2016 Nissan Titan XD Automotive Accessories
Find Your Specific 2016 Nissan Titan XD Automotive Accessories
Below you will find various in-demand Nissan Automotive Accessories, components and accessories for your 2016 Titan XD. Advance Auto Parts has popular Titan XD parts like Seasonal Accessories, Floor Mats, License Plate Frames and more. You’ll also find aftermarket and OEM Automotive Accessories for other Titan XD model years including
2017,
2018,
2019,
2020,
2021,
2022,
2023,
2024 and more. Select a category of 2016 Nissan Titan XD Automotive Accessories below and start saving instantly.
Popular 2016 Nissan Titan XD Automotive Accessories Categories
Essential Automotive Accessories for 2016 Nissan Titan XDs
Dee Zee – Diesel, 108 Gallon Capacity, 48" W X 24" L X 24" H, Diamond Tread, Aluminum (Part No.DZ91753X)
from
$1438.99
Dee Zee Transfer Tanks – A safe and convenient means for transporting non-flammable liquids. Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature 3 stability baffles, lockable cap, 0.375 Inch drainage plug, and venting coupler. Tanks are intended for private use (non-commercial).
Product Features:
See More
Product Features:
- Specialty Series Transfer Tank
- non Rusting 0.125 Inch Brite Tread Aluminum
- Radius Curve Eliminates Weld Pressure Points
- Includes Cap And Coupler For Venting
- 3 Stability Baffles And Drain Plug
- Mounting Tabs To Secure To The Truck Bed
Dee Zee – 40 Gallon Capacity, Narrow Rectangle Shape, 9.7"L X 56"W X 19"H, Black Steel (Part No.DZ92556NSB)
from
$793.99
Transporting fluids around your property or to the job site can be challenging logistically, especially when trying to fit cargo into your truck bed. If you are looking for a safe and convenient way to transport Non-Flammable fluids while still leaving room in your truck bed for cargo check out the Dee Zee Long Rectangle Transfer Tank. Constructed of rugged high-quality steel with a black powder coat finish to ensure lasting protection. A radius curve design eliminates key welding points making this thing as durable as it is functional. Surging is a major concern when transporting higher volumes of fluids. The effect that fluid can have on your vehicle as it slams from one side of the tank to the other can be down right dangerous when driving. Our Transfer Tank features 3 stability baffles to decrease the effects of fluid sloshing and surging within the tank during transport.
Product Features:
See More
Product Features:
- Protective Black Powder Coat Finish
- Heavy-Duty 14-Gauge Steel
- Radius Curve Eliminates Weld Pressure Points
- 3 Stability Baffles And Drain Plug
- Mounting Tabs To Secure To The Truck Bed
Dee Zee – For Use With Dee Zee Bull Bars, Black, Steel (Part No.DZLPMOUNT)
from
$15.49
Dee Zee Bull Bar Guard License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.
Product Features:
See More
Product Features:
- License Plate Frame Mount
- Made From 2.5 Millimeter Hot Rolled Steel
- Protective Gloss Black Powder Coat Finish
- Attach A License Plate To Your Dee Zee Bull Bar
- Mounts To Underside Of The Center Tube
- Uses 6 Millimeter Threaded Inserts
Covercraft – UVS100 Custom Sunscreen – Silver (Part No.UV11444SV)
from
$81.99
The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.
Product Features:
See More
Product Features:
- Custom fit to the windshield for complete coverage
- Protect the dash and other interior components from damage by the sun
- Reduce the interior temperature of the vehicle on hot days
- The foam core center of the shield acts as an insulator
- Easy to use and store away when not in use
Covercraft – UVS100 Custom Sunscreen – Blue Metallic (Part No.UV11444BL)
from
$81.99
The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.
Product Features:
See More
Product Features:
- Custom fit to the windshield for complete coverage
- Protect the dash and other interior components from damage by the sun
- Reduce the interior temperature of the vehicle on hot days
- The foam core center of the shield acts as an insulator
- Easy to use and store away when not in use
WeatherTech – Molded Fit, Raised Channels With A Lower Reservoir, Cocoa, 2 Piece (Part No.479081)
from
$153.99
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.
