2017 Ferrari 488 GTB Car Parts & Accessories

Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

• 
  
  

Product Features:

• 1.2X Better viscosity control to help engines run better for longer (1)
• 2X Better engine cleanliness to help maximize engine performance (1)
• (1) As measured in DV6 test vs. test limit
• Approved and licensed specifications:
• ACEA A3/B4
• API SP
• BMW Longlife-01
• Porsche A40
• MB-Approval MB 229.5
• Renault RN0700 / RN0710
• VW 502 00 / 505 00
• Meets engine test requirements of Chrysler MS 12991

Mobil 1 FS European Car Formula 0W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 0W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America¿s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending September 30, 2023)

Product Features:

• Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes(1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
• Manufacturer Part Number: 120760

Mobil 1 FS European Car Formula 0W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 0W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions.
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes (1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
• Manufacturer Part Number: 112628
• Turbocharged Engine Protection: Approved for many Mercedes-Benz, VW, Audi, and Porsche vehicles, this formula offers excellent protection for turbocharged engines.

Castrol EDGE Euro 5W-40 A3/B4 is an advanced full synthetic motor oil engineered to exceed manufacturer test limits ensuring the highest level of protection and maximum performance for European cars. European car manufacturers create unique motor oil specifications to ensure the lubricant can withstand the intense pressure, heat and friction generated in a high output engine. To ensure compliance, rigorous engine tests are developed, with approval granted only when the oil achieves the minimum values required in each test. Castrol EDGE Euro Car fluids are formulated to exceed these requirements and deliver maximum protection and performance.

Product Features:

• 
  
  

Product Features:

• 1.2X Better viscosity control to help engines run better for longer (1)
• 2X Better engine cleanliness to help maximize engine performance (1)
• (1) As measured in DV6 test vs. test limit
• Approved and licensed specifications:
• ACEA A3/B4
• API SP
• BMW Longlife-01
• Porsche A40
• MB-Approval MB 229.5
• Renault RN0700 / RN0710
• VW 502 00 / 505 00
• Meets engine test requirements of Chrysler MS 12991

Pennzoil Platinum Euro Full Synthetic 5W-40 motor oil is designed to maximize engine protection for modern light-duty diesel and high-performance engines in European vehicles. Pennzoil Platinum Euro exceeds the most stringent car manufacturer requirements for cleanliness and protection based on Fiat, Mercedes-Benz, Porsche, Renault, and VW specifications. Made with natural gas, nothing keeps your engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40) than Pennzoil Platinum Euro motor oil. It protects horsepower, provides excellent performance in extreme temperatures and provides better fuel economy (based on latest industry standard). It also helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed. (Pennzoil Platinum Lubrication Limited Warranty: Up to 15 years or 500,000 miles, whichever comes first, guaranteed, if you exclusively use Pennzoil Platinum Full Synthetic motor oil, Pennzoil Platinum High Mileage Full Synthetic motor oil, and Pennzoil Platinum Euro Full Synthetic motor oil. Your engine must have fewer than 125,000 miles and have been manufactured in the past 72 months. To maintain your warranty, change your vehicles oil and oil filter at least as often as recommended by the vehicle manufacturer. Enrollment required. Keep your receipts. Other conditions apply. See pennzoil.com/warranty to enroll and for full details and terms.)

Product Features:

• Full synthetic 5W-40 motor oil that is made with natural gas and designed to maximize engine protection
• Formulated for modern light-duty diesel and high-performance engines in European vehicles, including Fiat, Mercedes-Benz, Porsche, Renault, and VW
• Helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first, guaranteed
• Delivers faster low-temperature oil flow and protection in extreme heat
• Protects horsepower and keeps engine closer to factory clean (based on Sequence VH and M-111 sludge test using SAE 0W-40)
• Provides better fuel economy (based on latest industry standard)
• Meets or exceeds the following industry requirements: API SP and all previous categories; ACEA A3/B3, A3/B4
• Meets or exceeds the following OEM specifications: Fiat 9.55535.Z2 and 9.55535.N2; Chrysler MS-10725 and MS-12991; BMW LL-01; Mercedes-Benz MB-Approval 226.5/ 229.3/229.5; Porsche A40; Renault RN 0700, RN 0710; Volkswagen VW 502 00, 505 00
• For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

