2016 Toyota Highlander Catalytic Converters

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592534. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2014-2015 Toyota Highlander 3.5L. MagnaFlow 5592534 includes (4) Nuts, (4) Flat Washers, (1) Donut Gasket. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 52017. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52017 includes (1) Flat Ring Gasket, (1) Flange Gasket, (2) Bolts, (3) Nuts and interchanges with OE parts 17150-0P220, 17150-31160, 17150-31380, 17150-31720, 17150-31850. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Simplifies installation with essential gaskets and hardware being included in the box
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49507. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2003 Lexus RX300 3.0L & 2001-2003 Toyota Highlander 3.0L. MagnaFlow 49507 includes (2) Bolts, (2) Nuts, (4) Flat Washers, (1) Donut Gasket, (2) Flat Ring Gaskets and interchanges with OE parts 17410-20201, 17410-20390. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 459005. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges and manifolds for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT : For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN : Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES : OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE : Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN : Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE : Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592907. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5592907 interchanges with OE parts 17420-0A270, 17420-0P070, 17420-0P150, 17420-0P220, 17420-20350, 17420-20400, 17420-31140, 17420-31180. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

• Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
• Convenient kit – includes gaskets and downpipe hardware to simplify installation
• Durable construction -manufactured within strict tolerances for reliable longevity
• Trustworthy value – backed by team of engineers and quality control experts in the United States

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52536. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2014-2016 Toyota Highlander 3.5L. MagnaFlow 52536 interchanges with OE parts 17420-0P371, 17420-0P372. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52534. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2014-2016 Toyota Highlander 3.5L. MagnaFlow 52534 includes (1) Donut Gasket, (4) Flat Washers, (4) Nuts and interchanges with OE parts 17420-0P360. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges and manifolds for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges and manifolds for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN : Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE : Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Semi-Direct-Fit Catalytic Converter 51318. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2003 Lexus RX300 3.0L & 2001-2003 Toyota Highlander 3.0L. MagnaFlow 51318 includes (1) Donut Gasket and interchanges with OE parts 17420-20130, 17420-20250, 17420-20290. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49907. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 49907 interchanges with OE parts 17420-0A270, 17420-0P070, 17420-0P150, 17420-0P220, 17420-20350, 17420-20400, 17420-31140, 17420-31180. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93259. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 1999-2003 Lexus RX300 3.0L & 2001-2003 Toyota Highlander 3.0L. MagnaFlow 93259 includes (2) Flat Ring Gaskets and interchanges with OE parts 18450-20110. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5592305. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Durable 308 stainless steel MIG welds
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 280096. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2017-2022 Toyota Highlander 3.5L. MagnaFlow 280096 includes (2) Bolts, (1) Donut Gasket, (2) Nuts and interchanges with OE parts 17420-0P481, 17420-0P482. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges and manifolds for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.