Product Features:
See More
Product Features:
- Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
- Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
- Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
- A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
- Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
- Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
- Hold Up To 1.5 Quarts Of Water Without Spilling
PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.2923173)
from
$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).
Product Features:
See More
Product Features:
- Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
- Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
- Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
- No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
- Custom Fit Car Mats
- Anti Skid
- Raised Borders
- All Weather Protection
- Odorless
Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Chrome, Front, 2 Pc (Part No.682445)
from
$109.99
With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with modern, curved design
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M(TM) automotive-grade adhesive above the window
- Made from durable, impact-resistant acrylic
- Available in dark smoke and chrome finishes
Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Smoke, Front, 2 Pc (Part No.92445)
from
$49.99
With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with modern, curved design
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M automotive-grade adhesive above the window
- Made from durable, impact-resistant acrylic
- Available in dark smoke and chrome finishes
Auto Ventshade (AVS) – Ventvisor Window Visors: Outside Mount, Chrome, Front And Rear, 4 Pc (Part No.684977)
from
$155.99
With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with modern, curved design
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M(TM) automotive-grade adhesive above the window
- Made from durable, impact-resistant acrylic
- Available in dark smoke and chrome finishes
Dorman – Help – Keyless Remote Case (Part No.13633)
from
$20.99
Cracked or wore out your key fob case? Want to add a custom look? Just replace the case with this convenient, affordable keyless entry transmitter cover, restoring or enhancing the look.
Product Features:
See More
Product Features:
- Replacement or upgrade – this keyless remote case allows you to simply replace a broken case or upgrade your current look.
- Seamless fit – matches dimensions of original transmitter cover for specific vehicle applications for a tight seal
- Reliable construction – keeps moisture and debris out of internal electronics for long service life
- Trustworthy quality – backed by team of product experts and engineers in the United States, and more than a century of experience
Rightline Gear – Full Size Standard Bed Truck Tent (6.5′) (Part No.110730)
from
$204.99
The Rightline Gear Truck Tent lets you experience camping in a dry truck bed, up off the ground, without the complication of tarps, stakes, and guy lines. It features a floorless design that allows you to set up or take down the tent without removing your gear from the bed. The tent is outfitted with (2) gear pockets, a lantern hanging hook, glow-in-the-dark zipper pulls, and a sky view vent. Measure the inside of your truck bed with the tailgate up and check the Truck Tent Sizing Guide. Turn any spot into a comfortable campsite!
Product Features:
See More
Product Features:
- Floorless design allows for set up without removing gear from the bed
- Protective heavy duty straps and nylon buckles, won’t damage truck’s finish
- Color coded poles and pole pockets for quick and easy set up
- Water resistant fabric with tape sealed seams (PU 2000mm)
- Sky view vent for more light, ventilation, and sleeping under the stars
- All truck tents sleep (2) adults
- Includes: tent, rainfly, stuff sack, and sewn-in set up guide
TrailFX – Heavy Duty Adjustable Truck Ladder Rack with 1500 lb Capacity (Part No.FCLR001B)
from
$804.99
TrailFX Contractor Racks are designed and manufactured with functionality, adjustability, along with a heavy duty carrying capacity as top priority.
Product Features:
See More
Product Features:
- Adjustable To Fit Long And Short Bed With Regular, Extended Or Crew Cab Trucks: Fits All Fullsize Pickup Trucks
- Rated To Support Up To 1,500 Pounds Loads
- Rear Grab Handle Built In To Assist With Access Into Truck Bed Or Loading Tools On To Rack System
- Rear Crossbar Easy To Remove If Needed For Tall Cargo
- Rope Ties On Each Corner
- Heavy Duty Steel Construction
- Can Be Mounted Permanently Or Temporarily With No Drill J Hooks
- No Drill Installation Provided
TrailFX – Heavy-Duty Adjustable Ladder Rack for Full-Size Trucks (Part No.FCLR002B)
from
$812.99
TrailFX(R) Contractor Racks are designed and manufactured with both functionality and durability as a top priority. These racks are fully adjustable and will fit full-size pickup trucks with either short or long beds.