Mobil 1 FS European Car Formula 5W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 5W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 fs european car formula full synthetic engine oil 5w-40 helps to extend engine life even in severe conditions.
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes (1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -30 degrees F)
• Manufacturer part number: 125865

Mobil 1 FS European Car Formula 5W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 5W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America’s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ((1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending July 1, 2023)

Product Features:

• Mobil 1 FS European Car Formula full synthetic motor oil 5W-40 helps to extend engine life even in severe conditions.
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes (1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -30 degrees F)
• Manufacturer Part Number: 125864
• Turbocharged Engine Protection: Approved for many Mercedes-Benz, VW, Audi, and Porsche vehicles, this formula offers excellent protection for turbocharged engines.

Mobil 1 FS European Car Formula 0W-40 helps to extend engine life, even in severe conditions, and protects critical engine parts for up to 10,000 miles between oil changes (1) . Its uniform synthetic oil molecules reduce friction, helping to prevent deposits and sludge buildup. This technologically advanced formulation provides excellent internal engine heat protection (up to 500 degrees Fahrenheit), and low-temperature protection (to -40 degrees Fahrenheit), supporting quick cold-weather starting and ultra-fast protection. Mobil 1 FS European Car Formula 0W-40 also helps control oxidation to prevent oil breakdown. Approved for many Mercedes-Benz, VW, Audi and Porsche vehicles, this formula provides excellent turbocharged engine protection. Mobil 1 is America¿s leading synthetic motor oil brand at retail (2) , recommended by car builders and experienced mechanics, and is the Official Motor Oil of NASCAR. ( (1) Protects for 10,000 miles or 1 year, whichever comes first. To learn more about the Mobil 1 Limited Warranty, visit Mobil.US. (2) Source: The NPD Group/ Retail Tracking Service/ Dollar Sales/ PCMO Full Synthetic/ 52 weeks ending September 30, 2023)

Product Features:

• Mobil 1 FS European Car Formula full synthetic motor oil 0W-40 helps to extend engine life even in severe conditions
• Helps to control oxidation to prevent oil breakdown and maintain excellent viscosity for up to 10,000 miles between oil changes(1)
• Provides outstanding engine wear protection and performance with uniform synthetic oil molecules for better friction reduction
• Keeps your engine running like new by working to prevent damaging deposits and sludge buildup
• Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (up to -40 degrees F)
• Manufacturer Part Number: 125220

Pennzoil Platinum Euro is designed for complete protection and performance for European vehicles. Pennzoil Platinum Euro helps extend engine life and protects for up to 15 years or 500,000 miles, whichever comes first. Guaranteed.1 Pennzoil Platinum Euro is made from natural gas, not crude. Its base oil is 99.5% free from engine clogging impurities. The Proof is in the Pennzoil. 1 Based on Sequence IIIH results . Does not apply to Pennzoil Platinum Euro motor oil.

Product Features:

• No other leading motor oil provides better protection from friction (Based on Sequence IVA wear test using SAE 0W-40)
• Better Fuel Economy (Meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry standard gasoline engines)
• Protects Horsepower
• Nothing keeps your engine close to factory clean (Based on Sequence vh and M-111 sludge test using SAE 0W-40).
• Complete Protection and Performance: Pennzoil Platinum Euro is specifically designed to provide comprehensive protection and optimal performance for European vehicles.
• Extended Engine Life: This full synthetic 5W-40 engine oil helps extend engine life, offering protection for up to 15 years or 500,000 miles, whichever comes first.
• High Purity Base Oil: Made from natural gas, not crude, Pennzoil Platinum Euro’s base oil is 99.5% free from engine-clogging impurities, ensuring cleaner engine performance.
• Full Synthetic Composition: As a full synthetic oil, it offers superior performance and protection compared to conventional oils, making it ideal for high-performance European engines.
• Pennzoil Platinum Euro meets the rigorous demands of European vehicle manufacturers, ensuring reliability and efficiency.

