2017 Cadillac Escalade ESV Belts and Hoses

Name: Premium Molded Coolant Hose
Brand: Gates
SKU: 22436
Price: 30.49 USD

Below you will find various in-demand Cadillac Belts and Hoses, components and accessories for your 2017 Escalade ESV. Advance Auto Parts has popular Escalade ESV parts like Belt Tensioners, Radiator Hoses, Fuel Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Escalade ESV model years including 2012, 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021 and more. Select a category of 2017 Cadillac Escalade ESV Belts and Hoses below and start saving instantly.

Popular 2017 Cadillac Escalade ESV Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Serpentine Belt Drive Component Kits

Engine Oil Cooler Hoses

Heater Hoses

Fuel Injector Hose Kits

Essential Belts and Hoses for 2017 Cadillac Escalade ESVs

from

$30.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$169.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.

Product Features:

Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$23.29

GM Genuine Parts PCV Valve Tubing is designed, engineered, and tested to rigorous standards, and is backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$27.99

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$117.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$162.99

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$154.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$157.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Materials specially designed to resist collapse in a vacuum
Designed to resist electrochemical degradation, which is the leading cause of hose failure
EPDM tube; synthetic fiber knit reinforcement, heat, ozone- and chemical coolant-resistant EPDM cover
Manufactured with exact OEM hose components (quick connects, tap/tee connectors, sensors, etc.)
Meets SAE 20R3 EC Class D1 less than 25 mm (1 in) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and more
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$57.99

This Litens Serpentine Belt Drive Component Kit fits 1999-2009 Cadillac Escalade / Chev Avalanche, Express, Silverado, Suburban, Tahoe / GMC Savana, Sierra, Yukon w/4.8/5.3/6.0/6.2L (AC Drive). These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. This kit contains a Litens belt tensioner and a Bando serpentine belt. All required hardware is included for the installation . Application specific instructions are also conveniently included. The tensioner in this kit has an improved design with a premium bearing, improved corrosion resistance, and an increase in belt tension which will lead to less noise and slip. These features were not available on the original part. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

All-in-one solution to get the whole job done right the first time!
Eliminate the guess-work by repairing the whole system.
Front end accessory drive components wear together. Replace all of the components for added piece of mind.
A serpentine belt system that is not operating properly will affect other components. Many of your car’s systems are driven by the belt system. Keep them all functioning in tip-top shape!
Worn tensioners and idlers can cut belt life in half.

from

$101.99

Engineered specifically for the most problematic drive systems as an improvement over the OE design, Dayco demanding drive kits come in 14 applications that contain all necessary front-end accessory components to ensure a safe, reliable and noise-free belt drive system. Each kit includes up to two serpentine belts, a premium tensioner with flat spring technology and an idler pulley.

Product Features:

Custom engineered to cover 35 million problem drive vehicles in operation
Designed as an improvement over OE to address problematic drive systems
Features a specially designed serpentine belt with specific compounds that mitigate noise

from

$122.99

This Litens Serpentine Belt Drive Component Kit fits 2002-2009 Chev Avalanche,Express,Silverado / GMC Envoy, Savana, Sierra, Yukon / Cadillac Escalade w/4.8/5.3/6.0L. These kits make it easy to maintain your entire front end accessory drive system. Eliminate the need to search for individual parts by purchasing this all-in-one solution. Front end accessory drives require maintenance at specific intervals, and parts should be replaced as part of your regularly scheduled tune-up to ensure your vehicle is at its best. Each kit contains a Litens belt tensioner, Bando serpentine belt, and any necessary idler pulley(s). All required hardware is included for the installation . Application specific instructions are also conveniently included. All parts meet or exceed OE fit, function, and performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$57.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$71.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides optimal performance at prolonged extreme operating temperatures.
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

from

$65.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

The special belt construction eliminates noise, reduces tension loss and solves transmission problems.
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all original equipment manufacturer specifications.
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$45.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$59.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$13.48

DAYCO® ela® belts, also known as “stretch” belts, are specifically designed for 2 to 4 point drives that do not require tensioning. Although these belts may look like standard poly rib belts, they are very different. These specially designed belts have self-tensioning capabilities required by specific original equipment (OE) drives designed for a “stretch” belt. Vehicles that are manufactured with “stretch” belts must replace those belts with “stretch” belts. These belts are not interchangeable with standard constructed belts of the same size. DAYCO® ela® belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the DAYCO® ela® belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. “Stretch” belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve. Dismounting and reusing stretch belts is not recommended. A new belt should be installed anytime one is removed.