Product Features:
See More
Product Features:
- Adds Convenience For Hauling Cumbersome Equipment Or Materials
- Durable Steel Cleats Are Welded To Each Upright
- Rear Cross Member Can Be Easily Removed To Accommodate Taller Items
- Black Powder Coated Finish
- No Drilling Required When Installed With Supplied J-Hooks
- Adjustable To Fit Both Long And Shortbed Models
Kat’s – AUTO ENGINE HEATER (Part No.11628)
from
$100.99
AUTO ENGINE HEATER
Kat’s – Freeze Plug Heater (Part No.11412)
from
$64.99
Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.
Product Features:
See More
Product Features:
- Saves wear and tear on your engine
- Simple installation directly into engine block
Kat’s – Engine Heater; Replacement Cord (Part No.28500)
from
$27.99
Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.
Product Features:
See More
Product Features:
- Engine heater replacement cord
Auto Ventshade (AVS) – Low Profile Ventvisor Window Visors: Outside Mount, Matte Black, 4 Pc (Part No.774074)
from
$99.99
With a flat design and lowest profile available, the AVS Low Profile Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke and matte black for the custom look you want for your vehicle! Enjoy fresh air and comfort no matter the weather!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with stealthy design for the lowest profile
- Choose Internal (In-Channel) or External (Above Door Glass) mount options
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M automotive-grade adhesive above the window
- Impact-resistant acrylic or warp-resistant ABS construction
- Available in dark smoke (acrylic) and matte black (ABS) finishes
Auto Ventshade (AVS) – Low Profile Ventvisor Window Visors: Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.894074)
from
$89.99
With a flat design and lowest profile available, the AVS Low Profile Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke and matte black for the custom look you want for your vehicle! Enjoy fresh air and comfort no matter the weather!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with stealthy design for the lowest profile
- Choose Internal (In-Channel) or External (Above Door Glass) mount options
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M automotive-grade adhesive above the window
- Impact-resistant acrylic or warp-resistant ABS construction
- Available in dark smoke (acrylic) and matte black (ABS) finishes
Auto Ventshade (AVS) – Aeroskin®, Hood Protector, Chrome, Low Profile, 1 Pc (Part No.622095)
from
$149.99
With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.
Product Features:
See More
Product Features:
- Custom-molded with precision engineering to ensure a perfect fit
- Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
- Cool, contoured and classy styling accent
- Easy, no-drill installation — installs using 3M automotive-grade adhesive
- Car wash safe
- Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes
Stampede – Vigilante Premium, Hood Shields, Flag W/Eagle, High Profile, 1 Pc (Part No.2911-30)
from
$167.99
Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.
Product Features:
See More
Product Features:
- Maximum protection to your hood to complement the look of your vehicle
- Precision engineered for a perfect fit to your vehicle
- Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
- Available in smoke, chrome, American flag and camo finishes
- UV and scratch-resistant while being car-wash safe
Auto Ventshade (AVS) – Bugflector®, Hood Protector, Smoke, Medium Profile, 1 Pc (Part No.23108)
from
$59.99
AVS Bugflector® helps prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs. Whether you drive a truck, SUV, CUV or passenger car, you can choose from the style that suits your design preferences and vehicle style.
Product Features:
See More
Product Features:
- Provides deflection to protect hood, fenders, and windshield
- High profile, narrow tapered design for Trucks, SUVs, and Vans
- Off-the-hood design allows for easy cleaning and waxing
- Durable, impact-resistant acrylic construction
- Available in dark smoke finish
- Easy, no-drill installation
Auto Ventshade (AVS) – Aeroskin®, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.322095)
from
$89.99
With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.
Product Features:
See More
Product Features:
- Custom-molded with precision engineering to ensure a perfect fit
- Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
- Cool, contoured and classy styling accent
- Easy, no-drill installation — installs using 3M automotive-grade adhesive
- Car wash safe
- Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes
Auto Ventshade (AVS) – Aeroskin®, Hood Protector, Matte Black, Low Profile, 1 Pc (Part No.377095)
from
$99.99
With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.
Product Features:
See More
Product Features:
- Custom-molded with precision engineering to ensure a perfect fit
- Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
- Cool, contoured and classy styling accent
- Easy, no-drill installation — installs using 3M automotive-grade adhesive
- Car wash safe
- Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes
Auto Ventshade (AVS) – Chrome, Hood Protector, Chrome, High Profile, 1 Pc (Part No.680403)
from
$149.99
AVS Chrome Hood Protectors enhance factory components while complementing existing chrome trim packages. With a high-profile, full-wrap shield, your truck or SUV will be fully protected from debris and bugs. Manufactured from OEM-quality chrome plating our hood protectors offer the best protection against road debris. Very easy to install with step-by-step instructions to ensure a good fitment. Easy cleaning comes with the off-the-hood design. Comes with a Limited Lifetime Warranty.
