2017 Infiniti QX60 Engine Parts
Find Your Specific 2017 Infiniti QX60 Engine Parts
Below you will find various in-demand Infiniti Engine Parts, components and accessories for your 2017 QX60. Advance Auto Parts has popular QX60 parts like Engine Timing Parts, Camshafts, Engine Gaskets and Seals and more. You’ll also find aftermarket and OEM Engine Parts for other QX60 model years including
2014,
2015,
2016,
2018 and more. Select a category of 2017 Infiniti QX60 Engine Parts below and start saving instantly.
Popular 2017 Infiniti QX60 Engine Parts Categories
Essential Engine Parts for 2017 Infiniti QX60s
DENSO – Crankshaft Position Sensor (Part No.196-4009)
from
$135.99
DENSO’s crankshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s crankshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.
Product Features:
See More
Product Features:
- OE technology adapted for the aftermarket
- Reduces emissions, increased performance
- Delivers the highest reliability and detection accuracy
Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.9444)
from
$81.99
Anchor 9444 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2018
- Weight approx: 2 Lbs
Anchor – Engine Mount: Rear, 1 Piece (Part No.10021)
from
$113.99
Anchor 10021 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2013-2020
- Weight approx: 6 Lbs
- Hydraulic
- With Vacuum
Felpro – Engine Crankshaft Seal Kit (Part No.BS 40694)
from
$26.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – OIL COOLER (Part No.918-938)
from
$811.99
OIL COOLER
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5975)
from
$65.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28410)
from
$2.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
National – Shaft Repair Sleeve (Part No.99147)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Hitachi – Engine Variable Valve Timing (Vvt) Solenoid (Part No.VTS0003)
from
$166.99
Hitachi’s Variable Timing Control Cover Assembly is an aluminum cover that contains the Variable Timing Solenoid valve. This cover mounts to the engine’s Timing Chain Case Front Cover, which encapsulates the Variable Timing Gear (Camshaft Phasor). The Variable Timing Conntrol Assembly main function is to control oil pressure to the camshaft phasors (camshaft sprockets), which control the engine’s valve timing. The camshaft phasors (Variable Timing Gear) are mounted to the camshaft.
Product Features:
See More
Product Features:
- Meets the OE performance and durability standards for this application
- Meets the OE performance and durability standards for this application
- Additional O-ring located in the solenoid housing prevents water from damaging electrical components
- Optimally designed electromagnet requires less energy to maintain operating positions
- Precision machined ports and high-quality seals create less pressure drop
- Hitachi’s Variable Timing Solenoid (VTSs) precisely regulate oil flow to the Variable Timing Gear to allow the engine to adjust timing for optimal performance and fuel economy. Our VTS have a(n) optimally designed electromagnet(s) requiring less energy to
Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S948T)
from
$31.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
- Heat Treated
Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)
from
$8.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Cloyes Gear – Engine Oil Pump Sprocket (Part No.S945)
from
$14.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Chain (Part No.C730F)
from
$99.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
- Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
- Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5608)
from
$37.49
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Extensively tested and measured for function, fitment, and durability to ensure optimal performance
- CAD designed and manufactured using premium materials
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Balance Shaft Chain (Part No.C902)
from
$21.49
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Carquest Premium – Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10107)
from
$12.99
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
Product Features:
See More
Product Features:
- Provides proper seal to ensure leak prevention
- Stops engine blow by
- High quality construction
- Meets all OEM specifications
Dorman – Engine Valve Cover (Part No.264-774)
from
$139.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Product Features:
See More
Product Features:
- Direct replacement – this valve cover matches the original equipment part for fit and function
- Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution – offers original equipment performance at competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S947)
from
$19.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Spartan – Engine Long Block; Nissan VQ35DE 2015 Engine (Part No.344M)
from
$5154.99
Your remanufactured engine is tested in several specific ways after being assembled; Multiple Pressure tests. Each component is carefully checked after being cleaned to see if cracks or other defects exist in the casting. After being assembled, we pressure
Product Features:
See More
Product Features:
- Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your First !
- Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
- Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
- Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.
Cloyes Gear – Engine Balance Shaft Chain Tensioner (Part No.9-5606)
from
$54.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Felpro – TIMING COVER GASKET SET (Part No.TCS 45997)
from
$30.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72821)
from
$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE – Available for domestic and foreign nameplate vehicles
Carquest Premium – Camshaft Sensor (Part No.CSC1072)
from
$43.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Felpro – Engine Oil Cooler Gasket Set (Part No.ES 73076)
from
$16.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Felpro – Engine Oil Cooler Seal (Part No.72493)
from
$6.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
National – Engine Crankshaft Seal (Part No.228411)
from
$51.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72900)
from
$57.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Sealed Power – Engine Piston Ring Set (Part No.E-1010KC .50MM)
from
$98.99
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Chrome plated top ring facings for enhanced performance under demanding conditions
- Second rings seat instantly, properly control inter-ring pressure to improve cylinder sealing, provide efficient piston-to-cylinder heat transfer and aid in effective oil control
- Oil rings are unequalled at controlling oil; design keeps tension uniform while assuring a positive seal
- In the box: compression rings, rails and oil spacer
Upgrade your 2017 Infiniti QX60 with Top-Quality Engine Parts
When it comes to maintaining or upgrading your 2017 Infiniti QX60, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Infiniti or enhancing its overall performance, Engine Parts are key to keeping your QX60 functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Engine Parts for the 2017 Infiniti QX60, designed to meet your needs without breaking the bank.
From
Engine Timing Part
replacements to
Camshafts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2017 Infiniti QX60 at great prices.
Our Engine Parts inventory for this model
ranges from just $2.99 to $3,069.99, with
an average price of $136.54.
Our 62 Engine Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2017 Infiniti QX60 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Infiniti QX60, we stock popular OEM and aftermarket Engine Parts from top names
like Felpro, National, Anchor, and more.
Felpro Engine Parts
start at just $8.49 and boast an impressive 4.6 stars average rating from customers.
National and Anchor also bring quality to the table, with Engine Parts available starting at $9.99, and at an average 4.3 stars rating.
With 176 customer reviews and counting, our 2017 Infiniti QX60 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2017 Infiniti QX60 is always ready to roll. We’re committed to providing you with everything you need to keep your QX60 in top shape, all in one place.
Start shopping confidently below for your 2017 Infiniti QX60!
Best-Selling Engine Timing Parts for 2017 Infiniti QX60s
Enhance the driving experience in your Infiniti with 16 quality Engine Timing Part components, starting at $9.99.
National – Multi Purpose Seal (Part No.224650)
from
$9.99
Product Features:
See More
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg F to 300 Deg F / -29 Deg C to 49 Deg C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5595)
from
$91.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Timing Chain (Part No.C721F)
from
$49.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Cloyes Gear – Engine Timing Chain (Part No.9-4212)
from
$65.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit – delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Pre-stressed and heat-treated steel construction for increased strength, and wear resistance, delivering long-term durability even in high-stress environments
- Cloyes chains are engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, and maintaining accurate timing
- Designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone chain, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5596)
from
$92.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain tensioner guide serves as a guide (or track) for the timing chain and applies tension to the system, connecting crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability and that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1155)
from
$139.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
Product Features:
See More
Product Features:
- Precision-wound coated copper windings increase product durability and life cycle.
- Hard-coated and anodized spool valve to prevent corrosion and increase service life.
- Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
- Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cloyes Gear – Engine Timing Chain Kit (Part No.9-4212SE)
from
$295.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- Cloyes chains are pre-stressed and heat-treated. Engineered and manufactured with precision pitch control to ensure optimal chain-to-sprocket fit reducing noise, minimizing fatigue, maintaining accurate timing and delivering long-term durability.