Fully synthetic LIQUI MOLY specialty with a unique additive technology. The powerful MFC (Molecular Friction Control) technology prevents formation of deposits while simultaneously reducing frictional losses. The synergetic effect provides optimum wear protection even under tough operating conditions. Improved fuel consumption and increased engine life are some of the end results. The oils fluorescent green color is typical for the MFC formulation.

Product Features:

• 
  
  

Product Features:

• Outstanding engine cleanliness
• Excellent high and low temperature behavior
• Friction and wear reducing
• Optimum stability to aging
• Enhanced fuel efficiency through reduced frictional losses.

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest-quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications.
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA

Product Features:

• FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
• HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
• IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
• ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
• Extra wear protection vs. industry and oem standards with advanced anti-wear additives
• Superior performance for european gasoline and diesel engines
• Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
• Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
• Superior engine sludge and varnish protection for European-made gasoline and diesel engines.

Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:

• All season use reliable at high and low temperatures
• Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
• An engine oil that reduces oil and fuel consumption
• Ensures fast lubrication of the engine
• Made in germany
• Full Synthetic Oil Composition

Prestone All Vehicles antifreeze+coolant (ready to use) is truly designed to work with all vehicles; all makes, models, years and fluid colors. It is designed to work with all new engines while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. Internal damage can cause engine part failure, leading to expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs/300,000 miles and also to protect the internal parts of the engine for 10yrs/300,000, officially patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 10 year/300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone All Vehicles antifreeze+coolant (concentrate) is truly designed to work with all vehicles; all makes, models, years & fluid colors. It is designed to work with all new engines, while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. Prestone’s Antifreeze + Coolants are designed to the highest standards using state of the art technology. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. internal damage can cause engine part failure, expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs / 300,000 miles and also to protect the internal parts of the engine for 10yrs / 300,000, officially patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT & IAT.
• Longer Engine Life Guarantee – 10 Yr., 300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

FRAM Extended Life AMAM Concentrate is compatible with any antifreeze/coolant in any vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 5 year/150,000 mile Extended life formula.
• Includes patented technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 150,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG and water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

PEAK Antifreeze + Coolant Concentrate is specially engineered to deliver guaranteed superior lifetime protection. Its advanced universal formula contains a proprietary blend of 10X the scale-fighting inhibitors coupled with robust organic additives to fight against the damaging effects of scale deposits and corrosion. PEAK Antifreeze + Coolant is free of 2-EHA, silicate, nitrite, borate, and amines, ensuring maximum cooling system performance for 10 years/300,000 miles. It is compatible for use with any color or type of antifreeze/coolant in the system.

Product Features:

• Specially formulated to deliver Superior Lifetime Protection against damaging scale and corrosion
• Contains 10X the scale-fighting inhibitors to ensure maximum cooling system performance
• Provides more coverage for 10+ years/300,000+ miles of service
• Universal formula is compatible with any color or type of antifreeze/coolant
• Meets the performance requirements of ASTM D3306 and D4985

FRAM Extended Life AMAM 50/50 is compatible with any antifreeze/coolant in any vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. Top-off your cooling system with FRAM Extended Life AMAM 50/50, which is a blend of 50% antifreeze and 50% demineralized water. FRAM 50/50 meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT
• 5 year/150,000 mile Extended life formula.
• Meets or exceeds ASTM D3306 and D4985 for corrosion protection.
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Liqui Moly’s Leichtlauf High Tech 5W-40 is a fully synthetic, premium low-friction engine oil for all-season use in gasoline and diesel engines without diesel particulate filters (DPF). The combination of innovative base oils – based on synthesis technology and the latest additive technology – guarantees an engine oil that reduces oil and fuel consumption and that ensures fast lubrication of the engine. Depending on the manufacturer instructions, oil change intervals of up to 40,000 km are possible. Ideally suited for modern gasoline and diesel engines with multi-valve technology, turbocharger and with or without charge air cooling. Especially suitable where there are long intervals between changes and heavy duty engine requirements.