Product Features:
See More
Product Features:
- Provides deflection to protect hood, fenders, and windshield
- High profile, full-wrap design for Trucks, SUVs, and Vans
- Off-the-hood design allows for easy cleaning and waxing
- Durable, impact-resistant acrylic construction
- Available in dark smoke or chrome
- Easy, no-drill installation
Stampede – Vigilante Premium, Hood Shields, Flag No Eagle, High Profile, 1 Pc (Part No.2418-41)
from
$178.99
Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.
Product Features:
See More
Product Features:
- Maximum protection to your hood to complement the look of your vehicle
- Precision engineered for a perfect fit to your vehicle
- Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
- Available in smoke, chrome, American flag and camo finishes
- UV and scratch-resistant while being car-wash safe
Auto Ventshade (AVS) – Aeroskin® II, Hood Protector, Black, Low Profile, 1 Pc (Part No.436095)
from
$119.99
Protect your hood with style by installing an AVS Aeroskin® hood shield. Adding a whole new spin to what a hood protector looks like, each Aeroskin II hood shield is crafted from high-quality materials and is built to last with wind and bug deflection. Crafted from high-impact resistant TPO material, you never have to worry about dents and dings damaging your hood. The sleek design coated in an OEM matte black textured finish, the Aeroskin II will stand out from the rest. No need to worry about drilling into your vehicle’s hood as the AVS Aeroskin II hood protector installs using 3M automotive grade adhesive. Backed by a limited lifetime warranty and proudly made in the USA, get the hood protection that provides tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields!
Product Features:
See More
Product Features:
- Contoured design provides ultimate hood protection
- Low-Profile, flush mount design with deflection for Trucks and SUVs
- Installs without drilling using 3M automotive-grade adhesive
- Tough Dura-Flex® 2000 TPO material construction stands up to hazards, off-road and on
- Available in Textured Black finish
Upgrade your 2016 Nissan Titan XD with Top-Quality Automotive Accessories
When it comes to maintaining or upgrading your 2016 Nissan Titan XD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Automotive Accessories are key to keeping your Titan XD functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Automotive Accessories for the 2016 Nissan Titan XD, designed to meet your needs without breaking the bank.
From
Seasonal Accessory
replacements to
Floor Mats
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Automotive Accessories for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Automotive Accessories for your 2016 Nissan Titan XD at great prices.
Our Automotive Accessories inventory for this model
ranges from just $15.49 to $1,438.99, with
an average price of $232.04.
Our 30 Automotive Accessories in stock come from 10 trusted brands, so you’re sure to find the right part for your 2016 Nissan Titan XD without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Automotive Accessory upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2016 Nissan Titan XD is always ready to roll. We’re committed to providing you with everything you need to keep your Titan XD in top shape, all in one place.
Start shopping confidently below for your 2016 Nissan Titan XD!
Best-Selling Seasonal Accessories for 2016 Nissan Titan XDs
Enhance the driving experience in your Nissan with 3 quality Seasonal Accessory components, starting at $27.99.
Kat’s – Freeze Plug Heater (Part No.11412)
from
$64.99
Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.
Product Features:
See More
Product Features:
- Saves wear and tear on your engine
- Simple installation directly into engine block
Kat’s – Engine Heater; Replacement Cord (Part No.28500)
from
$27.99
Kats Heater believes that quality is a basic requirement in the design, manufacture, and delivery of our products and services. Our quality policy is Total Customer Satisfaction in the delivery of products and services to consistently meet evolving customer expectations. We shall continuously pursue quality improvement programs that enable each employee to do his or her job right the first time and each time.
Product Features:
See More
Product Features:
- Engine heater replacement cord
Kat’s – AUTO ENGINE HEATER (Part No.11628)
from
$100.99
AUTO ENGINE HEATER
Most Popular 2016 Nissan Titan XD Floor Mats
Customize your Nissan with 6 Floor Mats products
like Floormats, all
priced under $153.99.
