2017 Hyundai Veloster Cooling and Climate Controls

Name: Standard Thermostat: With Seal, 180 Degrees
Brand: Carquest Premium
SKU: 15138
Price: 30.49 USD
Rating: 5.0 (2 reviews)

Below you will find various in-demand Hyundai Cooling and Climate Controls, components and accessories for your 2017 Veloster. Advance Auto Parts has popular Veloster parts like Blend Doors, Blower Motor and Related Products, Air Conditioning Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other Veloster model years including 2012, 2013, 2014, 2015, 2016, 2019, 2020, 2021 and more. Select a category of 2017 Hyundai Veloster Cooling and Climate Controls below and start saving instantly.

Popular 2017 Hyundai Veloster Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

Engine Coolant Thermostat Housing Caps

Radiator Caps

AC Compressor Without Clutch

Thermostats

Air Blend Door Actuators

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Heater Cores

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

Air Conditioning Relays

AC Condensers

Thermostat Housings

AC Receiver Drier Desiccant Elements

Thermostat Seals

ABS Speed Sensors

Temperature Switch and Senders

Water Pump Gaskets

AC Hose Assemblies

AC Clutch Cycle Switches

Expansion Valve and Orifice Tubes

AC Refrigerant Pressure Sensors

AC Compressor Relay Connectors

HVAC Pressure Transducers

Essential Cooling and Climate Controls for 2017 Hyundai Velosters

from

$30.49

Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$15.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$59.99

HVAC Door Actuators provide proper flow and blend of air in the vehicle cabin based on driver selection of refresh/recirculation, temperature and mode (Defrost/Front/Floor). HL Mando offers new OE factory Door Actuators for Hyundai, Kia and Genesis so that replacement of HVAC Door Actuators are done right first time. – We Are OE!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

from

$27.65

The Vemo Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$7.29

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

from

$118.99

The Carquest Premium line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$27.49

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$21.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$21.93

Relay

from

$82.73

The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$101.35

A/C Pressure Switch

from

$208.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$52.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$34.99

This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$114.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$279.15

Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:

All Aluminum Core and Plastic Tank
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$118.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$60.99

One of the obvious signs of a bad ABS (Anti-Lock Brake System) Sensor is of course the ABS light (trouble code) and the noticeable distance it normally takes for your vehicle to come to a safe stop. HL Mando OE ABS Sensors are not only designed to help clear that trouble code, but more importantly give you a peace of mind knowing that your ABS system can once again function precisely as designed by factory. Trust Mando brand for brake system safety as we are the original – We Are OE!

Product Features:

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Includes ABS Wheel Speed Sensor Wire Harness
Manufactured in Korea

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$228.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$56.73

A/C Hose

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Unsurpassed quality you can trust
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$17.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$384.99

HL Mando is the leading original equipment manufacturer utilizing its state-of-art technology and various quality tests to offer customers great satisfaction and safety. HL Mando is producing a variety of A/C Compressor with the latest equipment that boasts highest quality from passenger vehicles to commercial vehicles. With the state-of-the-art electronic control technology that maximizes the safety and convenience of the driver and passenger, Mando is being recognized for its high quality and supply system by world’s best automakers. In addition, obtaining ISO/TS 16949 certification proves excellent quality and reliability of suspension parts. – We Are OE!

Product Features:

Pre-filled oil in it with the correct amount of oil
Tested for Quality, Durability, and Reliability
Brand New OE- No Core Exchange Required
Direct Original Equipment Replacement

from

$23.51

The Original Equipment Thermostat Housing Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$102.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Upgrade your 2017 Hyundai Veloster with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2017 Hyundai Veloster, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Cooling and Climate Controls are key to keeping your Veloster functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Cooling and Climate Controls for the 2017 Hyundai Veloster, designed to meet your needs without breaking the bank. From Blend Door replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2017 Hyundai Veloster at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $6.79 to $488.99, with an average price of $88.85. Our 56 Cooling and Climate Controls in stock come from 20 trusted brands, so you’re sure to find the right part for your 2017 Hyundai Veloster without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Hyundai Veloster, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Carquest Premium, Motorad, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Carquest Premium and Motorad also bring quality to the table, with Cooling and Climate Controls available starting at $12.99, and at an average 4 stars rating. With 1,611 customer reviews and counting, our 2017 Hyundai Veloster Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Hyundai Veloster is always ready to roll. We’re committed to providing you with everything you need to keep your Veloster in top shape, all in one place. Start shopping confidently below for your 2017 Hyundai Veloster!

Best-Selling Blend Doors for 2017 Hyundai Velosters

Enhance the driving experience in your Hyundai with 3 quality Blend Door components, starting at $59.99.

show more show less

from

$68.99

This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC operation. Please note that many vehicles have several different air door actuators, which are designed for specific positions and functions in the vehicle. To ensure you have what you need, carefully review the application notes for this part to verify it matches the position and function of the actuator you need to replace. In some online ordering systems, you may need to enter your vehicle information first to see the application notes for your vehicle. If you don’t know which actuator position you need to replace, consult a qualified service technician.