Product Features:

Wear resistant EPDM rib material
Highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord
Designed to elongate over the fixed pulley system
Provides the proper tension maintenance Related Documents:

from

$49.49

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular G.M./Isuzu/Hummer tensioner. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. (*O..E Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Note: The dust shield (pulley washer) has been a modified for this aftermarket part. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 Hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$69.99

This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$48.49

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$1.99

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$15.99

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and is similar to the original manufacturers specifications.
Designed to resist electrochemical degradation, which is the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature range: -40 Deg. F to +275 Deg. F (-40 Deg. F (+135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$70.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$49.99

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$29.99

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

Upgrade your 2017 Cadillac Escalade ESV with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2017 Cadillac Escalade ESV, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Belts and Hoses are key to keeping your Escalade ESV functioning at its best. At Advance Auto Parts, we offer a wide selection of 23 Belts and Hoses for the 2017 Cadillac Escalade ESV, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2017 Cadillac Escalade ESV at great prices. Our Belts and Hoses inventory for this model ranges from just $23.99 to $232.99, with an average price of $76.22. Our 23 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2017 Cadillac Escalade ESV without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2017 Cadillac Escalade ESV, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco DriveWorks, and more. Dayco Belts and Hoses start at just $39.99 and boast an impressive 4.5 stars average rating from customers. With 120 customer reviews and counting, our 2017 Cadillac Escalade ESV Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2017 Cadillac Escalade ESV is always ready to roll. We’re committed to providing you with everything you need to keep your Escalade ESV in top shape, all in one place. Start shopping confidently below for your 2017 Cadillac Escalade ESV!

Best-Selling Belt Tensioners for 2017 Cadillac Escalade ESVs

Enhance the driving experience in your Cadillac with 1 quality Belt Tensioner components, starting at $75.99.

show more show less

from

$75.99

This accessory drive tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. This part was designed for the 2014-2019 Chevrolet Silverado / GMC Sierra,Yukon/Cadillac Escalade with 4.3/5.3/6.2L. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part. This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a lift-lug feature for ease of installation, heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included

Top Picks for 2017 Cadillac Escalade ESV Fuel Hoses

Upgrade Cadillac Escalade ESVs with top-quality Fuel Hoses parts, including 2 OEM and aftermarket selections for your 2017 model.

show more show less

from

$49.99

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$29.99

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

In-Demand Heater Hoses for 2017 Cadillac Escalade ESVs

Select from 5 premium Heater Hoses parts for your 2017 Cadillac Escalade ESV, with prices ranging from $49.99 to $128.99.

show more show less

from

$128.99

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$59.99

Has all the quality features of Gates molded coolant hose and is similar to the original manufacturers specifications.
Designed to resist electrochemical degradation, which is the leading cause of hose failure
EPDM tube, synthetic fiber reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature range: -40 Deg. F to +275 Deg. F (-40 Deg. F (+135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$86.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$74.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$49.99

MOLDED HTR HOSE

Most Sold 2017 Cadillac Escalade ESV Serpentine and V Belts

Explore our best-selling Cadillac parts for the 2017 Escalade ESV among 8 OEM and aftermarket options starting from $23.99.

show more show less

from

$23.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$39.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$35.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$33.99

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$34.99

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$45.99

The patented material provides optimal performance at prolonged extreme operating temperatures.
Crack and wear resistant construction, even in extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
Troubleshooting designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$232.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads & temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety.
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair

Top-Rated Belts and Hoses Brands For Your 2017 Cadillac Escalade ESV

Shop for the best-rated brands offering Belts and Hoses and other products for your 2017 Cadillac Escalade ESVs. Below you’ll find some of our best rated Belts and Hoses from Dayco and DriveWorks, and more. Belts and Hoses from these brands that fit a 2017 Escalade ESV start at just $23.99 and are rated as high as 4.5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2017 Cadillac Escalade ESV Belts and Hoses

When it comes to maintaining or upgrading your 2017 Cadillac Escalade ESV, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2017 Cadillac Escalade ESV. With over 1 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99. Plus, with over 8 customer reviews and an average rating of 4.5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $39.99

(8)

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count

“.”

Popular DriveWorks 2017 Cadillac Escalade ESV Belts and Hoses

DriveWorks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2017 Cadillac Escalade ESV owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 2017 Escalade ESV, Advance Auto Parts carries a full inventory of 1 DriveWorks Belts and Hoses. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these DriveWorks Belts and Hoses range up to $23.99, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $23.99

(7)

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count

“Correct part with a smile 😃”

FAQs for 2017 Cadillac Escalade ESV Belts and Hoses

Which Belts and Hoses are best-sellers for 2017 Cadillac Escalade ESVs?