WeatherTech – Molded Fit, Black, Thermoplastic Polyolefin (Tpo), 2 Piece (Part No.449081)
from
$153.99
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.
Product Features:
See More
Product Features:
- Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
- Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
- Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
- A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
- Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
- Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
- Available in fronts, rears, center hump, 3rd and 4th row, and complete sets
- Available in black, tan, grey and cocoa
WeatherTech – Molded Fit, Raised Channels With A Lower Reservoir, Cocoa, 2 Piece (Part No.479081)
from
$153.99
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.
Product Features:
See More
Product Features:
- Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
- Lines The Interior Carpet Up The Front, Back And Even Up The Sides Of The Vehicles Footwell
- Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
- A Patent Pending High-Density Tri-Extruded Material Allows For A Rigid Core For Strength While Offering Surface Friction To The Carpet, As Well As Tactile Feel To The Surface
- Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
- Manufactured From A Proprietary Custom Blended TPO (Thermopolyolefin) That Is Not Only Wear Resistant, But Also Remains Flexible Under Extreme Temperatures
- Hold Up To 1.5 Quarts Of Water Without Spilling
PantsSaver – Custom Fit 4 Piece Floor Mat Set, Tan (Part No.2923163)
from
$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).
Product Features:
See More
Product Features:
- Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
- Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
- Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
- No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
- Custom Fit Car Mats
- Anti Skid
- Raised Borders
- All Weather Protection
- Odorless
PantsSaver – Custom Fit 4 Piece Floor Mat Set, Black (Part No.2923161)
from
$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).
Product Features:
See More
Product Features:
- Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
- Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
- Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
- No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
- Custom Fit Car Mats
- Anti Skid
- Raised Borders
- All Weather Protection
- Odorless
PantsSaver – Custom Fit 4 Piece Floor Mat Set, Grey (Part No.2923162)
from
$129.99
Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout so that it install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).
Product Features:
See More
Product Features:
- Custom Fit – Perfect Custom Fit for you Vehicle with full coverage. Mats are Non-toxic, Odorless, Contain No Latex
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle¿s floor clean and fresh in all Seasons
- All Weather Protection – The Floor Mats are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle┐s floor clean and fresh in all Seasons
- Built To Last – Offers waterproof protection with a Guard Against Spills and Debris
- Easy to Clean – Simply spray with a hose, wipe with a washcloth or vaccum to remove Dirt, Grit, and Grime to leave them looking and feeling like Brand New
- No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
- Custom Fit Car Mats
- Anti Skid
- Raised Borders
- All Weather Protection
- Odorless
WeatherTech – Molded Fit, Black, Thermoplastic Polyolefin (Tpo), 1 Piece (Part No.449083)
from
$128.99
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech have worked tirelessly to develop the most advanced floor protection available today. The WeatherTech FloorLiner accurately and completely lines the interior carpet giving absolute interior protection. The WeatherTech FloorLiner lines the interior carpet up the front, back and even up the sides of the vehicle footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit. A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech FloorLiner over the door sill. No muss-no fuss.
Product Features:
See More
Product Features:
- Accurately And Completely Lines The Interior Carpet Giving Absolute Interior Protection
- Provides Tactile Feel To The Surface
- Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
- Wear Resistant And Remains Flexible Under Extreme Temperatures
- Advanced Surfacing Creates Channels That Carry Fluids And Debris To A Lower Reservoir With Further Channeling To Help Minimize Fluid Movement While Driving
- Digital Laser Measurements Of Interior Surfaces Offer A Consistently Perfect Fit
- Hold Up To 1.5 Quarts Of Water Without Spilling
Top Picks for 2016 Nissan Titan XD License Plate Frames
Upgrade Nissan Titan XDs with top-quality License Plate Frames parts, including 1 OEM and aftermarket selections for your 2016 model.
Dee Zee – For Use With Dee Zee Bull Bars, Black, Steel (Part No.DZLPMOUNT)
from
$15.49
Dee Zee Bull Bar Guard License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.
