2017 GMC Sierra 3500 HD Engine Parts

Please Select your Vehicle to See Exact Fit Parts

Popular 2017 GMC Sierra 3500 HD Engine Parts Categories

Essential Engine Parts for 2017 GMC Sierra 3500 HDs

Dorman – Help – Dorman – Help Engine Oil Dipstick Tube: Direct Replacement, Steel, 917-433 (Part No.917-433)

Dorman - Help Engine Oil Dipstick Tube: Direct Replacement, Steel, 917-433

from

$25.99
This engine oil dipstick tube is designed to match the fit and function of the original tube on specified vehicles, and is engineered for durability and reliable performance.
See More

Cloyes Performance – Cloyes Performance High Performance Timing Set, 9-3158AZ-5 (Part No.9-3158AZ-5)

Cloyes Performance High Performance Timing Set, 9-3158AZ-5

from

$372.99
“HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “”Z”” Chain TRUE Roller 0.250″” Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.”
See More

PowerBond – PowerBond Diesel Performance Race Harmonic Balancer 198mm Diameter, PB1649DP (Part No.PB1649DP)

PowerBond Diesel Performance Race Harmonic Balancer 198mm Diameter, PB1649DP

from

$493.99
For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.
See More

Carquest Premium – Carquest Automatic Transmission Fluid Temperature Sensor, SBE2079 (Part No.SBE2079)

Carquest Automatic Transmission Fluid Temperature Sensor, SBE2079

from

$111.99
The Automatic Transmission Fluid Temperature Sensor provides an input to the transmission control module as to the operating temperature of the automatic transmission fluid under the many operating conditions. The transmission control module will provide the transmission hydraulic circuits the optimal fluid pressure for current temperature conditions.
See More

Felpro – Felpro Engine Cylinder Head Bolt Set, ES 72390 (Part No.ES 72390)

Felpro Engine Cylinder Head Bolt Set, ES 72390

from

$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

GM Genuine Parts – GM Genuine Parts Engine Oil Pressure Relief Valve Deflector, 12639759 (Part No.12639759)

GM Genuine Parts Engine Oil Pressure Relief Valve Deflector, 12639759

from

$6.99
GM Genuine Parts Engine Oil Pressure Relief Valve Deflectors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These deflectors help guide oil away from components inside your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

GM Genuine Parts – GM Genuine Parts Camshaft Position Sensor, 213-3826 (Part No.213-3826)

GM Genuine Parts Camshaft Position Sensor, 213-3826

from

$74.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Felpro – Felpro Engine Valve Cover Grommet Set, ES 72233 (Part No.ES 72233)

Felpro Engine Valve Cover Grommet Set, ES 72233

from

$24.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

GM Genuine Parts – GM Genuine Parts Gen III/IV Lifter Guide, 12595365 (Part No.12595365)

GM Genuine Parts Gen III/IV Lifter Guide, 12595365

from

$15.79
GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

GM Genuine Parts – GM Genuine Parts Engine Variable Valve Timing (VVT) Adjuster Magnet, 12653140 (Part No.12653140)

GM Genuine Parts Engine Variable Valve Timing (VVT) Adjuster Magnet, 12653140

from

$63.99
ACDelco GM Original Equipment Camshaft Magnets regulate the position of camshaft phasers, and are GM-recommended replacements for your vehicle’s original components. These original equipment camshaft magnets have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Competition Cams – "Competition Cams Flat 1 Piece Guide Plate Set Gm Ls With 5/16"" Pushrod And 8Mm Stud, 4854-8" (Part No.4854-8)

"Competition Cams Flat 1 Piece Guide Plate Set Gm Ls With 5/16"" Pushrod And 8Mm Stud, 4854-8"

from

$33.99
“Competition Cams Flat 1 Piece Guide Plate Set Gm Ls With 5/16″” Pushrod And 8Mm Stud, 4854-8. ”
See More

Sealed Power – Sealed Power Engine Connecting Rod Bearing Set, 8-2555A 20 (Part No.8-2555A 20)

Sealed Power Engine Connecting Rod Bearing Set, 8-2555A 20

from

$82.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 26401 PT (Part No.26401 PT)

Felpro PermaTorque Engine Cylinder Head Gasket, 26401 PT

from

$105.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Felpro – Felpro Engine Crankshaft Seal Kit, TCS 46193 (Part No.TCS 46193)

Felpro Engine Crankshaft Seal Kit, TCS 46193

from

$42.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Rotomaster – Rotomaster, K1055101N (Part No.K1055101N)

Rotomaster, K1055101N

from

$75.99
The Rotomaster Turbocharger Oil Lines supports proper turbocharger lubrication by maintaining consistent oil flow to and from the turbocharger. Built for high-heat environments, it helps protect turbo bearings and seals while reducing the risk of oil-related failures.
See More

Victor Reinz – Victor Reinz Engine Camshaft Retainer Plate, 71-17533-00 (Part No.71-17533-00)

Victor Reinz Engine Camshaft Retainer Plate, 71-17533-00

from

$29.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More

Melling – Melling Engine Oil Strainer Gasket Set, M29517 (Part No.M29517)

