2016 Porsche 911 Brake Parts

Essential Brake Parts for 2016 Porsche 911s

TRW – Automotive OE Replacement Brake Pads (Part No.N1010413206TRW)

Automotive OE Replacement Brake Pads

from

$289.29
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD994)

Brake Pads: Semi-metallic, Long Life and Quiet

from

$51.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – Rear (4-Pad Set) (Part No.GMKD993)

Semi-Metallic Brake Pads - Rear (4-Pad Set)

from

$68.99
Carquest Wearever Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

APA/URO Parts – Brake Hardware Kit (Part No.N1061188309APA)

Brake Hardware Kit

from

$67.17
Brake Hardware Kit

ATE – Brake Adjuster (Part No.N2050433495ATE)

Brake Adjuster

from

$14.66
Brake Adjuster

Original Equipment – Brake Caliper Bolt (Part No.N1041439289OEA)

Brake Caliper Bolt

from

$9.12
Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with an Original Equipment Disc Brake Caliper Bolt Kit. The Original Equipment Brake Caliper Bolts is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality
  • Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
  • Pre-coated with thread lock to prevent loosening
See More

Original Equipment – Brake Caliper Bolts (Part No.N1041439260OEA)

Brake Caliper Bolts

from

$6.77
Eliminate the replacement of costly steering knuckles, as well as time spent drilling, tapping or rethreading the mounting holes, with an Original Equipment Disc Brake Caliper Bolt Kit. The Original Equipment Brake Caliper Bolts is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE Quality
  • Save time, money and labor by replacing only the Disc Brake Caliper Bolt – instead of the entire caliper bracket or knuckle
  • Pre-coated with thread lock to prevent loosening
See More

Carquest Premium Gold – Brake Pads: Semi-metallic, Long Life and Quiet (Part No.GMKD1431)

Brake Pads: Semi-metallic, Long Life and Quiet

from

$46.99
Carquest Premium Gold brake pads are original equipment (O.E.) replacement brake pads designed for consistent, quiet and clean braking. Our brake pads are engineered by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium Gold brake pads utilize application-specific friction formulations that provide extended pad life and cleaner wheels. These brake pads also feature OE-designed slots and chamfers for consistent performance. To prevent noise, our Carquest Premium Gold brake pads also utilize a multi-layer shim and are supplied with new brake hardware (most applications-see fitment notes). Carquest Premium Gold brake pads are the best choice when looking for brake pads that meet or exceed the OE stopping performance.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-917)

Z16 Low-Dust Ceramic Brake Pads

from

$50.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

TRW – Automotive OE Replacement Brake Pads (Part No.N1010312396TRW)

Automotive OE Replacement Brake Pads

from

$360.10
This part matches Original Equipment (OE) quality specifications which means that it is at least as good if not better than the original part the manufacturer supplied the car with. TRW has introduced Cotec – an innovative coating for its brake pads. Independent tests have proven that Cotec achieves significantly shorter stopping distances than the brake pads of major competitors or even OE, for the first stops after leaving a garage following a brake pad change. In the normal bedding in process there is a period, known as the green behavior of the pad, which occurs at the start of the bedding in process where the friction co-efficient is lower than usual. Drivers can find it difficult to adjust to the difference in performance during these first stops. TRW Cotec brake pads address this issue by improving the contact between the brake disc and pad. The friction material is the most important part of a brake pad. All TRW’s brake pads contain the optimum mix of raw materials from rubber to graphite. TRW has made a significant investment over the years to ensure that we have the perfect mix – and we make it in-house. The ingredients ensure a stable friction coefficient and the safest braking performance in all temperatures, at all speeds and under all conditions. The backing plates used by TRW are designed, patented and produced in-house to OE specification. They are fitted to the friction material with a unique adhesive compound which can withstand high temperatures and resists extremely high shear strengths. TRW places great emphasis on noise reduction and its brake pads are fitted with high quality shims which act as a damper between the friction material and the brake caliper. TRW friction components are not only tested in our NVH (noise vibration harshness) laboratories and also on the road.