Product Features:
See More
Product Features:
- License Plate Frame Mount
- Made From 2.5 Millimeter Hot Rolled Steel
- Protective Gloss Black Powder Coat Finish
- Attach A License Plate To Your Dee Zee Bull Bar
- Mounts To Underside Of The Center Tube
- Uses 6 Millimeter Threaded Inserts
In-Demand Bug Deflectors for 2016 Nissan Titan XDs
Select from 8 premium Bug Deflectors parts for your 2016 Nissan Titan XD, with prices ranging from $59.99 to $178.99.
Auto Ventshade (AVS) – Bugflector®, Hood Protector, Smoke, Medium Profile, 1 Pc (Part No.23108)
from
$59.99
AVS Bugflector® helps prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs. Whether you drive a truck, SUV, CUV or passenger car, you can choose from the style that suits your design preferences and vehicle style.
Product Features:
See More
Product Features:
- Provides deflection to protect hood, fenders, and windshield
- High profile, narrow tapered design for Trucks, SUVs, and Vans
- Off-the-hood design allows for easy cleaning and waxing
- Durable, impact-resistant acrylic construction
- Available in dark smoke finish
- Easy, no-drill installation
Auto Ventshade (AVS) – Aeroskin®, Hood Protector, Matte Black, Low Profile, 1 Pc (Part No.377095)
from
$99.99
With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.
Product Features:
See More
Product Features:
- Custom-molded with precision engineering to ensure a perfect fit
- Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
- Cool, contoured and classy styling accent
- Easy, no-drill installation — installs using 3M automotive-grade adhesive
- Car wash safe
- Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes
Stampede – Vigilante Premium, Hood Shields, Flag No Eagle, High Profile, 1 Pc (Part No.2418-41)
from
$178.99
Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.
Product Features:
See More
Product Features:
- Maximum protection to your hood to complement the look of your vehicle
- Precision engineered for a perfect fit to your vehicle
- Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
- Available in smoke, chrome, American flag and camo finishes
- UV and scratch-resistant while being car-wash safe
Auto Ventshade (AVS) – Aeroskin®, Hood Protector, Chrome, Low Profile, 1 Pc (Part No.622095)
from
$149.99
With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.
Product Features:
See More
Product Features:
- Custom-molded with precision engineering to ensure a perfect fit
- Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
- Cool, contoured and classy styling accent
- Easy, no-drill installation — installs using 3M automotive-grade adhesive
- Car wash safe
- Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes
Stampede – Vigilante Premium, Hood Shields, Flag W/Eagle, High Profile, 1 Pc (Part No.2911-30)
from
$167.99
Each Vigilante Hood Protector is precision engineered to fit your vehicle and installs easily using 3M automotive-grade adhesive. No special hardware or drilling is required! Car-wash safe, and UV and scratch-resistant, Stampede Automotive Accessories Hood Protectors are proudly made in the USA of impact-resistant acrylic in a range of finishes including smoke, chrome, American flag and genuine licensed Mossy Oak and Realtree camouflage patterns.
Product Features:
See More
Product Features:
- Maximum protection to your hood to complement the look of your vehicle
- Precision engineered for a perfect fit to your vehicle
- Easy installation: no special hardware or drilling required – attaches with 3M automotive-grade adhesive
- Available in smoke, chrome, American flag and camo finishes
- UV and scratch-resistant while being car-wash safe
Auto Ventshade (AVS) – Chrome, Hood Protector, Chrome, High Profile, 1 Pc (Part No.680403)
from
$149.99
AVS Chrome Hood Protectors enhance factory components while complementing existing chrome trim packages. With a high-profile, full-wrap shield, your truck or SUV will be fully protected from debris and bugs. Manufactured from OEM-quality chrome plating our hood protectors offer the best protection against road debris. Very easy to install with step-by-step instructions to ensure a good fitment. Easy cleaning comes with the off-the-hood design. Comes with a Limited Lifetime Warranty.