Melling Engine Oil Strainer Gasket Set, M29517

from

$3.99
Made In USA. Installing an oil pump screen can often cause damage to the protective gaskets and O Rings if the screen assembly is not properly installed. In the event that the original seals are damaged or accidently discarded Melling offers a replacement gasket set for oil pump screen installations covering the LS oil pumps. Each package conveniently contains both replacement O Rings needed to complete the oil pump screen installation. These gasket sets can be used for the M295, M295HV, M355, M365, 10295, 10296 and 10355 oil pumps.
See More

Melling – Melling Engine Oil Priming Tool, MPL-201 (Part No.MPL-201)

Melling Engine Oil Priming Tool, MPL-201

from

$383.99
Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.
See More

Melling – Melling Stock Replacement Oil Pump Screen, 395S (Part No.395S)

Melling Stock Replacement Oil Pump Screen, 395S

from

$65.99
A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.
See More

Melling Select Performance – Melling Select Performance High Performance High Pressure Cast Aluminum Oil Pump, 10295 (Part No.10295)

Melling Select Performance High Performance High Pressure Cast Aluminum Oil Pump, 10295

from

$166.99
Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling 10295 high performance oil pump is a high pressure, standard volume upgrade of the M295. The cast aluminum housing is CNC machined and hardcoat anodized. The cast iron cover is CNC machined and phosphate coated for improved pump performance and durability. The relief valve features a screw in valve plug with the optional lower stock pressure spring supplied. The oil pump and screen seals are included. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions.
See More

Sealed Power – Sealed Power Engine Camshaft Bearing Set, 1933M (Part No.1933M)

Sealed Power Engine Camshaft Bearing Set, 1933M

from

$154.99
Sealed Power® parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Anchor – Anchor Engine Mount Front Right, Front Left, 2909 (Part No.2909)

Anchor Engine Mount Front Right, Front Left, 2909

from

$53.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to CADI 02-06; CHEV 99-19; GMC 99-13; HUMMER 03-09;. Please verify your application.
See More

aFe POWER – aFe POWER Engine Oil Pan, 46-70342 (Part No.46-70342)

aFe POWER Engine Oil Pan, 46-70342

from

$429.99
aFe Power’s new engine oil pan brings performance engineering to the protection of your GM Silverado/Sierra HD with Duramax turbo diesel engines. This oil pan is constructed out of durable A356 cast aluminum with machined fins for maximum strength and styling. This cover incorporates a magnetic drain plug to capture loose particles for maximum engine protection. All necessary hardware is included for a hassle-free installation. Built-in External and Internal Fins: Built-in External and Internal fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain Plug: This system incorporates a magnetic drain plug that captures loose particles for maximum engine protection. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.
See More

Crankshaft Oil Seal Housing Gasket, 12639249

from

$51.99
GM Genuine Parts Engine Crankshaft Seal Retainer Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

Dorman – Dorman Variable Timing Oil Control Valve, 916-865 (Part No.916-865)

Dorman Variable Timing Oil Control Valve, 916-865

from

$48.99
This replacement VVT oil control valve is a direct replacement for a worn or leaking original equipment valve. Made of quality materials for durability, this part has been tested to ensure a proper fit.
See More

Sealed Power – Sealed Power Engine Connecting Rod Bearing Set, 8-2555CP 30 (Part No.8-2555CP 30)

Sealed Power Engine Connecting Rod Bearing Set, 8-2555CP 30

from

$78.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Cloyes Gear – Cloyes Gear Engine Timing Crankshaft Sprocket, S827 (Part No.S827)

Cloyes Gear Engine Timing Crankshaft Sprocket, S827

from

$28.99
Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.
See More

Dorman – Dorman Turbocharger Vane Position Sensor, 904-235 (Part No.904-235)

Dorman Turbocharger Vane Position Sensor, 904-235

from

$218.99
This turbocharger vane position sensor matches the function of the original equipment sensor to restore the engine management system’s ability to determine the position of the vanes on a variable geometry turbocharger.
See More

Upgrade your 2017 GMC Sierra 3500 HD with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2017 GMC Sierra 3500 HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your Sierra 3500 HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 210 Engine Parts for the 2017 GMC Sierra 3500 HD, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2017 GMC Sierra 3500 HD at great prices. Our Engine Parts inventory for this model ranges from just $0.99 to $4,791.00, with an average price of $179.47. Our 210 Engine Parts in stock come from 24 trusted brands, so you’re sure to find the right part for your 2017 GMC Sierra 3500 HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 GMC Sierra 3500 HD, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Sealed Power, Dorman, and more. Felpro Engine Parts start at just $6.99 and boast an impressive 4.6 stars average rating from customers. Sealed Power and Dorman also bring quality to the table, with Engine Parts available starting at $6.29, and at an average 4.4 stars rating. With 3,744 customer reviews and counting, our 2017 GMC Sierra 3500 HD Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 GMC Sierra 3500 HD is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 3500 HD in top shape, all in one place. Start shopping confidently below for your 2017 GMC Sierra 3500 HD!

Best-Selling Engine Gaskets and Seals for 2017 GMC Sierra 3500 HDs

Enhance the driving experience in your GMC with 27 quality Engine Gaskets and Seal components, starting at $3.99.