Product Features:

• All season use reliable at high and low temperatures
• Suited for modern gasoline and diesel engines with multivalve technology, turbocharger and with or without charge air cooling
• An engine oil that reduces oil and fuel consumption
• Ensures fast lubrication of the engine
• Made in germany
• Low-friction formula: Leichtlauf LIQUI-MOLY Synthetic Engine Oil 5W-40 is a premium, fully synthetic engine oil that reduces oil and fuel consumption, thanks to its low-friction formula.

PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES is a line of premium coolants specifically designed to match the technology and color requirements of European vehicles. Each coolant is formulated with the same corrosion inhibitor technology that protected your vehicle straight from the factory. Color cues on the packaging and a list of covered vehicles on the front label make it easy to identify the right match for your specific vehicle. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – PINK is an ethylene glycol-based antifreeze/coolant specifically developed for use in any European vehicle requiring a Pink silicate-free organic acid technology (OAT) formulation. It contains high-quality organic acid corrosion inhibitors and is free of borate, nitrite, nitrate, phosphate, silicate and amines chemicals. PEAK ORIGINAL EQUIPMENT TECHNOLOGY ANTIFREEZE + COOLANT for EUROPEAN VEHICLES – PINK meets the performance requirements of ASTM D3306 and BS 6580. With a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.

Product Features:

• Matches each European vehicle manufacturer¿s technology and color requirements
• Matches each European vehicle manufacturer┐s technology and color requirements
• Protects all cooling system metals from rust and corrosion
• Meets the performance requirements of ASTM D3306 and BS 6580
• Service life of up to 5 years/150,000 miles with a complete cooling system flush and fill
• Color-coding and vehicle applications listed on the front simplify selecting the right antifreeze/coolant
• Available as both concentrate and 50/50 products to do the job right
• Testing Requirements: For proper freeze and boil over protection, use a traditional refractometer or hydrometer to measure the percentage of ethylene glycol by volume.

European engines need a premium motor oil designed to help them last. Valvoline European Vehicle Full Synthetic Motor Oil. It’s the motor oil specially developed to extend the life of European-made gasoline and diesel engines. Our exclusive formula uses top wear additives, premium antioxidants and added detergents to fight wear, resist oil breakdown and defend against deposits better than industry standards. Its exceptional range of temperature protection ensures your engine will be defended when the weather and road conditions get tough. This superior level of protection makes it the best choice for most Audi, BMW, Mercedes-Benz, Porsche, and VW vehicles. Engineered with ingenuity, tested with tenacity, and proven with purpose, our formula was innovated in America with a century and a half of hands-on experience from the original motor oil brand.

Product Features:

• 
  
  

Product Features:

• Advanced protection in european vehicles agains the four main causes of engine breakdown: wear friction heat and deposits
• Extra wear protection vs. industry and oem standards with advanced anti-wear additives
• Superior performance for european gasoline and diesel engines
• Exceptional high/low temperature protection defends your engine no matter the climate or driving conditions
• Meets or exceeds all requirements of api sp, acea a3/b3, a3/b4, mb 229.5, 229.3, &226.5, vw 50200/50500 & 50501, bmw ll-01 & ll-14fe+, porche a40, volvo 95200356, renault rn0700 & rn0710, psa b71 2296, and chrysler ms-12633/ ms-10725
• Premium Protection: Valvoline European Vehicle Full Synthetic Engine Oil is specially designed to extend the life of European-made gasoline and diesel engines, providing premium protection against wear, oil breakdown, and deposits

Pentosin FFL-4 is the only approved First Fill and Service Fill transmission fluid for the new generation of BMW double clutch gear transmissions (DCT). Pentosin FFL-4 is founded on a fully synthetic base oil technology for safe operation at even the highest thermal load. FFL-4 features a special clutch friction performance which makes it mandatory to be applied solely to the double clutch gear box do not mix with any other gear oils.

