2017 Audi Q5 Steering and Chassis Parts

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

• Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
• Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
• Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
• Durably designed – additional coatings offer long-lasting rust and corrosion resistance

CNTRL ARM W BALL JT

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Protects Rack & Pinion surfaces from contamination
• Hardware included

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Manufactured using premium materials
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit..

Product Features:

• Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
• Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
• Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
• Corrosion resistant – salt spray testing and premium coating help ensure future longevity

Stabilizer Bar Link

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Improves upon OE designs
• Quiet, dependable operation
• Provides like-new steering, ease of installation and longer life
• Incorporates proven design and engineering features

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Manufactured to meet or exceed OE specifications

The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium aftermarket replacement
• Manufactured to meet or exceed OE specifications

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Restores vehicle handling
• Restores OE alignment
• Reduces tire wear
• Improves steering response

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

• OE expertise and quality
• Precision manufactured housing and components
• Corrosion protection
• Permanently attached boot
• One-piece forged housing for easier steering

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:

• OE matched design for Form, Fit, and Function
• Advanced corrosion-resistant electro-coating to reduce rust
• Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
• Hex formed studs &/or wrench flats for ease of installation
• Hardware included for easier installation (where applicable)

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Polished Stud ball provides low socket torque.
• Stud design is optimized to provide ideal stud swing and strength for each application.
• Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• Easy to install.
• Construction and design validated by MOOG engineers
• Restores like-new steering and handling
• Designed to meet or exceed original equipment performance
• Broad coverage for foreign and domestic applications
• Engineered to provide long life and dependability

Delphi ball joints adhere to global OE technical requirements and undergo testing focused on strength and durability performance, safety critical tests for a safer driving experience. The ball joint push out test measures the force required to push out / remove the ball-pin from the housing. It is an important safety check to help ensure the part can withstand forces applied to the vehicle suspension system in real road conditions. The ball joint pull out test measures the force required to pull the ball-pin out from the housing. If the force required to remove the ball-pin is below the OE spec, there is a risk the joint could fail during normal driving conditions causing the vehicle to lose directional control. Additionally, Delphi’s new dust cover design features an improved Chloroprene Rubber (CR) formula that helps maintain its durability even in extreme temperatures, helping to protect the internal components and support the continued free movement of the ball joint.

Product Features:

• One of the industry leading ranges with global application coverage.
• Designed, engineered and manufactured to OE quality standards based on more than 100 years of experience in the design and manufacture of OE steering systems.
• First To Market parts (for vehicles still covered by manufacturers warranty)

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Heat treated components
• Dust seal to prevent contamination
• Restores vehicle handling
• Restores OE alignment

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:

• Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
• Low friction plastic bearings that enhance damping and reliability
• Manufactured using forged or cold formed steel
• Two-seat design is standard, and eliminates the need for a spring
• Top of the ball pins are polished
• Salt Spray Test (240hrs)
• Dynamic Test and Elasticity Test
• Original Equipment quality hardware installation accessories
• Acoustic measurements to ensure driver comfort
• Strength tests for durability

The Meyle Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

• OE-Equivalent and direct fit application
• Reduces squeaks, rattles, and vibration noise
• Resistant to oil and other contaminants
• Meets or exceeds OEM specifications

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
• EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
• Inner sleeve is phosphate coated for corrosion protection