Product Features:

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$61.99

Direct replacement – made to match the fit and function of the original air door actuator on certain vehicle years, makes, models and configurations.
Position specific – vehicles often have multiple different HVAC door actuators; review this part’s application notes to verify it matches the location and function of the actuator you need to replace.
Durable construction – designed and tested to strict standards to help resist wear and electrical burnout for reliable operation and long service life
Trustworthy quality – backed by a team of experts and engineers in the United States, and more than a century of experience

from

$59.99

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Manufactured in Korea

Most Popular 2017 Hyundai Veloster Blower Motor and Related Products

Customize your Hyundai with 5 Blower Motor and Related Products products like Blower Motors and Blower Motor Resistors, all priced under $181.78.

show more show less

from

$114.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$35.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$125.99

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$48.29

Blower Motor Resisto

from

$181.78

HVAC Blower Control

Top Picks for 2017 Hyundai Veloster Air Conditioning Parts

Upgrade Hyundai Velosters with top-quality Air Conditioning Parts parts, including 20 OEM and aftermarket selections for your 2017 model.

show more show less

from

$17.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$52.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$73.99

New Platinum Pro A/C Condenser, Veloster Up To Production Date 1/26/2016

Product Features:

Veloster Up To Production Date 1/26/2016, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$15.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$208.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$369.99

Pre-filled oil in it with the correct amount of oil
Tested for Quality, Durability, and Reliability
Brand New OE- No Core Exchange Required
Direct Original Equipment Replacement

from

$14.49

Drier Desiccant Elem

from

$488.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

from

$379.99

High quality OE replacement part with all components needed to complete the job.

Product Features:

Endurance tested the equivalent of 50k miles
Includes specific electrical connector to eliminate splicing
Charged with lubricant to reduce internal friction promoting enhanced system performance and longevity
For ease of installation this compressor includes a direct fit OE style connector as well as all gaskets, O-rings, or seals needed to repair your car

from

$294.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$228.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$118.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$101.35

A/C Pressure Switch

from

$75.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$60.99

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Includes ABS Wheel Speed Sensor Wire Harness
Manufactured in Korea

from

$60.99

Direct Original Equipment Replacement
Tested for Quality, Durability, and Reliability
Includes ABS Wheel Speed Sensor Wire Harness
Manufactured in Korea

from

$56.73

A/C Hose

from

$36.03

A/C Expansion Valve

from

$21.93

Relay

from

$12.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

In-Demand Engine Cooling Parts for 2017 Hyundai Velosters

Select from 26 premium Engine Cooling Parts parts for your 2017 Hyundai Veloster, with prices ranging from $6.79 to $279.15.

show more show less

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$28.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$119.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$30.49

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$13.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$21.99

Safety lever to vent coolant pressure before removal
Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$27.65

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$38.99

Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:

100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
Brass sensor housing precision machined to meet or exceed OE thermal conductivity
OE precision matched thermistor position for correct output parameters
Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.

from

$42.99

The Engine Coolant Temperature Sensor determines the exact temperature of the engine coolant by sending an analog signal to the ECM to censure proper air/fuel ratio along with proper operation of the cooling fan(s) and temperature gauge. The Engine Coolant Temperature Sensor may be located on the cylinder head, engine block, thermostat housing or intake manifold. Reasons for replacement include: check engine light illumination, erratic or no temperature gauge operation, erratic or no cooling fan operation, and engine overheating.

Product Features:

OE MATCHED: Wires and probe length match OE. Mounting clip(s) included where applicable
FASTER RESPONSE TIME: Thermal conductive grease inside brass housing increases sensor response time
THE NTK DIFFERENCE: Thread sealant/o-ring installed where applicable. Thermistor placement within the housing matches OE to ensure proper output. Proper thermal conductive grease to provide accurate temperature transfer to the thermistor

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$27.49

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Unsurpassed quality you can trust
Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function

from

$108.99

New Platinum Pro Radiator, Accent/Rio Models With Manual Transmission, For All Non-Turbo Velosters

Product Features:

Accent/Rio Models With Manual Transmission, For All Non-Turbo Velosters, Made Of Plastic and Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$279.15

All Aluminum Core and Plastic Tank
OE Style mounting brackets and hose connections
Integrated transmission oil cooler when applicable
Compact and lightweight

from

$219.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$187.99

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
OEM grade, premium fittings for transmission or engine oil coolers (where applicable)

from

$91.15

OE-Equivalent and direct fit application.
100% new with no remanufactured parts.
Advanced technological design.
Carbon ceramic sealing.
Resistant to corrosion.
Optimum cooling performance and longevity.