Product Features:
  • Include the OE specified shims.
  • Low noise and reduced vibrations.
  • Formulated to OE Specifications.
  • Superior friction qualities.
  • Organic blended compound.
See More

ATE – Original OE Formuld Brake Pad Set (Part No.N101025379ATE)

Original OE Formuld Brake Pad Set

from

$29.74
ATE Original brake pads provide quality friction just like the OE pads they replace, providing customer-pleasing brake performance. With the best mixture of materials on the market and a production process which emphasizes quality all the way through, original ATE brake pads represent the state-of-the-art. In order to prevent noise during braking, highly effective primary and secondary measures are both used on brake pads. Primary measures act directly on the point of friction. Here, the main issue is optimization of the materials used for the relevant parts. In many cases, ATE uses the most effective variant and the best primary measure for noise suppression in the industry: the intermediate layer or underlayer! On the other hand, secondary measures are intended to prevent the structure-borne sound which is produced from reaching the ear of the driver and pedestrians. Secondary measures can generally be divided into four groups: damping plates, damping foils, paints and greases. ATE works with over 150 different mixtures of friction material to ensure that the optimal result is always achieved for any particular application. The friction materials are always being refined and developed for this purpose. The pad material consists of various components which each fulfill different functions during braking

Product Features:
  • OE engineered brake system technology assures optimum fit and performance
  • Advanced friction vehicle specific formulations
  • Reduced dusting and extend pad life
  • Application matched premium quality friction grade
  • Underlayer design helps reduce noise, vibration and harshness
  • Shims, chamfers, slots, wear sensors and other premium features included Original ATE Brake pads – Presentation
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1389)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$61.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100052819ZIC)

Coat-Z Brake Disc (Rotor)

from

$193.78
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Sebro – Coated OE Replacement Brake Rotor (Part No.N1000437782SEB)

Coated OE Replacement Brake Rotor

from

$204.71
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Original Equipment – Brake Disc (Rotor) (Part No.N10001883618OEA)

Brake Disc (Rotor)

from

$639.95
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000474851OEA)

Brake Disc (Rotor)

from

$901.31
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Sebro – Coated Brake Rotor (Part No.N100052818SEB)

Coated Brake Rotor

from

$177.19
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Sebro – Coated OE Replacement Brake Rotor (Part No.N1000439642SEB)

Coated OE Replacement Brake Rotor

from

$285.29
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000439643OEA)

Brake Disc (Rotor)

from

$303.30
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Bosch – QuietCast Premium Brake Disc (Rotor) (Part No.N100020721BOS)

QuietCast Premium Brake Disc (Rotor)

from

$94.94
Bosch rotors utilize innovative materials that ensure the very highest quality – and prevent brake judder, noise, vibration and harshness. Bosch QuietCast Premium Disc Brake Rotors utilize vehicle specific castings. The heat flow casting process produces superior G3000, GG20, GG15 and HC (high carbon) casting. Bosch castings provide strength and durability not found in competitive product. While competitors may provide a low cost product which helps save money, their castings can crack and provide poor durability. Bosch QuietCast provides consistent, safe and long lasting performance. Alutherm 80 Coating – Bi-metal aluminum and zinc clean-look coating/Alutherm 80 extends the life of the rotor and provides a clean look for today’s open wheels

Product Features:
  • OE-Equivalent and a direct fit replacement
  • Prevent rust and corrosion with clear-look coating protection
  • Provide a clean look for today’s open-wheeled vehicles
  • Are 100% balanced for smooth operation
  • Factory-engraved edge code and minimum thickness specifications Bosch QuietCast Brake Rotors Brochure
See More

Sebro – Coated Brake Rotor (Part No.N100022426SEB)

Coated Brake Rotor

from

$132.53
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200908)

Disc Brake Rotor Meets or Exceeds OE Design

from

$103.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Sebro – Brake Disc (Part No.N1000439663SEB)