Felpro – Felpro Engine Oil Pan Gasket Set – PermaDry molded rubber, OS 30693 R (Part No.OS 30693 R)

Felpro Engine Oil Pan Gasket Set - PermaDry molded rubber, OS 30693 R

from

$74.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 45993 (Part No.TCS 45993)

Felpro Engine Timing Cover Gasket Set, TCS 45993

from

$55.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Dorman – Dorman Main Seal Cover Kit, 635-518 (Part No.635-518)

Dorman Main Seal Cover Kit, 635-518

from

$84.99
This direct replacement rear main seal cover kit matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.
See More

National – National Engine Crankshaft Seal, 100085 (Part No.100085)

National Engine Crankshaft Seal, 100085

from

$29.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Felpro – Felpro Engine Coolant Crossover Pipe Mounting Set, ES 73027 (Part No.ES 73027)

Felpro Engine Coolant Crossover Pipe Mounting Set, ES 73027

from

$22.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Felpro – Felpro Engine Valve Cover Gasket Set, VS 50504 R-1 (Part No.VS 50504 R-1)

Felpro Engine Valve Cover Gasket Set, VS 50504 R-1

from

$40.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Felpro – Felpro Engine Oil Cooler Gasket, 72462 (Part No.72462)

Felpro Engine Oil Cooler Gasket, 72462

from

$13.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Felpro – Felpro Engine Oil Cooler Gasket, 72435 (Part No.72435)

Felpro Engine Oil Cooler Gasket, 72435

from

$7.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Felpro – Felpro Engine Valve Stem Oil Seal Set, SS 71039 (Part No.SS 71039)

Felpro Engine Valve Stem Oil Seal Set, SS 71039

from

$40.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

GM Genuine Parts – GM Genuine Parts Oil Pan Gasket, 12612350 (Part No.12612350)

GM Genuine Parts Oil Pan Gasket, 12612350

from

$74.99
GM Genuine Parts Engine Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

Felpro – Felpro Engine Oil Filler Cap Seal, 73193 (Part No.73193)

Felpro Engine Oil Filler Cap Seal, 73193

from

$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Dorman – Help – Dorman – Help Oil Cooler Line Gasket, 66218 (Part No.66218)

Dorman - Help Oil Cooler Line Gasket, 66218

from

$12.49
This oil cooler gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
See More

GM Genuine Parts – GM Genuine Parts Oil Pan Cover Gasket: Nitrile Coated SS, 12611384 (Part No.12611384)

GM Genuine Parts Oil Pan Cover Gasket: Nitrile Coated SS, 12611384

from

$9.99
GM Genuine Parts Engine Oil Pan Cover Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

Felpro – Felpro Engine Crankshaft Seal Kit, BS 40683 (Part No.BS 40683)

Felpro Engine Crankshaft Seal Kit, BS 40683

from

$53.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Felpro – Felpro Engine Conversion Gasket Set, CS 9284 (Part No.CS 9284)

Felpro Engine Conversion Gasket Set, CS 9284

from

$219.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 45055 (Part No.TCS 45055)

Felpro Engine Timing Cover Gasket Set, TCS 45055

from

$89.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Carquest Premium – Carquest Automatic Transmission Fluid Temperature Sensor, SBE2079 (Part No.SBE2079)

Carquest Automatic Transmission Fluid Temperature Sensor, SBE2079

from

$111.99
The Automatic Transmission Fluid Temperature Sensor provides an input to the transmission control module as to the operating temperature of the automatic transmission fluid under the many operating conditions. The transmission control module will provide the transmission hydraulic circuits the optimal fluid pressure for current temperature conditions.
See More

Dorman – Dorman Camshaft Position Sensor, 917-744 (Part No.917-744)

Dorman Camshaft Position Sensor, 917-744

from

$42.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
See More

Felpro – Felpro Engine Conversion Gasket Set, CS 9284-1 (Part No.CS 9284-1)

Felpro Engine Conversion Gasket Set, CS 9284-1

from

$318.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Dorman – Dorman Silicone Valve Cover Gasket Set: Exact Fit, 2 Pieces, 904-380 (Part No.904-380)

Dorman Silicone Valve Cover Gasket Set: Exact Fit, 2 Pieces, 904-380

from

$101.99
This valve cover gasket is designed to match the fit, function and performance of an original equipment gasket on specified vehicles. Made of durable materials, it is engineered to help ensure a long-lasting seal under extreme underhood conditions.
See More

Victor Reinz – Victor Reinz Engine Oil Pan Gasket Set for GM 5.3L, 5.7L, 6.0L, and 6.2L V8,Engine Oil Pan Gasket Set, 10-10223-01 (Part No.10-10223-01)

Victor Reinz Engine Oil Pan Gasket Set for GM 5.3L, 5.7L, 6.0L, and 6.2L V8,Engine Oil Pan Gasket Set, 10-10223-01

from

$80.99
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.
See More

Felpro – Felpro Engine Timing Cover Gasket Set, TCS 45993-1 (Part No.TCS 45993-1)

Felpro Engine Timing Cover Gasket Set, TCS 45993-1

from

$74.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Crankshaft Oil Seal Housing Gasket, 12639249

from

$51.99
GM Genuine Parts Engine Crankshaft Seal Retainer Gasket are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

Victor Reinz – Victor Reinz Engine Oil Pan Gasket Set, 10-10318-01 (Part No.10-10318-01)

Victor Reinz Engine Oil Pan Gasket Set, 10-10318-01

from

$42.99
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.
See More

Most Popular 2017 GMC Sierra 3500 HD Camshafts

Customize your GMC with 22 Camshafts products like Camshaft Position Sensors, Camshaft Followers, and Camshaft Seals, all priced under $541.99.