- Sprockets are CAD designed, manufactured using premium material and heat-treated. Featuring precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs.
- Timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain. All are CAD designed and manufactured using premium materials allowing for smooth installation and reliable performance.
- Chain guides serve as a guide (or track) for the timing chain and either apply tension to the system or simply give it a path, connecting crankshaft and camshaft ensuring proper alignment and timing. CAD designed and manufactured using premium materials,
- All timing components designed in the USA and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance.
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks.
- Backed by Limited Lifetime Warranty and over 100 years of engineering leadership with unmatched technical support and repair confidence in every kit.
Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1383)
from
$276.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
Product Features:
See More
Product Features:
- Precision-wound coated copper windings increase product durability and life cycle.
- Hard-coated and anodized spool valve to prevent corrosion and increase service life.
- Threaded mounting bolt, hardware, and/or gaskets where applicable for easy installation.
- Thermoplastic that is resistant to high temperatures, moisture, and chemicals.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure product reliability, every time.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Dorman – Variable Valve Timing Solenoid (Part No.916-604)
from
$83.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.
Product Features:
See More
Product Features:
- Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications
- Durable construction – this part is made from quality materials to ensure a long service life
- Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
- Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5442)
from
$73.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Timing Chain Tensioner (Part No.9-5975)
from
$65.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Balance Shaft Chain Tensioner (Part No.9-5606)
from
$54.99
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Meet or exceed OEM performance requirements
- Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience
Cloyes Gear – Engine Timing Chain Tensioner Guide (Part No.9-5608)
from
$37.49
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Extensively tested and measured for function, fitment, and durability to ensure optimal performance
- CAD designed and manufactured using premium materials
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Chain Guide (Part No.9-5609)
from
$34.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems. A timing chain guide serves as a guide (or track) for the timing chain, connecting the crankshaft and camshaft ensuring proper alignment and timing. Cloyes timing chain guides use the latest in design and material technology, ensuring quiet operation, durability that meet or exceed OEM performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service.
Product Features:
See More
Product Features:
- CAD designed and manufactured using premium materials for OE-level fit and function, allowing for smooth installation and reliable performance
- Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
- Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
- Backed by Limited and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S907)
from
$29.99
Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Cloyes Gear – Engine Timing Balance Shaft Chain (Part No.C902)
from
$21.49
Meets or exceeds OEM performance requirements. Cloyes utilizes the latest in design And material technology, ensuring quiet And maintenance-free experience.
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Most Popular 2017 Infiniti QX60 Camshafts
Customize your Infiniti with 4 Camshafts products
like Camshaft Position Sensors, all
priced under $113.99.
Carquest Premium – Camshaft Sensor (Part No.CSC1072)
from
$43.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.
Product Features:
See More
Product Features:
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Delphi – Engine Camshaft Position Sensor (Part No.SS11359)
from
$52.99
Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.
Product Features:
See More
Product Features:
- Delphi products are manufactured in a Delphi ISO certified facility
- Designed digital output for maximum signal to noise ratio
- All parts used in the manufacture process are Delphi validated
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
NTK – Engine Camshaft Position Sensor (Part No.EC0006)
from
$58.99
The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.
Product Features:
See More
Product Features:
- THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
- OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
- EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
- PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
- INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors
DENSO – Camshaft Position Sensor (Part No.196-4001)
from
$113.99
DENSO’s camshaft position sensors are manufactured to the strictest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technology which helps control ignition timing more precisely.
Product Features:
See More
Product Features:
- OE technology adapted for the aftermarket
- Reduces emissions, increased performance
- Delivers the highest reliability and detection accuracy
Top Picks for 2017 Infiniti QX60 Engine Gaskets and Seals
Upgrade Infiniti QX60s with top-quality Engine Gaskets and Seals parts, including 8 OEM and aftermarket selections for your 2017 model.