Product Features:

• Formulated anti-wear chemistry and friction modifiers guarantee stable friction performance in modern transmissions.
• Fully synthetic fluid with constant stable friction characteristics under the most severe driving conditions.
• Exclusively developed for applications in the new Audi/Volkswagen, BMW, Porsche double clutch transmission.
• Features a special clutch friction performance which makes it mandatory to be applied to DCT gear box only.

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Concentrated formula. Must mix with high quality water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

All Antifreeze + Coolants are not the same. Prestone MAX antifreeze + coolant is GUARANTEED to provide MAXIMUM ENGINE PROTECTION in all Vehicle Makes, Models & Years. It delivers the widest range of temperature protection, industry leading protection from engine damaging rust & corrosion and the longest lasting protection in the industry. Trust Prestone for maximum, year-round engine protection.

Product Features:

• Can top off or replace all antifreeze + coolant colors and formulations in all Vehicle Makes, Models & Years – Guaranteed.
• Our patented, advance formula provides extreme temperature protection from the worst of winter deep freezes and scorching summer heat.
• We deliver industry leading protection from engine damaging rust, corrosion & buildup. Prestone MAX completely stops the formation of rust & corrosion for better engine performance and longer engine life.
• Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
• This is a Concentrated Formula. Must mix with high quality water to the desired ratio.

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Ready to Use formula – Prediluted 56/54. Perfect for small volume top-off or complete drain and refill of the cooling system

All Antifreeze + Coolants are not the same. Prestone MAX antifreeze + coolant is GUARANTEED to provide MAXIMUM ENGINE PROTECTION in all Vehicle Makes, Models & Years. It delivers the widest range of temperature protection, industry leading protection from engine damaging rust & corrosion and the longest lasting protection in the industry. Trust Prestone for maximum, year-round engine protection.

Product Features:

• Can top off or replace all antifreeze + coolant colors and formulations in all Vehicle Makes, Models & Years – Guaranteed.
• Our patented, advance formula provides extreme temperature protection from the worst of winter deep freezes and scorching summer heat.
• We deliver industry leading protection from engine damaging rust, corrosion & buildup. Prestone MAX completely stops the formation of rust & corrosion for better engine performance and longer engine life.
• Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
• This is a Ready to Use formula – prediluted 56/44.

Ball-seat valve stem assembly with internal shear ring.

Product Features:

• 43mm
• Rim Hole Compatibility: 0.453″
• 200 PSI maximum cold inflation pressure

Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. . All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.

Product Features:

• DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
• DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
• SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
• Each kit includes a fully assembled Schrader rubber valve assembly and mounting screw
• Valve cores are designed to OE specifications
• Replacement components in Schrader TPMS service kits are sensor specific
• OE fit, form, and function
• The installation screw is designed to cut and form the threads when attaching the valve stem to the sensor body to ensure proper torque retention

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• OE fit, form, and function
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Sensor comes fully assembled and ready to install
• Ready out of the box
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Easy to program and covers the majority of vehicles on the road in North America
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Rubber valve can be replaced with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Engineered and manufactured to OEM design and quality specifcations
• Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Sensor comes fully assembled and ready to program and install
• Easy to program and covers the majority of vehicles on the road in North America

The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.

Product Features:

• Includes 4 Rubber Press-in Valve Stems
• Compatible with Autel 1-Sensors
• Compatible with Autel 315MHz & 433MHz MX-Sensors
• Warranty on Material and Workmanship
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• 100% ID clone-able with no relearn required
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• Schrader Programmable EZ-sensor with Rubber Snap-In Valve – Must be Programmed to Specific M/M/Y Vehicle
• Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
• Easy to program and covers the majority of vehicles on the road in North America
• Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
• Sensor comes fully assembled and ready to program and install
• Engineered and manufactured to OEM design and quality specifcations
• Future-proofed OE quality TPMS product supports new and pending OE technologies
• Aluminum valve can be replaced by Schrader clamp-in valve kit 29049

Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.