GM Genuine Parts – GM Genuine Parts Camshaft Position Sensor, 213-3826 (Part No.213-3826)

GM Genuine Parts Camshaft Position Sensor, 213-3826

from

$74.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Carquest Premium – Carquest Camshaft Sensor, CSC1054 (Part No.CSC1054)

Carquest Camshaft Sensor, CSC1054

from

$45.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.
See More

NTK – NTK Engine Camshaft Position Sensor, EC0321 (Part No.EC0321)

NTK Engine Camshaft Position Sensor, EC0321

from

$54.99
The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.
See More

Sealed Power – Sealed Power Engine Camshaft Bearing Set, 1923M (Part No.1923M)

Sealed Power Engine Camshaft Bearing Set, 1923M

from

$61.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

GM Genuine Parts – GM Genuine Parts Engine Camshaft Position Sensor, 12636947 (Part No.12636947)

GM Genuine Parts Engine Camshaft Position Sensor, 12636947

from

$42.99
ACDelco GM Original Equipment Engine Camshaft Position Sensors monitor the rotational position of the camshaft(s), and are GM-recommended replacements for your vehicle’s original components. They provide a signal to the engine control module which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. These original equipment engine camshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Dorman – Dorman Variable Valve Timing Solenoid (OE Fix), 916-886XD (Part No.916-886XD)

Dorman Variable Valve Timing Solenoid (OE Fix), 916-886XD

from

$63.99
The original variable valve timing (VVT) solenoid on certain GM and Isuzu vehicles can fail from debris, mishandling during maintenance or harsh operating conditions. This Dorman OE FIX VVT solenoid features multiple improvements, including a patented, upgraded copper core and additional oil passages to eliminate internal movement and extend service life.
See More

Carquest Premium – Carquest Engine Variable Valve Timing (VVT) Solenoid, VVA1053 (Part No.VVA1053)

Carquest Engine Variable Valve Timing (VVT) Solenoid, VVA1053

from

$63.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
See More

GM Genuine Parts – GM Genuine Parts Engine Variable Valve Timing (VVT) Adjuster Magnet, 12653140 (Part No.12653140)

GM Genuine Parts Engine Variable Valve Timing (VVT) Adjuster Magnet, 12653140

from

$63.99
ACDelco GM Original Equipment Camshaft Magnets regulate the position of camshaft phasers, and are GM-recommended replacements for your vehicle’s original components. These original equipment camshaft magnets have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Felpro – Felpro Engine Camshaft Thrust Plate, ES 73115 (Part No.ES 73115)

Felpro Engine Camshaft Thrust Plate, ES 73115

from

$43.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Dorman – Dorman Cam Position Sensor Connector, 645-526 (Part No.645-526)

Dorman Cam Position Sensor Connector, 645-526

from

$39.99
This engine camshaft position sensor connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
See More

Competition Cams – Competition Cams XFI XE-R 232/234 Hydraulic Roller Cam, 54-446-11 (Part No.54-446-11)

Competition Cams XFI XE-R 232/234 Hydraulic Roller Cam, 54-446-11

from

$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
See More

Competition Cams – Competition Cams XFI RPM 212/218 Hydraulic Roller Cam, 54-412-11 (Part No.54-412-11)

Competition Cams XFI RPM 212/218 Hydraulic Roller Cam, 54-412-11

from

$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
See More

Competition Cams – Competition Cams XFI RPM 216/220 Hydraulic Roller Cam, 54-414-11 (Part No.54-414-11)

Competition Cams XFI RPM 216/220 Hydraulic Roller Cam, 54-414-11

from

$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
See More

Sealed Power – Sealed Power Engine Camshaft Bearing Set, 1933M (Part No.1933M)

Sealed Power Engine Camshaft Bearing Set, 1933M

from

$154.99
Sealed Power® parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Dorman – Dorman Variable Timing Oil Control Valve, 916-865 (Part No.916-865)

Dorman Variable Timing Oil Control Valve, 916-865

from

$48.99
This replacement VVT oil control valve is a direct replacement for a worn or leaking original equipment valve. Made of quality materials for durability, this part has been tested to ensure a proper fit.
See More

Victor Reinz – Victor Reinz Engine Camshaft Seal, 71-18369-00 (Part No.71-18369-00)

Victor Reinz Engine Camshaft Seal, 71-18369-00

from

$48.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More

Schaeffler – Schaeffler Shaft Seal, SS3405 (Part No.SS3405)

Schaeffler Shaft Seal, SS3405

from

$45.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
See More

Competition Cams – Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6, 875-1 (Part No.875-1)

Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for '87+ SBC, LT/LS and V6, 875-1

from

$44.99
Competition Cams Reduced Travel OE-Style Hydraulic Roller Lifter for ’87+ SBC, LT/LS and V6, 875-1.
See More

Carquest Premium – Carquest Engine Camshaft Position Sensor, CSA4435 (Part No.CSA4435)

