks
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Sachs – Shock Mounting Kit (Part No.L4049573997SAC)

Shock Mounting Kit

from

$70.25
Shock Mounting Kit

Monroe – Strut-Mate Strut Mount Stud Plate (Part No.907921)

Strut-Mate Strut Mount Stud Plate

from

$39.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:
  • PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
  • REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
  • REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
  • RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
  • EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
See More

MOOG – Shock Mount (Part No.K160030)

Shock Mount

from

$58.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Engineered to meet or exceed OE requirements
  • Superior rubber to steel bonding for durability
  • High polish chrome steel bearing races
  • Replacement helps restore vehicle handling
  • Includes new spring seat insulator and installation hardware to eliminate noise issues
  • Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
See More

MOOG – Shock Mount (Part No.K160266)

Shock Mount

from

$50.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to meet or exceed OE requirements
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

KYB – STRUT MOUNTING KIT (Part No.L3033440631KYB)

STRUT MOUNTING KIT

from

$53.52
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37113)

OESpectrum Light Truck Shock Absorber

from

$79.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

Rancho – RS5000X Shock Absorber (Part No.RS55180)

RS5000X Shock Absorber

from

$88.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
  • Rebound Bumper
See More

Bilstein – 4600 Series – Shock Absorber (Part No.L4000397035BIL)

4600 Series - Shock Absorber

from

$120.60
Finish: Black Paint Bilstein B6 4600 gas pressure shock absorbers and struts are designed specifically to help your truck, van or SUV reach its pinnacle in ride performance and handling, while still providing the comfortable ride that has come to be expec

Product Features:
  • Monotube gas pressure technology
  • Easy to install; direct bolt-on; no modification required
  • Improved control and stability, precise handling, ultimate performance, and incredible comfort
  • BILSTEIN’s unique piston design offers greater sensitivity and superior vehicle control
  • Lifetime Warranty
See More

Monroe – Gas-Matic LT Shock Absorber (Part No.59369)

Gas-Matic LT Shock Absorber

from

$36.99
Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:
  • Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

KYB – High Pressure Monotube Gas Shock (Part No.554350)

High Pressure Monotube Gas Shock

from

$99.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Toyota Tacomas
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Skyjacker – Hydro Shock W/Red Boot (Part No.H7048)

Hydro Shock W/Red Boot

from

$55.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:
  • Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
  • Multi Stage Velocity Sensitive Valving
  • Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
  • Bonded Iron Piston For Durability And Longer Shock Life
  • Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
  • Orifice Disk For Axle Control In Any Condition
  • Red Polyurethane Bushings
See More

Monroe – OESpectrum Light Truck Shock Absorber (Part No.37112)

OESpectrum Light Truck Shock Absorber

from

$82.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® light truck shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • IMPROVES STABILITY — ASD (Acceleration Sensitive Damping) valving technology and fluon-banded piston deliver greater control and handling while improving ride comfort
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • BUILT TO LAST — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
  • 1-3/8 inch (34.9 mm) bore (On most applications)
  • 5/8-inch (15.9 mm) diameter piston rod (On most applications)
See More

AST – Polyurethane Sway Bar Link Bushing (Part No.L10311094426AST)

Polyurethane Sway Bar Link Bushing

from

$11.37
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

2017 Toyota Tacoma Shocks and Struts

Maybe you’re in the middle of a full rebuild of that 2017 Toyota Tacoma. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 30 different Shocks and Struts in our inventory ranging from $11.37 to $1,819.99. That means you can find the exact parts or products you need to keep that 2017 Toyota Tacoma running smoothly.

Shocks and Struts are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2017 Toyota Tacoma. Monroe, Rancho, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Shocks and Struts for your 2017 Toyota Tacoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 477 reviews in this category, some of the top rated parts include Gas-Matic Strut with 5.0 stars.

So if you’re in the market for aftermarket Shocks and Struts to keep your 2017 Toyota Tacoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Shocks and Struts Brands To Make Your 2017 Toyota Tacoma Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2017 Toyota Tacoma demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your Tacoma the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.

Popular Rancho Shocks and Struts

We carry Rancho parts in our stock across Rear Shock and Struts categories, plus more. For a 2017 Toyota Tacoma, our most popular Rancho Shocks and Struts include:
RS9000XL Shock Absorber
from $161.99
(1)
RS9000XL Shock Absorber
Rear Shock and Struts

FAQs for 2017 Toyota Tacoma Shocks and Struts

What are the most purchased Shocks and Struts for the 2017 Toyota Tacoma?

Out of 30 Shocks and Struts for the 2017 Toyota Tacoma, the most popular in our inventory are:
OESpectrum Strut
from $159.99
(1)
OESpectrum Strut
Front Shock and Struts
Shock Mount
from $50.99
This product is not rated
Shock Mount
Shock Mounts
RS5000X Shock Absorber
from $83.99
This product is not rated
RS5000X Shock Absorber
Rear Shock and Struts

What are the top-rated 2017 Toyota Tacoma Shocks and Struts?

Top-rated Shocks and Struts for your 2017 Toyota Tacoma based on customer reviews/ratings are:
Gas-Matic Strut
from $97.99
(2)
Gas-Matic Strut
“Back to an original ride, very good struts”