Out of 23 Belts and Hoses that fit 2017 Cadillac Escalade ESVs, the following parts are the top sellers:

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (12482995) – $35.99
Accessory Drive Belt Tensioner – Original Equipment Quality (11692467) – $75.99
Ela Poly Rib Belt (10703273) – $33.99

What’s the price range for 2017 Cadillac Escalade ESV Belts and Hoses?

Belts and Hose prices for the 2017 Cadillac Escalade ESV start at $23.99 and go up to $232.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2017 Cadillac Escalade ESV?

The average price for Belts and Hoses for the 2017 Cadillac Escalade ESV is $76.22. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Cadillac Escalade ESV model years?

Yes, we currently carry Belts and Hoses for 20 model years of Cadillac Escalade ESVs between 2003 and 2024. Belts and Hoses are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Belts and Hoses for my 2017 Cadillac Escalade ESV?

The cheapest 2017 Cadillac Escalade ESV Belts and Hoses we carry in stock are:

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (3340104) – $23.99
Driver Side Positive Crankcase Ventilation (PCV) Tube (50072214) – $27.99
High Pressure Fuel Line (50216954) – $29.99
Ela Poly Rib Belt (10703273) – $33.99
Stretch Serpentine Belt; 30.43 Long, 3 Rib Count, Zip Tie Required (12482937) – $34.99

What are the top-rated Belts and Hoses that fit the 2017 Cadillac Escalade ESV?

Out of 120 reviews by customers, our 2017 Cadillac Escalade ESV Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2017 Cadillac Escalade ESV and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (3340104) – $23.99
- Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (3290135) – $39.99

What types of Belts and Hoses do you sell for my 2017 Cadillac Escalade ESV?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2017 Cadillac Escalade ESV:

Can I get help with 2017 Cadillac Escalade ESV Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Belts and Hoses and more.

What is your return policy for Cadillac Escalade ESV Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Cadillac Escalade ESV Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2017 Cadillac Escalade ESV Belts and Hoses

Gates – Premium Molded Coolant Hose (Part No.22436)

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-738)

GM Genuine Parts – Positive Crankcase Ventilation Tube (Part No.19435538)

GM Genuine Parts – Driver Side Positive Crankcase Ventilation (PCV) Tube (Part No.12670791)

Dorman – Engine Oil Cooler Line (Part No.625-168)

Dorman – Engine Oil Cooler Line Assembly (Part No.625-340)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 38.5" Long, 1.56" Diameter (Part No.E72776)

Gates – Premium Modular Coolant Hose (Part No.24338)

Litens – Kit de courroie d’entrainement accessoire (Part No.LV999034A)

Dayco – Serpentine Demanding Drive Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.D60923K1)

Litens – Serpentine Belt Drive Component Kit (Part No.LV999033B)

Dayco – Poly Rib Belt Serpentine Belt; 94.09 Long, 6 Rib Count (Part No.5060940)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060747HD)

Gates – Micro-V Serpentine Drive Belt (Part No.K060930)

Dayco – Poly Rib Belt Serpentine Belt; 93.5 Long, 6 Rib Count (Part No.5060935)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060935HD)

Dayco – Dayco, Drive Belt (Part No.W10001221621DAY)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999033A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999366A)

Dayco – Automatic Belt Tensioner (Part No.89258)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Gates – ThermalPro Premium Molded Heater Hose (Part No.18623)

Dorman – Molded Heater Hose: Rubber/Plastic (Part No.626-111)

Dorman – High Pressure Fuel Line (Part No.904-965)

Dorman – High Pressure Fuel Line (Part No.904-966)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999545A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.31" Diameter (Part No.E72775)

Dorman – Engine Heater Hose Assembly (OE Fix) (Part No.626-738)

Dorman – High Pressure Fuel Line (Part No.904-965)

Dorman – High Pressure Fuel Line (Part No.904-966)

Gates – Premium Molded Heater Hose (Part No.12118)

Gates – Premium Molded Heater Hose (Part No.12117)

Dorman – Engine Heater Hose Assembly (Part No.626-696)

Dorman – Engine Heater Hose Assembly (Part No.626-694)

Dayco – MOLDED HTR HOSE (Part No.80302)

Driveworks – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.715K6)

Dayco – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.5060715)

Dayco – Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (Part No.4PK888EE)

Dayco – Ela Poly Rib Belt (Part No.E030296)

Dayco – Stretch Serpentine Belt; 30.43 Long, 3 Rib Count, Zip Tie Required (Part No.3PK773EE)

Yukon Gear – Seal Puller Tool (Part No.56063)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060714HD)

Dayco – Serpentine Belt Kit With 3 Belts, Tensioner, 4-Piece Set (Part No.5060715K1)