2016 Nissan Titan XD Drivetrains

Essential Drivetrains for 2016 Nissan Titan XDs

EMPI – Axle Shaft Nut (Part No.K4030847146EMP)

Axle Shaft Nut

from

$6.31
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

aFe POWER – Differential Cover (Part No.46-70362)

Differential Cover

from

$381.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. An oil level sight glass and calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover is finished in black powder-coating with machined fins for a distinctive look. 4 Quart Gear Oil Capacity: This cover has about a 4 quart gear oil capacity at the factory fill level, factory cover holds about 3 quarts. Built-in External Fins: Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain/Fill Plug: This system incorporates a magnetic drain and deep reach fill plug that captures loose particles for maximum rear-end protection. Oil Level Sight Glass: Large oil level sight glass with 1/8” NPT calibration plug set to the factory fluid level to eliminate overfilling. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • Constructed of Durable A356 Die Cast Aluminum
  • Reinforcing Ribs and Black Powder coating w/Machined Fins
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Large Oil Level Sight Glass w/ Calibration Plug
See More

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55482)

DIFFERENTIAL GASKET

from

$38.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

National – Multi Purpose Seal (Part No.711033)

Multi Purpose Seal

from

$38.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Driveworks – Tapered Roller Bearing (Part No.S-A-42)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

Tapered Roller Bearing

from

$6.29
Product Features:
  • Brand may vary by location
See More

Dorman – Spindle Nut M24-1.50 Hex 32mm (Sold by each) (Part No.615-223)

Spindle Nut M24-1.50 Hex 32mm (Sold by each)

from

$7.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

from

$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-517)

Rear Drive Shaft: Greaseable, Adjustable

from

$1445.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – REAR DRIVESHAFT (Part No.986-591)

REAR DRIVESHAFT

from

$1626.00
REAR DRIVESHAFT

Dorman – Rear Driveshaft Assembly (Part No.986-682)

Rear Driveshaft Assembly

from

$1066.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

National – Multi Purpose Seal (Part No.710694)

Multi Purpose Seal

from

$23.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Upgrade your 2016 Nissan Titan XD with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 2016 Nissan Titan XD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Drivetrains are key to keeping your Titan XD functioning at its best. At Advance Auto Parts, we offer a wide selection of 32 Drivetrains for the 2016 Nissan Titan XD, designed to meet your needs without breaking the bank. From Universal Joint replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2016 Nissan Titan XD at great prices. Our Drivetrains inventory for this model ranges from just $2.02 to $1,445.99, with an average price of $66.28. Our 32 Drivetrains in stock come from 12 trusted brands, so you’re sure to find the right part for your 2016 Nissan Titan XD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Nissan Titan XD, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline, Spicer, Moog, and more. Valvoline Drivetrains start at just $12.49 and boast an impressive 5 stars average rating from customers. Spicer and Moog also bring quality to the table, with Drivetrains available starting at $25.99, and at an average 5 stars rating. With 2,792 customer reviews and counting, our 2016 Nissan Titan XD Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Nissan Titan XD is always ready to roll. We’re committed to providing you with everything you need to keep your Titan XD in top shape, all in one place. Start shopping confidently below for your 2016 Nissan Titan XD!

Best-Selling Universal Joints for 2016 Nissan Titan XDs

Enhance the driving experience in your Nissan with 9 quality Universal Joint components, starting at $15.99.

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-213X)

Universal Joint

from

$39.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)

Greaseable Premium Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
  • KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Cross forging shape and flash provide easier installation and high strength
See More

Driveworks – Universal Joint (Part No.DW-354)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)

Non-Greaseable Super Strength Universal Joint

from

$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
  • STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)

Greaseable Super Strength Universal Joint

from

$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Driveworks – Universal Joint (Part No.DW-270)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Spicer – Universal Joint (Part No.5-1330X)

Universal Joint

from

$37.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Spicer – Universal Joint (Part No.5-1330-1X)

Universal Joint

from

$36.99
Universal Joint

Most Popular 2016 Nissan Titan XD Transfer Cases

Customize your Nissan with 1 Transfer Cases products like Transfer Case Output Shaft Seals, all priced under $23.29.