Carquest Engine Camshaft Position Sensor, CSA4435

from

$38.49
Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
See More

Victor Reinz – Victor Reinz Engine Camshaft Retainer Plate, 71-17533-00 (Part No.71-17533-00)

Victor Reinz Engine Camshaft Retainer Plate, 71-17533-00

from

$29.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More

Victor Reinz – Victor Reinz Engine Camshaft Position Sensor O-Ring, 71-14601-00 (Part No.71-14601-00)

Victor Reinz Engine Camshaft Position Sensor O-Ring, 71-14601-00

from

$13.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
See More

Melling – Melling Stock Replacement Engine Assembly Lubricant, 4 oz., M-10012 (Part No.M-10012)

Melling Stock Replacement Engine Assembly Lubricant, 4 oz., M-10012

from

$5.89
Made In USA. 4 oz. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.
See More

Top Picks for 2017 GMC Sierra 3500 HD Valve Cover and Cylinder Heads

Upgrade GMC Sierra 3500 HDs with top-quality Valve Cover and Cylinder Heads parts, including 50 OEM and aftermarket selections for your 2017 model.

Dorman – Dorman Valve Covers: with Gasket, Direct Replacement, Aluminum, 264-969 (Part No.264-969)

Dorman Valve Covers: with Gasket, Direct Replacement, Aluminum, 264-969

from

$105.99
This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
See More

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket, 26192 PT (Part No.26192 PT)

Felpro PermaTorque Engine Cylinder Head Gasket, 26192 PT

from

$94.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Felpro – Felpro Engine Cylinder Head Bolt Set, ES 72390 (Part No.ES 72390)

Felpro Engine Cylinder Head Bolt Set, ES 72390

from

$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
See More

Sealed Power – Sealed Power Engine Valve Lifter, HT-2148 (Part No.HT-2148)

Sealed Power Engine Valve Lifter, HT-2148

from

$14.49
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More

Sealed Power – Sealed Power Engine Valve Lifter, HT-2148A (Part No.HT-2148A)

Sealed Power Engine Valve Lifter, HT-2148A

from

$28.49
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More

GM Genuine Parts – GM Genuine Parts Gen III/IV Lifter Guide, 12595365 (Part No.12595365)

GM Genuine Parts Gen III/IV Lifter Guide, 12595365

from

$15.79
GM Genuine Parts Engine Valve Lifter Guide are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

Felpro – Felpro Engine Valve Cover Grommet Set, ES 72233 (Part No.ES 72233)

Felpro Engine Valve Cover Grommet Set, ES 72233

from

$24.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Felpro – Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 26192 PT-5 (Part No.HS 26192 PT-5)

Felpro PermaTorque Engine Cylinder Head Gasket Set, HS 26192 PT-5

from

$249.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Polished, 241-181 (Part No.241-181)

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Polished, 241-181

from

$956.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a vintage style finned overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simplified version of our Vintage Series style fins that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14″” round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover – Gen III/IV LS – Polished, 241-176" (Part No.241-176)

"Holley 2-Piece ""Chevrolet"" Script Valve Cover - Gen III/IV LS - Polished, 241-176"

from

$868.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a “”Chevrolet”” branded overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a prominent vintage “”Chevrolet”” logo that matches various other GM licensed Holley products. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Natural, 241-180 (Part No.241-180)

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Natural, 241-180

from

$843.99
Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers will be offered in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins). Polished and black versions coming soon.
See More

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover – Gen III/IV LS – Natural, 241-175" (Part No.241-175)

"Holley 2-Piece ""Chevrolet"" Script Valve Cover - Gen III/IV LS - Natural, 241-175"

from

$762.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a “”Chevrolet”” branded overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a prominent vintage “”Chevrolet”” logo that matches various other GM licensed Holley products. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Satin Black Machined, 241-182 (Part No.241-182)

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Satin Black Machined, 241-182

from

$762.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a vintage style finned overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simplified version of our Vintage Series style fins that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14″” round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – Holley 2-Piece Cast Aluminum Valve Covers, Satin Black Finish, 241-172 (Part No.241-172)

Holley 2-Piece Cast Aluminum Valve Covers, Satin Black Finish, 241-172

from

$749.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a vintage finned overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features our Vintage Series style fins with a script Holley logo that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14″” round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-178" (Part No.241-178)

"Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-178"

from

$731.99
Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers are available in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins).
See More

Holley – "Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-179" (Part No.241-179)

"Holley 2-Piece ""Chevrolet"" Script Valve Cover, 241-179"

from

$731.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a “”Chevrolet”” branded overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a prominent vintage “”Chevrolet”” logo that matches various other GM licensed Holley products. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Gloss Red Machined, 241-184 (Part No.241-184)

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Gloss Red Machined, 241-184

from

$709.99
Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers will be offered in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins). Polished and black versions coming soon.
See More

Holley – Holley 2-Piece Finned Valve Cover – Gen III/IV LS – Factory Orange Machined, 241-183 (Part No.241-183)

Holley 2-Piece Finned Valve Cover - Gen III/IV LS - Factory Orange Machined, 241-183

from

$672.99
“Holley’s new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies (coils not included), and a vintage style finned overcover that hides the unsightly LS coils and messy wiring harness – allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simplified version of our Vintage Series style fins that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14″” round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.”
See More