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$34.99

Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings

from

$23.51

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$22.99

This radiator cap is designed to match the fit and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this radiator cap is designed to match the fit and function of the original cap on specified vehicles.
Restores functionality – reliable replacement for an original cap that is missing, leaking or failed due to gasket fatigue and heat
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.57

CALORSTAT thermostatic components (bellows thermostats for water temperature regulation), followed by the use of a different technology based on the wax expansion. CALORSTAT by Vernet has produced thermostatic elements for more than 50 years. A vast amount of experience and continuous development has enabled the Company to remain the world leader in this field. Throughout the world, Vernet is regarded as a valued partner by manufacturers, large and small, in the Sanitary, Heating and Automotive industry.

Product Features:

Comfort enhancement by a faster cabine warming
CO2 emissions and fuel consumption reduction
Thermostat opening driven by the ECU (electrical thermostat)
An adaptation of the control strategies to the vehicle use (electrical thermostat)

from

$11.04

Radiator Cap

from

$7.49

WATER TEMP. SENSOR

from

$7.29

Cracked or lost the original engine coolant reservoir cap? Replace it seamlessly and effectively with this precisely engineered, direct replacement cap.

Product Features:

Direct replacement – this engine coolant reservoir cap directly replaces a cracked or lost original cap.
Application specific – made to match dimensions of reservoir cap on only certain vehicle years, makes and models
Seamless fit – reverse-engineered from the original equipment to fit perfectly
Excellent value – a quick, easy replacement that’s less expensive than going back to the dealership

Most Sold 2017 Hyundai Veloster Heating Parts

Explore our best-selling Hyundai parts for the 2017 Veloster among 2 OEM and aftermarket options starting from $102.99.

show more show less

from

$102.99

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

from

$118.99

High quality OE replacement part with all components needed to complete the job

Product Features:

Contains gaskets, O-rings, or seals to properly replace the product
Color coded for easy identification
Zinc coated to resist corrosion
Vehicle specific applications

Top-Rated Cooling and Climate Controls Brands For Your 2017 Hyundai Veloster

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2017 Hyundai Velosters. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Carquest Premium, and Motorad, and more. Cooling and Climate Controls from these brands that fit a 2017 Veloster start at just $6.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2017 Hyundai Veloster Cooling and Climate Controls

When it comes to maintaining or upgrading your 2017 Hyundai Veloster, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2017 Hyundai Veloster. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular Carquest Premium 2017 Hyundai Veloster Cooling and Climate Controls

Carquest Premium auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2017 Hyundai Veloster owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2017 Veloster, Advance Auto Parts carries a full inventory of 21 Carquest Premium Cooling and Climate Controls. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these Carquest Premium Cooling and Climate Controls range from $12.99 to $379.99, plus, with more than 240 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$38.99

This product is not rated

Coolant Temperature Sensor with Thread Sealant

“”

from
$17.99

This product is not rated

A/C Desiccant Bag Kit

“”

from
$52.99

This product is not rated

A/C Compressor Relay Connector

“”

FAQs for 2017 Hyundai Veloster Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2017 Hyundai Velosters?

Out of 56 Cooling and Climate Controls that fit 2017 Hyundai Velosters, the following parts are the top sellers:

Radiator Cap: 16 PSI (17110021) – $13.99
Radiator Cap: 16 PSI (17110039) – $21.99
Coolant Temperature Sensor with Thread Sealant (12422731) – $38.99

What’s the price range for 2017 Hyundai Veloster Cooling and Climate Controls?

Cooling and Climate Control prices for the 2017 Hyundai Veloster start at $6.79 and go up to $488.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2017 Hyundai Veloster?

The average price for Cooling and Climate Controls for the 2017 Hyundai Veloster is $88.85. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Hyundai Veloster model years?

Yes, we currently carry Cooling and Climate Controls for 8 model years of Hyundai Velosters between 2012 and 2021. Cooling and Climate Controls are bought most frequently for the following model years: 2021, 2020, 2019, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Cooling and Climate Controls for my 2017 Hyundai Veloster?

The cheapest 2017 Hyundai Veloster Cooling and Climate Controls we carry in stock are:

Engine Water Pump Gasket (10942923) – $6.79
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (7160009) – $6.99
Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack (12139897) – $7.29
WATER TEMP. SENSOR (50222456) – $7.49
Engine Water Pump Gasket (11401883) – $7.99

What are the top-rated Cooling and Climate Controls that fit the 2017 Hyundai Veloster?