Brake Disc

from

$238.65
Brake Disc

Original Equipment – Brake Disc (Rotor) (Part No.N1000439667OEA)

Brake Disc (Rotor)

from

$248.25
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH200909)

Disc Brake Rotor Meets or Exceeds OE Design

from

$103.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000377998OEA)

Brake Disc (Rotor)

from

$236.41
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000407221WBC)

Run-True Metallurgic-Gray Coated Brake Disc (Rotor)

from

$122.60
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
  • High metallurgical and machining standard to improve stopping distances
  • Produced to match OE design fitment – G 3000 gray iron
  • Mill balanced
  • TS16949 certified
  • Non-directional finish provides smooth vibration free performance
  • No need for machining prior to installation
  • Durable Metallurgic-Gray finish to all outward non-friction surfaces
  • Metallurgic-Gray anti-rust protection to help maintain a clean appearance
  • Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
  • Designed to minimize brake fade and extend pad and rotor life
  • 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
See More

Sebro – Coated Brake Rotor (Part No.N100022425SEB)

Coated Brake Rotor

from

$131.08
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Upgrade your 2016 Porsche 911 with Top-Quality Brake Parts

When it comes to maintaining or upgrading your 2016 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Brake Parts are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Brake Parts for the 2016 Porsche 911, designed to meet your needs without breaking the bank. From Brake Rotors and Drum replacements to Parking Brakes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Brake Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Brake Parts for your 2016 Porsche 911 at great prices. Our Brake Parts inventory for this model ranges from just $6.77 to $901.31, with an average price of $259.51. Our 38 Brake Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2016 Porsche 911 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Brake Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place. Start shopping confidently below for your 2016 Porsche 911!

Best-Selling Brake Rotors and Drums for 2016 Porsche 911s

Enhance the driving experience in your Porsche with 25 quality Brake Rotors and Drum components, starting at $112.99.

Sebro – Coated OE Replacement Brake Rotor (Part No.N1000437784SEB)

Coated OE Replacement Brake Rotor

from

$201.47
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Sebro – Coated OE Replacement Brake Rotor (Part No.N1000437782SEB)

Coated OE Replacement Brake Rotor

from

$204.71
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Carquest Wearever – Disc Brake Rotor Meets or Exceeds OE Design (Part No.YH424963)

Disc Brake Rotor Meets or Exceeds OE Design

from

$112.99
Carquest Premium painted brake rotors meet or exceed original equipment (O.E.) specifications, delivering superior stopping power with proper harmonic design and non-directional finish that eliminate noise. Carquest Premium painted rotors feature RotorShield, a rust-inhibiting barrier that provides up to 5 times more protection than non-painted rotors. The RotorShield barrier is applied to the rotor hat to protect from unsightly rust and help maintain a like-new appearance. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of the pads and rotors. Carquest Premium painted brake rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to prevent warping
  • Air gap eliminates brake fade and increases pad life
  • Non-Directional finish decreases break-in time
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000474851OEA)

Brake Disc (Rotor)

from

$901.31
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000474853OEA)

Brake Disc (Rotor)

from

$901.31
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000474861OEA)

Brake Disc (Rotor)

from

$833.70
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000474859OEA)

Brake Disc (Rotor)

from

$830.07
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Sebro – Brake Disc (Part No.N10001673283SEB)

Brake Disc

from

$753.38
Brake Disc

Sebro – Brake Disc (Part No.N10001606413SEB)

Brake Disc

from

$750.70
Brake Disc

Sebro – Brake Disc (Part No.N10003254866SEB)

Brake Disc

from

$738.40
Brake Disc

Sebro – Brake Disc (Part No.N1000474853SEB)

Brake Disc

from

$723.09
Brake Disc

Sebro – Brake Disc (Part No.N10002533280SEB)

Brake Disc

from

$674.07
Brake Disc

Original Equipment – Brake Disc (Rotor) (Part No.N10001333571OEA)

