2017 Cadillac Escalade ESV Ignition and Tune-Up Products
More 2017 Cadillac Escalade ESV Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2017 Cadillac Escalade ESV, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2017 Cadillac Escalade ESV Ignition and Tune-Up Products
ACDelco – Professional Ignition Wire Set (Part No.F1020575902ACD)
from
$92.02
Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products.
Product Features:
See More
Product Features:
- Designed to match Original Equipment wire sets in critical areas such as cable length and diameter, terminal design and insulator position.
- Have broad coverage available for most vehicles on the road today from 1980 to present.
- Provide a high degree of Radio Frequency Interference (RFI) suppression.
- Are designed to offer fit, form and function for optimum performance.
- Kevlar®-reinforced fiberglass core in select sets for increased strength.
- Core sheathed in radio-static-absorbent material for increased RFI suppression.
- Wire-wound, stainless-steel alloy conductor for maximum spark delivery and RFI suppression on most applications.
- A layer of conductive heat-resistant latex for added durability.
- Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability.
- Thick silicone outer jacket for excellent heat resistance.
Karlyn – Ignition Wire Set (Part No.F10202140926KAR)
from
$65.50
The Karlyn Ignition Wire Set incorporates two layers of high grade silicone for superior heat and voltage protection. The double extruded Silicone-over-Silicone wire contains 19 strands of tinned copper core which provides super conductivity and corrosion resistance.
Product Features:
See More
Product Features:
- OE-Equivalent.
- OEM style connectors for easy Installation.
- Resistant to high temperatures, corrosion and vibration.
- Ignition noise suppressed.
- Includes O.E. Type Connectors, Looms, Sensors and Harness Clips when required
DENSO – Spark Plug Wire Set: Aluminum Steel Core, 8 Wire Set (Part No.671-8062)
from
$72.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
ACDelco – Professional Ignition Wire Set (Part No.F1020575901ACD)
from
$90.99
Built to match the Original Equipment in length and fit, ACDelco Professional Ignition Wire Sets also offer a performance advantage over many aftermarket products.
Product Features:
See More
Product Features:
- Designed to match Original Equipment wire sets in critical areas such as cable length and diameter, terminal design and insulator position.
- Have broad coverage available for most vehicles on the road today from 1980 to present.
- Provide a high degree of Radio Frequency Interference (RFI) suppression.
- Are designed to offer fit, form and function for optimum performance.
- Kevlar®-reinforced fiberglass core in select sets for increased strength.
- Core sheathed in radio-static-absorbent material for increased RFI suppression.
- Wire-wound, stainless-steel alloy conductor for maximum spark delivery and RFI suppression on most applications.
- A layer of conductive heat-resistant latex for added durability.
- Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability.
- Thick silicone outer jacket for excellent heat resistance.
Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP5245)
from
$4.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Platinum spark plugs provide a center wire platinum firing tip which provides reduced gap erosion, fewer misfires, better performance and increased durability. Consider upgrading to Autolite Double Platinum or Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- High nickel alloy side electrode maintains precise gap
- Full platinum tip assures virtually no gap erosion for long life
- Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
DENSO – PT16TT Platinum TT Spark Plug (Part No.4511)
NGK – Ruthenium HX High Ignitability Spark Plug: DFE Tip Design, LTR5AHX (Part No.90220)
from
$14.99
NGK Ruthenium HX High Ignitability spark plugs are the best in class plug for todays modern vehicles. Patented Ruthenium technology offers the most advance tip technology and delivers the highest performance and life expectancy. Created from advanced OE technology as a high ignitability plug; Ruthenium HX spark plugs come with patented, specialized OEM DFE and PSPE tip designs. NGK Ruthenium HX High Ignitability spark plugs provide a more complete fuel burn resulting in a quicker throttle response, smoother idle and better cold starts. Ruthenium center electrode provides industry leading durability.
Product Features:
See More
Product Features:
- HIGH IGNITABILITY DOUBLE FINE ELECTRODE DESIGN: Combines 0.6 millimeter ruthenium center with opposed fine wire platinum ground electrode
- RUTHENIUM ALLOY CENTER ELECTRODE: NGK’s patented ruthenium technology produces maximum performance, ignitability & durability at high temperatures
- PLATINUM PIN TYPE GROUND ELECTRODE: Provides more complete fuel burn, quicker throttle response, smoother idle and better cold starts
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modern vehicles using OE DFE type spark plugs or for those seeking an aftermarket plug with the latest OE technology
Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP5243)
from
$6.49
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- Works to optimize engine performance for a longer life and improved fuel economy
- OE design
- Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
- Platinum ball welding process provides a consistent point of contact for enhanced adhesion
Carquest Premium – Engine Crankshaft Position Sensor Connector (Part No.PTA1136)
from
$69.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48881)
from
$137.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48933)
from
$85.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Carquest – Ignition Coil (Part No.26C1048)
from
$55.99
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.