Out of 1,611 reviews by customers, our 2017 Hyundai Veloster Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2017 Hyundai Veloster and their top-rated products:

Engine Cooling Parts
- Standard Thermostat: With Seal, 180 Degrees (11357664) – $28.99
- Engine Water Pump: New, Gasket/Seals Included (10244920) – $119.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99
Blower Motor and Related Products
- Standard Thermostat: With Seal, 180 Degrees (11357664) – $28.99
- Engine Water Pump: New, Gasket/Seals Included (10244920) – $119.99
- High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (7160239) – $26.99

What types of Cooling and Climate Controls do you sell for my 2017 Hyundai Veloster?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2017 Hyundai Veloster:

Can I get help with 2017 Hyundai Veloster Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Cooling and Climate Controls and more.

What is your return policy for Hyundai Veloster Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Hyundai Veloster Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2017 Hyundai Veloster Cooling and Climate Controls

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.15138)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39470)

MANDO – HVAC Door Actuator Original Equipment 971543Z000 (Part No.30A1110)

Vemo – Engine Coolant Temperature Sensor (Part No.C6020109494VMO)

Dorman – Help – Engine Coolant Reservoir Cap: Twist, Plastic/Rubber, 1 Pack (Part No.54018)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1746)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10326)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Vemo – Relay (Part No.P2020411624VMO)

AISIN – OE Replacement Water Pump (Part No.G3000573426ASC)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Santech – A/C Pressure Switch (Part No.R1054414178SII)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714438)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-5196)

Carquest Premium – Blower Motor: With Wheel (Part No.75875)

Koyo Cooling – Koyo Cooling Radiator (Part No.G1000478688KCS)

Factory Air – System Mounted Pressure Transducer (Part No.37324)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

MANDO – New ABS Wheel Speed Sensor Original Equipment (Part No.25A5090)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714246)

Original Equipment – A/C Hose (Part No.R1020445538OEA)

Felpro – Engine Water Pump Gasket (Part No.36004)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T8807802)

MANDO – OE AC Compressor w/ Clutch & Pre-filled Oil (Part No.10A1402)

Original Equipment – Thermostat Housing Cover (Part No.G4011415108OEA)

Carquest Premium – Heater Core (Part No.910574)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-330)

Dorman – HVAC Blend Door Actuator: 1 Piece (Part No.604-329)

MANDO – HVAC Door Actuator Original Equipment 971543Z000 (Part No.30A1110)

Carquest Premium – Blower Motor: With Wheel (Part No.75875)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1306)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1352)

ACKOJA – Blower Motor Resisto (Part No.R2032434200ACK)

ACKOJA – HVAC Blower Control (Part No.R2005439095ACK)

Carquest Premium – A/C Desiccant Bag Kit (Part No.T8807802)

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

KAI – A/C Condenser (Part No.CND4438)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39470)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714438)

MANDO – New AC Compressor Original Equipment (Pre-filled Oil) (Part No.10A1471)

Santech – Drier Desiccant Elem (Part No.R1043389991SII)

DENSO – New A/C Compressor (Part No.471-6086)

Carquest Premium – New Compressor with Clutch, Halla HCC-DV13 (Part No.T168351)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2116)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714246)

Carquest Premium – A/C Refrigerant Pressure Sensor (Part No.ACA1746)

Santech – A/C Pressure Switch (Part No.R1054414178SII)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA4048)

MANDO – New ABS Wheel Speed Sensor Original Equipment (Part No.25A5090)

MANDO – New ABS Wheel Speed Sensor Original Equipment (Part No.25A5089)

Original Equipment – A/C Hose (Part No.R1020445538OEA)

Santech – A/C Expansion Valve (Part No.R10451078197SII)

Vemo – Relay (Part No.P2020411624VMO)

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T39453)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Motorad – Standard Thermostat: With Seal, 180 Degrees (Part No.726-180)

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1197)

Carquest Premium – Standard Thermostat: With Seal, 180 Degrees (Part No.15138)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10233)

Carquest Premium – Radiator Cap: 16 PSI (Part No.10333)

Vemo – Engine Coolant Temperature Sensor (Part No.C6020109494VMO)

Carquest Premium – Coolant Temperature Sensor with Thread Sealant (Part No.WTC1019)

NTK – Engine Coolant Temperature Sensor (Part No.EF0112)

Felpro – Engine Water Pump Gasket (Part No.36003)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10326)

Felpro – Engine Water Pump Gasket (Part No.36004)

KAI – Radiator (Part No.RAD13252)

Koyo Cooling – Koyo Cooling Radiator (Part No.G1000478688KCS)

Carquest Premium – Radiator (Part No.813252)

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.813415)

AISIN – OE Replacement Water Pump (Part No.G3000409867ASC)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Dorman – Coolant Housing/Water Outlet: With Housing (Part No.902-5196)

Original Equipment – Thermostat Housing Cover (Part No.G4011415108OEA)

Dorman – Help – Radiator Cap (Part No.54237)

Calorstat – Thermostat (Part No.G4000406491CAL)