Holley – Holley LS Valve Covers – Polished, 241-90 (Part No.241-90)

Holley LS Valve Covers - Polished, 241-90

from

$562.99
“Holley’s cast aluminum valve covers for GM LS engines provide a fresh, refined look without the need to relocate the coils. There’s no question the factory “”coil on cover”” design gives the LS that signature high-tech look, but the factory brackets and coil location leave room for improvement. Clean up that signature look with Holley’s LS Valve Covers! They incorporate a radiused shape, angled coil mounting, and a billet fill cap. Plus, the coils mount directly to the cover with no need for a bracket in-between. They fit most popular LS series engines and come in Black Krinkle, Satin, Natural Cast, and Polished. Or, paint to match your vehicle’s theme!”
See More

Holley – Holley Tall LS Valve Cover with Bowtie/Chevrolet Logo – Gloss Red Machined Finish, 241-404 (Part No.241-404)

Holley Tall LS Valve Cover with Bowtie/Chevrolet Logo - Gloss Red Machined Finish, 241-404

from

$545.99
Based on our existing tall LS valve covers, the GM Licensed Tall LS valve covers eliminate the factory coil-on-cover look and instead feature prominent, cast-in graphics that are sure to dress up your engine bay and represent your loyalty to your favorite OEM brand.
See More

Holley – Holley GM Tall LS Bowtie/Chevrolet Valve Cover, 241-402 (Part No.241-402)

Holley GM Tall LS Bowtie/Chevrolet Valve Cover, 241-402

from

$519.99
The new GM Licensed Tall LS valve covers are available in five unique finishes to best fit your style: natural cast, polished, satin black, factory orange, and gloss red (all finishes have a precision machined logo surface aside from the polished version).
See More

Top Street Performance – Top Street Performance GM LS V8 (4.8L-7.0L) Chrome Cast Aluminum Valve Covers with Smooth Coil Covers, JM8082-3P (Part No.JM8082-3P)

Top Street Performance GM LS V8 (4.8L-7.0L) Chrome Cast Aluminum Valve Covers with Smooth Coil Covers, JM8082-3P

from

$499.99
Let’s face it, nobody wants an ugly set of ignition coils sitting atop their newly dressed up engine. You can take the time and effort to relocate them or you get a set of TSP’s two-piece valve covers. The base has a tall internal height to allow for added valvetrain clearance and features provisions for mounting two of the most popular LS coil packs – no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a smooth top.
See More

Top Street Performance – Top Street Performance GM LS Polished Finned Aluminum 2,Piece Valve Covers with Coil Mounts and Covers, JM8082-2P (Part No.JM8082-2P)

Top Street Performance GM LS Polished Finned Aluminum 2,Piece Valve Covers with Coil Mounts and Covers, JM8082-2P

from

$499.99
Let’s face it, nobody wants an ugly set of ignition coils sitting atop their newly dressed up engine. You can take the time and effort to relocate them or you get a set of TSP’s two,piece valve covers. The base has a tall internal height to allow for added valvetrain clearance and features provisions for mounting two of the most popular LS coil packs , no brackets required. It also features a baffled stock,style ventilation set,up. The coil cover features cut,outs for routing the wiring harness and spark plug wires and comes with a classic, finned top.
See More

Holley – Holley GM Tall LS Valve Cover – LSX Logo, 241-407 (Part No.241-407)

Holley GM Tall LS Valve Cover - LSX Logo, 241-407

from

$474.99
“These valve covers feature an additional 0.54″” of internal clearance over factory height LS valve covers, allowing for additional valve train clearance and adding a subtle muscular touch. The GM Licensed Tall LS valve covers were designed to fit LS1, LS2, LS3, LS6 and LS7 engines. These valve covers come ready for installation with an OE style baffle and ventilation system, lengthened factory style mounting hardware, and a billet aluminum oil fill cap.”
See More

In-Demand Engine Timing Parts for 2017 GMC Sierra 3500 HDs

Select from 15 premium Engine Timing Parts parts for your 2017 GMC Sierra 3500 HD, with prices ranging from $28.99 to $394.99.

GM Genuine Parts – GM Genuine Parts Camshaft Position Actuator Solenoid Valve, 12682000 (Part No.12682000)

GM Genuine Parts Camshaft Position Actuator Solenoid Valve, 12682000

from

$147.99
GM Genuine Parts Engine Variable Valve Timing Solenoids are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These solenoids regulate oil flow to the cam phasers that change the timing of the camshafts. The desired positions of the camshaft varies with engine speed and load and is calibrated for optimal engine performance, drive quality, and efficiency. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
See More

Cloyes Gear – Cloyes Gear Engine Timing Chain Tensioner, 9-5490 (Part No.9-5490)

Cloyes Gear Engine Timing Chain Tensioner, 9-5490

from

$54.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems, delivering premium-quality solutions. A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design and application, Cloyes engine timing chain tensioners can use spring tension or hydraulic pressure to properly tension the chain for optimal performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.
See More

Cloyes Gear – Cloyes Gear Engine Timing Chain, 9-4205 (Part No.9-4205)