Product Features:

• Four Metal Valve Stems
• Press-in interchangeable metal valve stem
• Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
• Press release valve design allows easy installation without a tool for sensor head fitting
• High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing

Component Kit includes a complete list of individual parts needed to service and replace existing rubber and metal valve stem Autel MX-Sensors. The smaller storage case keeps your replacement parts organized and easily within arms reach during your repair projects.

Product Features:

• MX-Sensor Components
• 4 Metal Valves
• 4 Rubber Valves
• Rubber Gasket (2×10 pcs)
• Screw Nut (2×10 pcs)
• Washer (2×10 pcs)
• Metal Valve Cap (2X10 pcs)
• Rubber Valve Cap (2X10 pcs)
• Valve Core (2X10 pcs)

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

Product Features:

• Black Metal Press-in Valve Stem
• Compatible with Autel 1-Sensor

The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz & 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
• Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
• Combined Frequency 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

1-SENSOR 100 PK

The “We Fix TPMS” Bundle, part number 1SENSHOP, includes 40 MX-Sensor 1-Sensors with rubber valves, and three shop display items. An 18 x 36 inch window poster, a 72 x 24.6 inch co-branded banner, and an 8.5 x 11 inch counter card are included.

Product Features:

• Includes two 20-packs of MX-Sensor 1-Sensor with Rubber Valves
• Includes Co-Branded Bay Banner
• Includes TPMS Service Shop Window Poster
• Includes Counter Card
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com. For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• EZ-sensor must be programmed to specific M/M/Y vehicle
• EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
• EZ-sensor can be programmed by most all TPMS programming tools on the Market
• Supports 314.9, 315 and 433 MHz sensor applications
• Always keep your TPMS scan and programming tool up to date with the latest software
• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Rubber Valve can be replaced by rubber valve kit 20018 or aluminum valve kit 34000
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)

The MX-Sensor 1-SensorM Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-SensorM features a combined frequency of 315MHz & 433MHz with metal valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-SensorM is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve.
• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.

Product Features:

• MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
• COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
• FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
• DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
• COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Huf Baolong Electronics (BH Sens) provides the market with OE Replacement sensors that are exactly like the OE sensor provided to the manufacturer and being replaced. The replacement tire sensors can be installed directly without programming, just relearn the sensors to the vehicle with a TPMS tool after install.

Product Features:

• Ready out of the box – no programming required
• Equivalent in function and quality of the OE Sensor
• Quick and easy installation. Only need to relearn to vehicle upon installation.
• Full WAL technology support for auto-locate.
• Metal valve included.
• Flexible valve angle 0 to 36 degrees.
• For specific models from Aston Martin, Audi, Bentley, BMW, Ferrari, Lamborghini, Maserati, McLaren, Mini, Porsche, Rolls Royce, Tesla

Schrader EZ-sensor Programmable TPMS sensor headlines the TPMS product offerings from Schrader TPMS Solutions. Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com – For more information about Schrader and its products visit: www.SchraderTPMS.com.

Product Features:

• EZ-sensor must be programmed to specific M/M/Y vehicle.
• EZ-sensor Programmable TPMS sensor fits 99% of vehicles on the road
• EZ-sensor can be programmed by most all TPMS programming tools on the Market
• Supports 314.9, 315 and 433 MHz sensor applications
• Always keep your TPMS scan and programming tool up to date with the latest software
• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Aluminum valve can be replaced by Schrader service kit 20049
• Nut Torque = 71 in-lbs
• Valve Core Torque = 3.5 in-lbs

Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com

Product Features:

• Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
• Sensor must be programmed to specifi Y/M/M vehicle
• Compatible with most programming tools
• Make sure that your TPMS programming tool is updated to it’s latest version
• Combines 314.9, 315 & 433 MHz application into one sensor
• Future proofed to support new and pending OE system technologies
• Optimizes inventory levels and returns
• Reduces overal cost and increases speed of service
• Use service kit 20018 to replace the rubber valve assembly
• Valve Core Torque = 3.5 in-lbs (0.4 Nm)
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Combined Frequency: 315MHz & 433MHz
• Programmable with Autel TPMS Service Tools
• Exclusive Press Release Button to Easily Replace Valve Stems
• Program to Replace 99% of OE Sensors
• Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
• Meets SAE Standards J1205 & J1206
• Maximum Signal Strength / Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

• Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Reprogrammable and Copy Clone Capable
• Full WAL and PAL technology support for auto-locate.
• Rubber valve included.