Brake Disc (Rotor)

from

$659.62
The Original Equipment brand brake disc is supplied by the ORIGINAL vehicle brake manufacturers.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N10001883618OEA)

Brake Disc (Rotor)

from

$639.95
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000439643OEA)

Brake Disc (Rotor)

from

$303.30
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Original Equipment – Brake Disc (Rotor) (Part No.N1000439642OEA)

Brake Disc (Rotor)

from

$294.92
The Original Equipment brand brake disc is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:
  • OE-Equivalent and Direct fit Application
  • made of special cast iron with high carbon content
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Contains the same high quality craftsmanship as the original equipment manufacturer.
  • Guarantees OE quality performance, durability and fitment.
See More

Sebro – Coated OE Replacement Brake Rotor (Part No.N1000439642SEB)

Coated OE Replacement Brake Rotor

from

$285.29
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Sebro – Coated OE Replacement Brake Rotor (Part No.N1000439643SEB)

Coated OE Replacement Brake Rotor

from

$280.26
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Sebro – Brake Disc (Part No.N1000439663SEB)

Brake Disc

from

$238.65
Brake Disc

Sebro – Brake Disc (Part No.N1000439664SEB)

Brake Disc

from

$237.19
Brake Disc

Sebro – Coated Brake Rotor (Part No.N1000407220SEB)

Coated Brake Rotor

from

$223.95
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Sebro – Coated Brake Rotor (Part No.N1000407221SEB)

Coated Brake Rotor

from

$221.18
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.

Product Features:
  • OE-Equivalent and Direct fit Application
  • high carbon content disc
  • Protective coating that resists corrosion
  • Provides a higher friction coefficient.
  • Resistant to vibrations and noise.
  • Improved thermal efficiency
See More

Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000407221ZIC)

Coat-Z Brake Disc (Rotor)

from

$200.97
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000407220ZIC)

Coat-Z Brake Disc (Rotor)

from

$194.86
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:
  • Coat-Z protective anti-corrosion coating
  • No formation of rust at the hub and herewith improved visual appearance
  • Immediate functional capability without removal of the coating before mounting
  • Excellent deceleration action and no distortion of friction ring at high temperatures
  • Substantial weight saving and therefore less unsprung mass
  • Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
  • Hot spots prevented by optimized design of ventilation channels
  • 1:1 exchange of original disc possible
  • Not subject to registration: general ABE certification supplied with disc
  • No conversion required for brake tuning
See More

WBR Coated – Run-True Metallurgic-Gray Coated Brake Disc (Rotor) (Part No.N1000407221WBC)

Run-True Metallurgic-Gray Coated Brake Disc (Rotor)

from

$122.60
WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:
  • High metallurgical and machining standard to improve stopping distances
  • Produced to match OE design fitment – G 3000 gray iron
  • Mill balanced
  • TS16949 certified
  • Non-directional finish provides smooth vibration free performance
  • No need for machining prior to installation
  • Durable Metallurgic-Gray finish to all outward non-friction surfaces
  • Metallurgic-Gray anti-rust protection to help maintain a clean appearance
  • Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
  • Designed to minimize brake fade and extend pad and rotor life
  • 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins
See More

Most Popular 2016 Porsche 911 Parking Brakes

Customize your Porsche with 1 Parking Brakes products like Parking Brake Actuators, all priced under $554.06.

Worldpac – PARKING BRAKE ACTUAT (Part No.N50074189063APA)

PARKING BRAKE ACTUAT

from

$554.06
PARKING BRAKE ACTUAT

Top Picks for 2016 Porsche 911 Brake Calipers

Upgrade Porsche 911s with top-quality Brake Calipers parts, including 1 OEM and aftermarket selections for your 2016 model.

Original Equipment – Brake Caliper Bolt (Part No.N10411360145OEA)

Brake Caliper Bolt

from

$6.77
Brake Caliper Bolt

In-Demand Brake Lines and Fittings for 2016 Porsche 911s

Select from 1 premium Brake Lines and Fittings parts for your 2016 Porsche 911.