Cloyes Gear Engine Timing Chain, 9-4205

from

$45.49
Since 1921, Cloyes has been the trusted leader in automotive timing systems. Our timing chains are built to synchronize crankshaft and camshaft rotation with absolute accuracy, ensuring precise valve timing and long-term engine performance. Available as stand-alone chains or in complete kits, Cloyes timing chains are manufactured from premium materials, heat-treated, pre-stressed and engineered for a perfect chain-to-sprocket tooth fit €” delivering quiet operation, durability, and OE-level performance you can count on. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading warranty and technical support.
See More

Cloyes Gear – Cloyes Gear Primary Timing Chain Kit: Exact Fit, 60 Links, Timing Components, With Sprockets, 9-4205SB (Part No.9-4205SB)

Cloyes Gear Primary Timing Chain Kit: Exact Fit, 60 Links, Timing Components, With Sprockets, 9-4205SB

from

$98.99
Since 1921, Cloyes has been the trusted leader in automotive timing systems delivering premium-quality solutions. Cloyes engine timing chain kits are engineered for precision, durability, and optimal engine performance. Kits include all chains, sprockets, tensioners, chain guides, and chain tensioner guides – respective to application and kit selection. To ensure total timing system integrity, Cloyes recommends replacing all engine timing components. Trusted by professionals for over a century & backed by an industry-leading Warranty (limited) and technical support.
See More

ACDelco – ACDelco Timing Chain, 12646386 (Part No.12646386)

ACDelco Timing Chain, 12646386

from

$75.99
ACDelco GM Original Equipment Engine Timing Chains synchronize the rotation of the crankshaft and camshaft(s) in an internal combustion engine. They help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes, and are GM-recommended replacements for your vehicle’s original components. These original equipment timing chains have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Dorman – Dorman Camshaft Phaser – Variable Timing Camshaft Gear, 918-186 (Part No.918-186)

Dorman Camshaft Phaser - Variable Timing Camshaft Gear, 918-186

from

$178.99
The variable valve timing sprocket is key to ensuring an engine’s performance and clean running. Replace a worn factory VVT sprocket with this quality engineered sprocket to restore lost performance. Designed to install and perform like the original.
See More

Carquest Premium – Carquest Engine Variable Valve Timing (VVT) Oil Control Valve, VVA1257 (Part No.VVA1257)

Carquest Engine Variable Valve Timing (VVT) Oil Control Valve, VVA1257

from

$79.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
See More

National – National (Part No.11077033)

National

from

$40.99
National . from National
See More

GM Genuine Parts – GM Genuine Parts Non-hydraulic Eng Timing Damper Kit: Exact Fit, W/ Tensioner, Bolts, & Retainers, 12626407 (Part No.12626407)

GM Genuine Parts Non-hydraulic Eng Timing Damper Kit: Exact Fit, W/ Tensioner, Bolts, & Retainers, 12626407

from

$52.99
ACDelco GM Original Equipment Engine Timing Damper Kits remove unnecessary slack from the timing chain to help prevent chain rattle and excessive component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment engine timing damper kits contain components that will provide the same performance, durability, and service life you expect from General Motors.
See More

Cloyes Gear – Cloyes Gear Engine Timing Crankshaft Sprocket, S827 (Part No.S827)

Cloyes Gear Engine Timing Crankshaft Sprocket, S827

from

$28.99
Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.
See More

INA US – INA US Engine Timing Set, ZC-9-3673TX9 (Part No.ZC-9-3673TX9)

INA US Engine Timing Set, ZC-9-3673TX9

from

$394.99
INA timing chain kits include all essential components to ensure that the repair is done right the first time. Each kit contains all necessary chains, tensioners, and guides. In certain applications the kit also contains the necessary gears and sprockets, along with a specially formulated, high performance, chain additive uniquely made for Schaeffler by Liqui Moly. The chain additive helps reduce friction during the break in period and reduces run-in wear by up to twenty percent.
See More

GM Genuine Parts – GM Genuine Parts Camshaft Phaser, 12606358 (Part No.12606358)

GM Genuine Parts Camshaft Phaser, 12606358

from

$239.99
ACDelco GM Original Equipment Camshaft Phasers adjust camshaft positioning while your vehicle’s engine is running, and are GM-recommended replacements for your vehicle’s original components. They help ensure the camshaft rotates in the correct timing with other valve train components to provide optimal engine performance, and work with your vehicle’s variable valve timing solenoid to help maximize drive quality and fuel economy. These original equipment phasers have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
See More

Carquest Premium – Carquest Engine Variable Valve Timing (VVT) Sprocket, VVC1134 (Part No.VVC1134)

Carquest Engine Variable Valve Timing (VVT) Sprocket, VVC1134

from

$193.99
The variable valve timing (VVT) system allows the engine control module (ECM) to regulate the intake and exhaust valve phase angle providing the most optimal engine volumetric efficiency under all engine operating condition to control tailpipe emissions and engine efficiency. Variable valve timing is an emission control device and although there are various methods of operation, the typical device is regulated by oil control valves, actuator solenoids and camshaft phasers.
See More

INA US – INA US Engine Timing Chain Kit, ZC-9-4205SB (Part No.ZC-9-4205SB)

INA US Engine Timing Chain Kit, ZC-9-4205SB

from

$132.99
INA timing chain kits include all essential components to ensure that the repair is done right the first time. Each kit contains all necessary chains, tensioners, and guides. In certain applications the kit also contains the necessary gears and sprockets, along with a specially formulated, high performance, chain additive uniquely made for Schaeffler by Liqui Moly. The chain additive helps reduce friction during the break in period and reduces run-in wear by up to twenty percent.
See More

INA US – INA US Engine Timing Chain, ZC-9-4205 (Part No.ZC-9-4205)

INA US Engine Timing Chain, ZC-9-4205

from

$53.99
INA Timing Chains are designed to meet or exceed OE quality and performance. All our chain Plates and Pins are heat treated to precise hardness for maximum performance and durability.
See More

Most Sold 2017 GMC Sierra 3500 HD Engine Mounts

Explore our best-selling GMC parts for the 2017 Sierra 3500 HD among 2 OEM and aftermarket options starting from $85.99.