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Product Features:

• Programmable – Only take 3 seconds to configure to specific application. Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others.
• Always up-to-date with the new programming function via the TPMS diagnostic tool
• Reprogrammable and Copy Clone Capable
• Full WAL and PAL technology support for auto-locate.
• Metal valve included.
• Flexible valve angle 0 to 36 degrees.

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Maximum Signal Strength / Battery Reliability
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

Product Features:

• Maximum Signal Strength, Battery Reliability.
• 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
• Combined Frequency – 315MHz and 433MHz
• Programmable with Autel TPMS Service Tools
• Program to Replace 99 Percent of OE Sensors
• Meets SAE Standards J1205 and J1206
• Maximum Signal Strength, Battery Reliability
• Professional installation is strongly suggested
• The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
• Once programmed, the sensor performs identically to OEM direct-fit sensors

TRICO ExactFit Conventional wiper blades are easy to install and designed to match OE specifications and standards. These wiper blades live up to their name because they feature a pre-attached adaptor specific to your vehicle for an exact fit and easy installation.

Product Features:

• Original factory quality for the same fit and function as when the vehicle was new
• Pre-assembled connector for quick and easy, one-step wiper replacement every time
• Durable metal frame for added strength

TRICO ExactFit Conventional wiper blades are easy to install and designed to match OE specifications and standards. These wiper blades live up to their name because they feature a pre-attached adaptor specific to your vehicle for an exact fit and easy installation.

Product Features:

• Pre-installed connector offers quick and easy wiper replacement
• Tested to perform over 1.5 million cycles
• Metal Construction for exceptional strength and durability

TRICO Ice is a rugged and durable winter wiper blade designed specifically to combat severe weather and still offer optimal performance. Flexible beam blade design coupled with synthetic-blended armor for an infinitely flexible blade that can see you through even the worst driving conditions.

Product Features:

• Ruggedly constructed armor seals blade structure from severe weather
• One-piece, flexible design snugly conforms to most windshields
• Robust, heavy-gauge wiper element resists tearing in sub-zero temperatures

TRICO Ice is a rugged and durable winter wiper blade designed specifically to combat severe weather and still offer optimal performance. Flexible beam blade design coupled with synthetic-blended armor for an infinitely flexible blade that can see you through even the worst driving conditions.

Product Features:

• Ruggedly constructed armor seals blade structure from severe weather
• One-piece, flexible design snugly conforms to most windshields
• Robust, heavy-gauge wiper element resists tearing in sub-zero temperatures

Carquest XtraClear beam wiper blades are an all-weather design featuring enhanced beam blade engineered to perform over 1.5 million cycles. Our beam wiper blades feature SWIFT Easy Connection Technology for a quick and easy wiper replacement for most vehicles on the road today. The twin-point coupler delivers constant, even pressure across the entire windshield for excellent visibility. Carquest XtraClear beam wiper blades are a quiet, longer-lasting option for enhanced all-weather performance.

Product Features:

• Tested to perform over 1.5 million cycles ensures long-lasting performance.
• Beam wiper blade design delivers great visibility in all weather conditions
• SWIFT Easy Connection Technology offers quick and easy wiper replacement
• Infinite pressure points provide uniform contact across windshield
• Twin-point coupler delivers constant, even pressure across entire windshield for clear visibility
• Wiper Blade Connection Type: 7mm Hook, 8mm Hook, 9×3 Hook, 9×4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)

Carquest XtraClear beam wiper blades are an all-weather design featuring enhanced beam blade engineered to perform over 1.5 million cycles. Our beam wiper blades feature SWIFT Easy Connection Technology for a quick and easy wiper replacement for most vehicles on the road today. The twin-point coupler delivers constant, even pressure across the entire windshield for excellent visibility. Carquest XtraClear beam wiper blades are a quiet, longer-lasting option for enhanced all-weather performance.