Felpro – TIMING COVER GASKET SET (Part No.TCS 45997)
from
$30.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Engine Valve Cover Gasket Set (Part No.VS 50831 R)
from
$37.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
- SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72821)
from
$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE – Available for domestic and foreign nameplate vehicles
National – Engine Crankshaft Seal (Part No.228411)
from
$51.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
Felpro – VALVE STEM SEAL SET (Part No.SS 70157)
from
$45.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE – Available for domestic and foreign nameplate vehicles
Felpro – Engine Oil Cooler Gasket Set (Part No.ES 73076)
from
$16.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Victor Reinz – Engine Valve Cover Gasket Set (Part No.71-15442-00)
from
$43.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Dana engineering-approved for fit, form and function
- Meets or exceeds OE specifications
Victor Reinz – RTV Silicone (Part No.70-31414-10)
from
$9.99
Product Features:
See More
- Resistant to temperatures from -58 Deg. F to 482 Deg. F, and briefly up to 572 Deg. F (-50 Deg. C to 250 Deg. C, briefly to 300 Deg. C)
- Insignificant shrinkage and loss of mass even in high-heat environments
- Fast-curing, low-odor, noncorrosive (pH neutral, non-acidic, non-oxidizing), and will not harm oxygen sensors
- Sealing gap 0.006 in (0.15 mm)
In-Demand Engine Mounts for 2017 Infiniti QX60s
Select from 8 premium Engine Mounts parts for your 2017 Infiniti QX60, with prices ranging from $52.99 to $137.99.
Anchor – Torque Strut Motor Mount: Right, 1 Piece (Part No.9444)
from
$81.99
Anchor 9444 The Torque Strut prevents engine rocking. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2018
- Weight approx: 2 Lbs
Anchor – Engine Mount: Front, 1 Piece (Part No.9808)
from
$95.99
Anchor 9808 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2022
- Weight approx: 5 Lbs
- Hydraulic
- With Vacuum
Anchor – Engine Mount: Right, 1 Piece (Part No.9625)
from
$79.99
Anchor 9625 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2014
- Weight approx: 3 Lbs
- Hydraulic
Anchor – Engine Mount: Right, 1 Piece (Part No.9809)
from
$79.99
Anchor 9809 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2007-2020
- Weight approx: 6 Lbs
- Hydraulic
Anchor – Engine Mount: Rear, 1 Piece (Part No.9806)
from
$137.99
Anchor 9806 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2009-2020
- Weight approx: 5 Lbs
- Hydraulic
- With Vacuum
Anchor – Engine Mount: Front, 1 Piece (Part No.9991)
from
$109.99
Anchor 9991 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2009-2020
- Weight approx: 5 Lbs
- Hydraulic
- With Vacuum
Anchor – Engine Mount: Rear, 1 Piece (Part No.10021)
from
$113.99
Anchor 10021 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 2013-2020
- Weight approx: 6 Lbs
- Hydraulic
- With Vacuum
Anchor – Engine Mount (Part No.10244)
from
$52.99
Product Features:
See More
- This mount supports the engine and dampens vibration.
- Natural and SBR rubber provide maximum life and performance.
- Steel fasteners are heat treated grade 5 bolts.
- A special bonding agent is used to ensure a rubber to metal bond.
- Rubber material is mixed to specific Durometer, hardness.
- Limited Warranty.
- All mounts are specifically engineered and designed to OE standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality.
- Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance and aging stability to ensure maximum life and performance.
- Any included fasteners are hardened steel with heat treated Grade No. 5 bolts.
- Chemlock bonding agent is used to ensure a superior rubber-to-metal bond.
- All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements.
- Hydraulic Mounts, applicable where OE, are specifically engineered for high vibration and torque applications and are filled with special hydraulic fluid to dampen excess noise and vibration.
Most Sold 2017 Infiniti QX60 Valve Cover and Cylinder Heads
Explore our best-selling Infiniti parts for the 2017 QX60 among 6 OEM and aftermarket options starting from $47.99.
Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72198)
from
$90.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72900)
from
$57.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
Spartan – Engine Cylinder Head; Nissan QR25D Hybrid Head (Part No.2347K)
from
$901.99
Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.
Product Features:
See More
Product Features:
- All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
- All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
- All threads and machined surfaces are and repaired with technology that exceeds the original metal
- Non-sealing iron surfaces painted to prevent oxidization
Autotecnica – ENGINE VALVE COVER (Part No.NI1422902)
from
$68.99
ENGINE VALVE COVER
Autotecnica – VALVE COVER W/ GASKE (Part No.NI1418704)
from
$62.99
VALVE COVER W/ GASKE
Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26659 PT)
from
$47.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Top-Rated Engine Parts Brands For Your 2017 Infiniti QX60
Shop for the best-rated brands offering Engine Parts and other products for your 2017 Infiniti QX60s. Below you’ll find some of our best rated Engine Parts from Felpro, National, and Anchor, and more. Engine Parts from these brands that fit a 2017 QX60 start at just $8.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Felpro 2017 Infiniti QX60 Engine Parts
When it comes to maintaining or upgrading your 2017 Infiniti QX60, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 2017 Infiniti QX60. With over 2 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.49, with an average price of just $17.74. Plus, with over 110 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular National 2017 Infiniti QX60 Engine Parts
National auto parts is one of the highest quality Engine Part brands in the market. Any 2017 Infiniti QX60 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2017 QX60, Advance Auto Parts carries a full inventory of 2 National Engine Parts. Plus you will be keeping your Infiniti in peak condition while saving money because prices on these National Engine Parts range from $9.99 to $41.99, plus, with more than 22 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
from
$9.99
(20)
Multi Purpose Seal
“Perfect replacement for my vintage Pontiacs. I recommend this particular seal to al of my customers.”
from
$41.99
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
FAQs for 2017 Infiniti QX60 Engine Parts
Which Engine Parts are best-sellers for 2017 Infiniti QX60s?
Out of 62 Engine Parts that fit 2017 Infiniti QX60s, the following parts are the top sellers:
- Torque Strut Motor Mount: Right, 1 Piece (10057239) – $81.99
- Camshaft Sensor (12339331) – $43.99
- Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481438) – $12.99
What’s the price range for 2017 Infiniti QX60 Engine Parts?
Engine Part prices for the 2017 Infiniti QX60 start at $2.99 and go up to $3,069.99 for the most premium parts.
What’s the average price of a Engine Part for a 2017 Infiniti QX60?
The average price for Engine Parts for the 2017 Infiniti QX60 is $136.54. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Engine Parts for other Infiniti QX60 model years?
What are the cheapest Engine Parts for my 2017 Infiniti QX60?
The cheapest 2017 Infiniti QX60 Engine Parts we carry in stock are:
- Safety Stripe Standard Straight Heater Hose (Sold by foot) (10504774) – $2.99
- Fuel Injector O-Ring Kit (3504360) – $8.49
- Multi Purpose Seal (18442697) – $9.99
- RTV Silicone (12588189) – $9.99
- Engine Oil Cooler Seal (12231460) – $11.99
What are the top-rated Engine Parts that fit the 2017 Infiniti QX60?
Out of 176 reviews by customers, our 2017 Infiniti QX60 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2017 Infiniti QX60 and their top-rated products:
- Engine Gaskets and Seals
- TIMING COVER GASKET SET (15780414) – $30.99
- Valve Cover and Cylinder Heads
- TIMING COVER GASKET SET (15780414) – $30.99
What types of Engine Parts do you sell for my 2017 Infiniti QX60?
As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2017 Infiniti QX60:
Can I get help with 2017 Infiniti QX60 Engine Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Infiniti Engine Parts and more.
What is your return policy for Infiniti QX60 Engine Parts?
Advance Auto Parts keeps returns simple. For new Infiniti QX60 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