Anchor – Anchor Engine Mount, 3590 (Part No.3590)

Anchor Engine Mount, 3590

from

$85.99
This mount supports the engine and dampens vibration. All mounts are engineered and designed to OEM standards using the latest CAD/CAM engineering process ensuring the highest consistency and quality. Only natural and Styrene Butadiene rubber is used to provide premium abrasion resistance, aging stability to ensure maximum life, and performance. Any included fasteners are hardened steel with heat treated Grade 5 bolts. Chemlock bonding agent is used to ensure a superior rubber-to-metal bond. All Rubber material is manufactured to specific Durometer (hardness) measurements based on vehicle application requirements. Hydraulic Mounts, applicable where OE, are engineered for high vibration and torque applications and filled with special hydraulic fluid to dampen excess noise and vibration.
See More

Anchor – Anchor Engine Mount: Front Left, Front Right, 1 Piece, 3550 (Part No.3550)

Anchor Engine Mount: Front Left, Front Right, 1 Piece, 3550

from

$85.99
Anchor 3550 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
See More

Top-Rated Engine Parts Brands For Your 2017 GMC Sierra 3500 HD

Shop for the best-rated brands offering Engine Parts and other products for your 2017 GMC Sierra 3500 HDs. Below you’ll find some of our best rated Engine Parts from Felpro, Sealed Power, and Dorman, and more. Engine Parts from these brands that fit a 2017 Sierra 3500 HD start at just $6.29 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2017 GMC Sierra 3500 HD Engine Parts

When it comes to maintaining or upgrading your 2017 GMC Sierra 3500 HD, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 2017 GMC Sierra 3500 HD. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $45.99. Plus, with over 157 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Felpro Multi-Purpose O-Ring, 72401
from $6.99
(41)
Felpro Multi-Purpose O-Ring, 72401
“Good”
Felpro Engine Oil Pan Gasket Set - PermaDry molded rubber, OS 30693 R
from $74.99
(74)
Felpro Engine Oil Pan Gasket Set – PermaDry molded rubber, OS 30693 R
“Fit great, good quality”

Popular Sealed Power 2017 GMC Sierra 3500 HD Engine Parts

Sealed Power auto parts is one of the highest quality Engine Part brands in the market. Any 2017 GMC Sierra 3500 HD owner should feel confident when installing genuine Sealed Power parts in their vehicle. To ensure the best fit and performance for your 2017 Sierra 3500 HD, Advance Auto Parts carries a full inventory of 3 Sealed Power Engine Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Sealed Power Engine Parts range from $6.29 to $8.89, plus, with more than 4 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.
Sealed Power Engine Connecting Rod Bearing, 2555A 1
from $7.59
(1)
Sealed Power Engine Connecting Rod Bearing, 2555A 1
“great price and fit good”
Sealed Power Engine Connecting Rod Bearing, 2555A 20
from $6.29
(2)
Sealed Power Engine Connecting Rod Bearing, 2555A 20
“I needed these parts right away & Advance Auto had them in stock. They were exactly what I needed, they worked great.”

FAQs for 2017 GMC Sierra 3500 HD Engine Parts

Which Engine Parts are best-sellers for 2017 GMC Sierra 3500 HDs?

Out of 210 Engine Parts that fit 2017 GMC Sierra 3500 HDs, the following parts are the top sellers:

What’s the price range for 2017 GMC Sierra 3500 HD Engine Parts?

Engine Part prices for the 2017 GMC Sierra 3500 HD start at $0.99 and go up to $4,791.00 for the most premium parts.

What’s the average price of a Engine Part for a 2017 GMC Sierra 3500 HD?

The average price for Engine Parts for the 2017 GMC Sierra 3500 HD is $179.47. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other GMC Sierra 3500 HD model years?

Yes, we currently carry Engine Parts for 18 model years of GMC Sierra 3500 HDs between 2007 and 2026. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2016, 2015, and 2014.

What are the cheapest Engine Parts for my 2017 GMC Sierra 3500 HD?

The cheapest 2017 GMC Sierra 3500 HD Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2017 GMC Sierra 3500 HD?

Out of 3,744 reviews by customers, our 2017 GMC Sierra 3500 HD Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2017 GMC Sierra 3500 HD and their top-rated products:

What types of Engine Parts do you sell for my 2017 GMC Sierra 3500 HD?

Can I get help with 2017 GMC Sierra 3500 HD Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.

What is your return policy for GMC Sierra 3500 HD Engine Parts?

Advance Auto Parts keeps returns simple. For new GMC Sierra 3500 HD Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.