Product Features:

• Tested to perform over 1.5 million cycles ensures long-lasting performance.
• Beam wiper blade design delivers great visibility in all weather conditions
• SWIFT Easy Connection Technology offers quick and easy wiper replacement
• Infinite pressure points provide uniform contact across windshield
• Twin-point coupler delivers constant, even pressure across entire windshield for clear visibility
• Wiper Blade Connection Type: 1/4 Side Lock, 7mm Hook, 8mm Hook, 9×3 Hook, 9×4 Hook, Pinch Tab, Pinch Tab Button, Push Button (19mm), Push Button (22mm), Side Pin (17mm), Side Pin (22mm)

XtraClear conventional blades are engineered for better wrap on today’s highly curved windshields. An aerodynamic steel frame provides exceptional strength and durability, while the pre-attached universal adaptor makes installation quick and easy.

Product Features:

• Engineered for better wrap on curved windshields
• Pre-attached universal adaptor fits many vehicles
• All metal construction for strength and durability

XtraClear conventional blades are engineered for better wrap on today’s highly curved windshields. An aerodynamic steel frame provides exceptional strength and durability, while the pre-attached universal adaptor makes installation quick and easy.

Product Features:

• Engineered for better wrap on curved windshields
• Pre-attached universal adaptor fits many vehicles
• All metal construction for strength and durability

DieHard Platinum AGM (Absorbent Glass Mat) batteries are specifically designed for today’s power hungry vehicles. DieHard Platinum AGM batteries are engineered to provide up to 2x the life vs. a standard flooded battery. This battery is ideal for vehicles with start-stop technology or high demand electrical accessories (back-up cameras, heated seats, navigation, plug-in accessories) which put a heavier load on the battery. DieHard Platinum AGM batteries are engineered with Stamped Grid technology, which features a stronger and more durable positive and negative grid design. Order your DieHard vehicle battery replacement today. Enjoy reliable starting power with no maintenance every season.

Product Features:

• AGM technology supports high power demands and accessories or newer vehicles with start-stop technology.
• Up to 2X longer lifespan compared to standard flooded batteries.
• Exceptional performance in high temperature climates.
• Superior starting power in cold weather conditions.
• Exceeds the vehicle manufacturer’s battery starting and reserve capacity power requirements with added AGM technology.
• Maintenance free with a non-spillable design allows for installation in any location, including inside passenger compartment.
• Higher level of vibration resistance compared to standard flooded batteries.
• Constructed with stamped grid technology for 3X more corrosion resistance, increased durability and full grid utilization for 60% more electrical flow compared to other grid designs.
• Our Stamped Grid manufacturing process uses 20% less energy and releases 20% fewer greenhouse gas emissions than other manufacturing methods

The OPTIMA YELLOWTOP high-performance AGM battery is the ULTIMATE POWER SOURCE and one of the few true dual-purpose automotive batteries available. With premium cranking power and impressive cycling capability, this heavy-duty battery is ideal for trucks with winches, vehicles with high-demand electronics and audio systems, commercial vehicles and heavy equipment. Key benefits of OPTIMA YELLOWTOP batteries include deep-cycling battery and OPTIMAL starting power, up to 3x longer service life, 15x more resistant to vibration, leak proof, mountable in virtually any position, maintenance-free, and more than 300 discharge / recharge cycles. OPTIMA YELLOWTOP batteries work well for tractors or forklifts.

Product Features:

• 99.99% pure lead, highly compressed radial grid plates make the battery virtually immune to vibration and corrosion.
• Proprietary AGM flat-plate technology features ultra-pure glass matt fiber separators between each highly compressed plate. The result is an increase in plate count and surface area maximizing power and significantly extending the life of the battery.
• Up to 3 times longer life vs. standard flooded batteries
• 15x the vibration resistance of a standard flooded battery
• Completely non-spillable, mountable in many positions
• Maintenance free for maximum convenience
• Faster recharging capabilities