National – Multi Purpose Seal (Part No.710694)

Multi Purpose Seal

from

$23.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Top Picks for 2016 Nissan Titan XD Drive Shafts and Axles

Upgrade Nissan Titan XDs with top-quality Drive Shafts and Axles parts, including 9 OEM and aftermarket selections for your 2016 model.

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Spicer – Universal Joint (Part No.5-1410X)

Universal Joint

from

$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.986-517)

Rear Drive Shaft: Greaseable, Adjustable

from

$1445.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Spicer – Universal Joint (Part No.5-1410-1X)

Universal Joint

from

$55.99
Universal Joint

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Dorman – Spindle Nut (Part No.K1002754968DOR)

Spindle Nut

from

$15.78
Spindle Nut

EMPI – Axle Shaft Nut (Part No.K4030847146EMP)

Axle Shaft Nut

from

$6.31
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

In-Demand Spindles for 2016 Nissan Titan XDs

Select from 1 premium Spindles parts for your 2016 Nissan Titan XD.

Dorman – Spindle Nut M24-1.50 Hex 32mm (Sold by each) (Part No.615-223)

Spindle Nut M24-1.50 Hex 32mm (Sold by each)

from

$7.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Most Sold 2016 Nissan Titan XD Differentials

Explore our best-selling Nissan parts for the 2016 Titan XD among 12 OEM and aftermarket options starting from $2.02.

Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Idemitsu – Type TLS Automatic Transmission Fluid – 1 qt (Part No.10106-042K)

Type TLS Automatic Transmission Fluid - 1 qt

from

$11.79
Formulated to meet the specific requirements of Toyota, Lexus, and scion vehicles equipped with conventional (non-CVT) transmissions that require the use of ATF T-IV. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF T-IV is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-603011)

Tapered Roller Bearing

from

$6.29
Product Features:
  • Brand may vary by location
See More

aFe POWER – Differential Cover (Part No.46-70362)

Differential Cover

from

$381.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. An oil level sight glass and calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover is finished in black powder-coating with machined fins for a distinctive look. 4 Quart Gear Oil Capacity: This cover has about a 4 quart gear oil capacity at the factory fill level, factory cover holds about 3 quarts. Built-in External Fins: Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain/Fill Plug: This system incorporates a magnetic drain and deep reach fill plug that captures loose particles for maximum rear-end protection. Oil Level Sight Glass: Large oil level sight glass with 1/8” NPT calibration plug set to the factory fluid level to eliminate overfilling. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • Constructed of Durable A356 Die Cast Aluminum
  • Reinforcing Ribs and Black Powder coating w/Machined Fins
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Large Oil Level Sight Glass w/ Calibration Plug
See More

aFe POWER – Differential Cover (Part No.46-70360)

Differential Cover

from

$319.99
aFe Power’s new rear differential cover brings performance engineering to the protection of your axle’s differential. This differential cover is constructed out of durable A356-T6 cast aluminum with reinforcing ribs for maximum strength. Mounting hardware is included for a hassle-free installation. A calibration plug set to the factory level prevents overfilling of the differential. A magnetic drain plug and a deep reach magnetic fill plug are provided for maximum protection. This cover has a raw finish with machined fins for a distinctive look. 4 Quart Gear Oil Capacity: This cover has about a 4 quart gear oil capacity at the factory fill level, factory cover holds about 3 quarts. Built-in External Fins: Built-in external fins transfer heat from the fluid to the outside air for maximum cooling. Magnetic Drain/Fill Plug: This system incorporates a magnetic drain and deep reach fill plug that captures loose particles for maximum rear-end protection. Oil Level calibration plug: A 1/8″ NPT calibration plug is set to the factory fluid level which eliminates accidental overfilling. When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

