Name: Sway Bar Link
Brand: Whiteline
SKU: KLC231
Price: 165.99 USD

from

$165.99

The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Featuring premium anodized alloy materials, providing a long-lasting protective barrier to corrosion and wear but they look great too.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$292.99

A must for lowered vehicles, Whiteline roll centre and bump steer correction kits are designed to correct roll-centre geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip and cornering speeds.

Product Features:

Articulation voids deliver necessary suspension articulation and/or compression under loads.
Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Articulation voids deliver necessary suspension articulation and/or compression under loads.

from

$48.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.

from

$182.99

Cntrl Arm w Ball Jt

from

$49.49

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$157.99

Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Product Features:

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$289.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 26mm 2 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$318.99

Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:

Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.

from

$20.29

DRIVEWORKS Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. DRIVEWORKS Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. DRIVEWORKS Chassis parts have been engineered and manufactured under the proven quality systems. DRIVEWORKS Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.

Product Features:

Designed to meet OE Form, Fit, and Function.
Performance tested to ensure durability and reduce tire wear.
Precision engineered for improved ride and steering response.
Hardware included for ease of installation (where applicable)

from

$46.99

Not your typical remove and replace bushing kit but simple installation means great for the DIYer’s. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as ‘lost motion’ of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

Product Features:

Inserts are designed to work with the original factory bushing rather than replacing it.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Specially bonded design for optimised strength typically required in high load bearing applications.

from

$148.99

Subaru’s rear subframe is mounted on rubber voided bushings which allows for a significant amount of compliance/movement in the frame during high cornering loads. Whiteline’s low compliance polymer bushings eliminate this condition by positively locking in the frame position and removing the ‘lateral walking’ found when using high grip tires. The polymer bushing design has soft ‘stand-off’ buffers on the top and bottom surfaces of the bushing to allow slight vertical bushing movement of the subframe to eliminate that ‘rock-solid’ NVH feel and cushion against minor bumps and allow solid positive location when high torque and power is applied.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$434.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can solve excessive tire wear and steering issues
Provides like-new steering, ease of installation and longer life
Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features

from

$94.99

Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OEM mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.

Product Features:

Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$29.99

Camber Bolt Kit

from

$48.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Protects Rack & Pinion surfaces from contamination
Hardware included

from

$54.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Designed to meet or exceed original equipment performance

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$14.49

Covered in black Hypalon

from

$42.99

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Forged housing provides exceptional strength and durability
Oxidation film on the surface of the metal protects against corrosion
Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

from

$34.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$38.92

Every Sankei 555 ball joint is engineered to restore the handling of your vehicle to original equipment condition.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$50.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Pre-applied threadlocker keeps fasteners from loosening due to vibration