Product Features:
See More
Product Features:
- High output
- Long spark duration
- High dielectric strength
- Corrosion resistant connections
- High reliability
- Long service life
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48713)
from
$103.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
ACDelco – Ignition Knock (Detonation) Sensor (Part No.213-1576)
from
$29.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Sends signals to the engine control module (ECM) to adjust timing
- Helps prevent damage to the engine caused by pre-ignition
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3656)
from
$23.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Knock Sensor (Part No.EKC1007)
from
$26.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Flat Response Knock Sensor (Part No.F6020352539DEL)
from
$85.51
As a global leader in engine and powertrain management systems technology, Delphi manufactures a Flat Response Engine Knock Sensor that is 100 percent OE, providing an exact fit and superior quality. The Delphi Flat Response Knock Sensor has a flat frequency response over a range of from 1 to 18 kHz, thus the same sensor can be used on different engines by simply adjusting the filter frequency of the signal processing electronics to match the knock frequency of the engine. In addition, the sensor responds to knock frequencies higher than the primary knock frequency. This allows the higher knock frequencies to be used by a control system, either individually or combined with the primary knock frequency
Product Features:
See More
Product Features:
- Self-generating piezoelectric design requires no power to the sensor
- Flat frequency response allows the same senor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Large mounting hole accommodates mounting bolts up to 10mm in diameter
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3654)
from
$57.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
ACDelco – Original Equipment Ignition Wire (Part No.F1030575906ACD)
from
$22.14
Built to match the original equipment in length and fit, ACDelco OES Ignition Wires offer a performance advantage over many aftermarket products.
Product Features:
See More
Product Features:
- ACDelco ignition wires are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
- Have broad coverage available for most vehicles on the road today from 1980 to present
- Provide a high degree of Radio Frequency Interference (RFI) suppression
- Are designed to offer fit, form and function for optimum performance
- Kevlar reinforced fiberglass core in select sets for increased strength
- Core sheathed in radio-static absorbent material for increased RFI suppression
- Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
- A layer of conductive heat-resistant latex for added durability
- Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
- Thick silicone outer jacket for excellent heat resistance
- Limited lifetime warranty*
ACDelco – Spark Plug Wire (Part No.357D)
from
$31.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Spark Plug Wire (Part No.356F)
from
$28.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Specific FitSpark Plug Wire (Part No.349V)
from
$19.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Spark Plug Wire (Part No.350R)
from
$24.99
ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Durable to help transfer high voltage pulses without damage
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Accel – Ignition Coils (Part No.140043K-8)
from
$533.99
Ignition Coils
MSD Ignition – Coils; Pro Power; GM L-Series Truck 99-07; 8-Pack (Part No.82868)
from
$839.99
MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. There are two types of housings for the MSD coils. Check your application for the visual match.
Product Features:
See More
Product Features:
- Multiple Sparks At Idle RPM
- Direct Bolt-In to Factory Connectors
- Improved Spark Energy And Voltage Output
- Patented Winding Design and Materials
Accel – Ignition Coils (Part No.140081-8)
from
$489.99
Ignition Coils
Popular 2017 Cadillac Escalade ESV Ignition and Tune-Up Products Categories
2017 Cadillac Escalade ESV Ignition and Tune-Up Products
You count on your 2017 Cadillac Escalade ESV to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 32 Ignition and Tune-Up Products ranging in price from $6.49 to $543.99, you’re sure to find everything you need for your 2017 Cadillac Escalade ESV.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like E3, NGK, and Autolite. 2017 Cadillac Escalade ESV Ignition and Tune-Up Products start as low as $6.49!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,200 extensive product reviews on 2017 Cadillac Escalade ESV Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITL16 with 5.0 stars and SPARK PLG-LASER IRID with 4.0 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2017 Cadillac Escalade ESV below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2017 Cadillac Escalade ESV
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2017 Cadillac Escalade ESV running right for years to come. In our inventory you’ll find brands like E3, NGK, Autolite, and even more.
Popular NGK Ignition and Tune-Up Products
You’ll find popular NGK brand products across Spark Plugs. All are waiting to get your 2017 Cadillac Escalade ESV back on the road. Some of the top-rated NGK products in these categories are:
Top-Rated Ignition and Tune-Up Products
If are what you’re looking for, our inventory holds plenty. We stock brand Ignition and Tune-Up Products for your 2017 Cadillac Escalade ESV, and some of our most reviewed parts include:
FAQs for 2017 Cadillac Escalade ESV Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2017 Cadillac Escalade ESV?
Out of 32 Ignition and Tune-Up Products for the 2017 Cadillac Escalade ESV, the most popular in our inventory are:
from
$9.99
(8)
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$12.99
(7)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, ITL16TT
Spark Plugs
from
$10.99
This product is not rated
Iridium Ultra Finewire Spark Plug: Optimal Performance, Durability, Ignitability
Spark Plugs
What are the top-rated 2017 Cadillac Escalade ESV Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2017 Cadillac Escalade ESV based on customer reviews/ratings are:
from
$11.49
(2)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, ITL16
“I really noticed a difference in performance after I installed spark plugs. I hope it will last.”
from
$10.29
(1)
SPARK PLG-LASER IRID
“After replacement, easy start, powerful sound, and easy accelerate.”