Product Features:
  • Constructed of Durable A356-T6 Cast Aluminum
  • Reinforcing Ribs w/ a Raw Finish and Machined Fins
  • Magnetic Drain and Fill Plugs Capture Loose Particles
  • Calibration Plug Set to Factory Fluid Level
See More

National – Multi Purpose Seal (Part No.711033)

Multi Purpose Seal

from

$38.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55482)

DIFFERENTIAL GASKET

from

$38.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Axle Hsg. Cover or Diff. Seal (Part No.RDS 55483)

Axle Hsg. Cover or Diff. Seal

from

$29.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Driveworks – Tapered Roller Bearing (Part No.S-A-42)

Tapered Roller Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart (Part No.VV820)

High Performance Transmission & Differential Gear Oil: Conventional 75W-90, 1 Quart

from

$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.

Product Features:
  • HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
  • EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
  • REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
  • FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
  • SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
See More

Original Equipment – Nut (Part No.Y20021318398OEA)

Nut

from

$2.02
Nut

Top-Rated Drivetrains Brands For Your 2016 Nissan Titan XD

Shop for the best-rated brands offering Drivetrains and other products for your 2016 Nissan Titan XDs. Below you’ll find some of our best rated Drivetrains from Valvoline, Spicer, and Moog, and more. Drivetrains from these brands that fit a 2016 Titan XD start at just $12.49 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2016 Nissan Titan XD Drivetrains

When it comes to maintaining or upgrading your 2016 Nissan Titan XD, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 2016 Nissan Titan XD. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $12.49, with an average price of just $13.49. Plus, with over 2 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from
$14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

“I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
I pu”

Popular Spicer 2016 Nissan Titan XD Drivetrains

Spicer auto parts is one of the highest quality Drivetrain brands in the market. Any 2016 Nissan Titan XD owner should feel confident when installing genuine Spicer parts in their vehicle. To ensure the best fit and performance for your 2016 Titan XD, Advance Auto Parts carries a full inventory of 9 Spicer Drivetrains. Plus you will be keeping your Nissan in peak condition while saving money because prices on these Spicer Drivetrains range from $28.99 to $55.99, plus, with more than 30 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

SPICER U-JOINT
from
$44.99
This product is not rated

SPICER U-JOINT

“”

Universal Joint
from
$37.99
This product is not rated

Universal Joint

“”

Universal Joint
from
$55.99
This product is not rated

Universal Joint

“”

FAQs for 2016 Nissan Titan XD Drivetrains

Which Drivetrains are best-sellers for 2016 Nissan Titan XDs?

Out of 32 Drivetrains that fit 2016 Nissan Titan XDs, the following parts are the top sellers:

What’s the price range for 2016 Nissan Titan XD Drivetrains?

Drivetrain prices for the 2016 Nissan Titan XD start at $2.02 and go up to $1,445.99 for the most premium parts.

What’s the average price of a Drivetrain for a 2016 Nissan Titan XD?

The average price for Drivetrains for the 2016 Nissan Titan XD is $66.28. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Nissan Titan XD model years?

Yes, we currently carry Drivetrains for 8 model years of Nissan Titan XDs between 2017 and 2024. Drivetrains are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2023, and 2024.

What are the cheapest Drivetrains for my 2016 Nissan Titan XD?

The cheapest 2016 Nissan Titan XD Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 2016 Nissan Titan XD?

Out of 2,792 reviews by customers, our 2016 Nissan Titan XD Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2016 Nissan Titan XD and their top-rated products:

What types of Drivetrains do you sell for my 2016 Nissan Titan XD?

As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2016 Nissan Titan XD:

Can I get help with 2016 Nissan Titan XD Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Drivetrains and more.

What is your return policy for Nissan Titan XD Drivetrains?

Advance Auto Parts keeps returns simple. For new Nissan Titan XD Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.