ATE – Brake Adjuster (Part No.N2050433495ATE)

Brake Adjuster

from

$14.66
Brake Adjuster

Most Sold 2016 Porsche 911 Brake Pads and Shoes

Explore our best-selling Porsche parts for the 2016 911 among 9 OEM and aftermarket options starting from $43.49.

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1741)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$70.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1925)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$67.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium hardware for easy installation
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1740)

Z16 Low-Dust Ceramic Brake Pads

from

$66.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1741)

Z16 Low-Dust Ceramic Brake Pads

from

$64.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1925)

Z16 Low-Dust Ceramic Brake Pads

from

$61.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

PowerStop – Z17 Evolution Ceramic Brake Pads with Hardware (Part No.17-1389)

Z17 Evolution Ceramic Brake Pads with Hardware

from

$61.99
The Z17 Evolution Ceramic Brake Pad and Hardware set is a stock replacement brake pad set for your daily driven vehicle. The ceramic pads’ low-dust formula is validated through on-vehicle 3rd party tests in the USA to keep your wheels looking like new. The pads also feature dual-layer high-temperature rubberized shims that insulate noise for virtually silent braking. If you’re looking to refresh the look and braking performance of your old, worn-out brakes, look no further. Say hello to a smooth, quiet commute with Z17 Evolution Ceramic Brake Pads.

Product Features:
  • PowerStop Z17 Evolution Clean Ride Ceramic brake pads are engineered for noise free braking
  • Z17 Evolution brake pads are manufactured under TS16949 standards to OEM specifications including chamfers and slots
  • The pad surfaces are thermal scorched for fast break-in
  • Includes premium stainless-steel hardware for hassle free installation
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Includes Premium stainless-steel hardware for easy installation
See More

PowerStop – Z16 Low-Dust Ceramic Brake Pads (Part No.16-1389)

Z16 Low-Dust Ceramic Brake Pads

from

$49.99
The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:
  • Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
  • Positive mold technology for consistent wear and performance
  • Thermal scorched pad surface for a fast break-in
  • Chamfered and slotted to ensure noise-free braking
  • Powder coated backing plate resists rust and corrosion to provide extended pad life
  • Multi-Layer rubberized shims provide virtually noise-free braking
See More

Autopart International Inc – Brake Pad Set (Part No.N10101957179API)

Brake Pad Set

from

$48.96
Brake Pad Set

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD1925)

Brake Pads: Reliable and Dependable Stopping

from

$43.49
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
See More

FAQs for 2016 Porsche 911 Brake Parts

Which Brake Parts are best-sellers for 2016 Porsche 911s?

Out of 38 Brake Parts that fit 2016 Porsche 911s, the following parts are the top sellers:

What’s the price range for 2016 Porsche 911 Brake Parts?

Brake Part prices for the 2016 Porsche 911 start at $6.77 and go up to $901.31 for the most premium parts.

What’s the average price of a Brake Part for a 2016 Porsche 911?

The average price for Brake Parts for the 2016 Porsche 911 is $259.51. Keep in mind the variety of part types within our Brake Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Brake Parts for other Porsche 911 model years?

Yes, we currently carry Brake Parts for 59 model years of Porsche 911s between 1965 and 2024. Brake Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2015, 2014, and 2013.

What are the cheapest Brake Parts for my 2016 Porsche 911?

The cheapest 2016 Porsche 911 Brake Parts we carry in stock are:

What types of Brake Parts do you sell for my 2016 Porsche 911?

As of 2/5/25, these are some of the most in-demand types of Brake Parts for a 2016 Porsche 911:

Can I get help with 2016 Porsche 911 Brake Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Brake Parts and more.

What is your return policy for Porsche 911 Brake Parts?

Advance Auto Parts keeps returns simple. For new Porsche 911 Brake Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.