Product Features:
See More
Product Features:
- Provides deflection to protect hood, fenders, and windshield
- High profile, full-wrap design for Trucks, SUVs, and Vans
- Off-the-hood design allows for easy cleaning and waxing
- Durable, impact-resistant acrylic construction
- Available in dark smoke or chrome
- Easy, no-drill installation
Auto Ventshade (AVS) – Aeroskin® II, Hood Protector, Black, Low Profile, 1 Pc (Part No.436095)
from
$119.99
Protect your hood with style by installing an AVS Aeroskin® hood shield. Adding a whole new spin to what a hood protector looks like, each Aeroskin II hood shield is crafted from high-quality materials and is built to last with wind and bug deflection. Crafted from high-impact resistant TPO material, you never have to worry about dents and dings damaging your hood. The sleek design coated in an OEM matte black textured finish, the Aeroskin II will stand out from the rest. No need to worry about drilling into your vehicle’s hood as the AVS Aeroskin II hood protector installs using 3M automotive grade adhesive. Backed by a limited lifetime warranty and proudly made in the USA, get the hood protection that provides tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields!
Product Features:
See More
Product Features:
- Contoured design provides ultimate hood protection
- Low-Profile, flush mount design with deflection for Trucks and SUVs
- Installs without drilling using 3M automotive-grade adhesive
- Tough Dura-Flex® 2000 TPO material construction stands up to hazards, off-road and on
- Available in Textured Black finish
Auto Ventshade (AVS) – Aeroskin®, Hood Protector, Smoke, Low Profile, 1 Pc (Part No.322095)
from
$89.99
With a low profile, flush-mount design, the Aeroskin® offers ultimate hood protection against bugs, dirt and road debris for Trucks, SUVs, CUVs, Cars and Vans. The Aeroskin hood shield provides a tough defense against bugs, dirt and road debris for vehicle hoods, fenders and windshields; keeping your hood looking showroom new. Combining modern styling with durable construction and maximum protection, the AVS Aeroskin is an innovative hood protector that looks as good as it functions. Its low-profile flush-mount design sits on the front of your vehicle to provide sleek, aerodynamic protection. Installing your AVS Aeroskin is as simple as can be. It features a simple no-drill installation process that uses 3M automotive-grade tape that will keep it securely mounted to your vehicle. Since it mounts flush to your vehicle as well, it’s perfect for those who want a non-obtrusive look that complements your ride’s appearances. Options include a dark smoke finish, matte black or chrome made of high-quality ABS impact resistant acrylic which makes each AVS Aeroskin durable and built to last. With its forward thinking design, awesome aesthetics, and durable construction, the AVS Aeroskin is perfect to keep you hood and windshield safe and clean.
Product Features:
See More
Product Features:
- Custom-molded with precision engineering to ensure a perfect fit
- Provides sleek, aerodynamic hood protection with low-profile, flush-mount design
- Cool, contoured and classy styling accent
- Easy, no-drill installation — installs using 3M automotive-grade adhesive
- Car wash safe
- Available in dark smoke, chrome, matte black, OEM Paint Code Color-match finishes
Most Sold 2016 Nissan Titan XD Wind Deflector Parts
Explore our best-selling Nissan parts for the 2016 Titan XD among 2 OEM and aftermarket options starting from $89.99.
Auto Ventshade (AVS) – Low Profile Ventvisor Window Visors: Outside Mount, Matte Black, 4 Pc (Part No.774074)
from
$99.99
With a flat design and lowest profile available, the AVS Low Profile Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke and matte black for the custom look you want for your vehicle! Enjoy fresh air and comfort no matter the weather!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with stealthy design for the lowest profile
- Choose Internal (In-Channel) or External (Above Door Glass) mount options
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M automotive-grade adhesive above the window
- Impact-resistant acrylic or warp-resistant ABS construction
- Available in dark smoke (acrylic) and matte black (ABS) finishes
Auto Ventshade (AVS) – Low Profile Ventvisor Window Visors: Outside Mount, Smoke, Front And Rear, 4 Pc (Part No.894074)
from
$89.99
With a flat design and lowest profile available, the AVS Low Profile Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke and matte black for the custom look you want for your vehicle! Enjoy fresh air and comfort no matter the weather!
Product Features:
See More
Product Features:
- Precision engineered for a custom fit on your vehicle with stealthy design for the lowest profile
- Choose Internal (In-Channel) or External (Above Door Glass) mount options
- Easy installation with no-drilling or special hardware required
- Attaches easily with 3M automotive-grade adhesive above the window
- Impact-resistant acrylic or warp-resistant ABS construction
- Available in dark smoke (acrylic) and matte black (ABS) finishes
FAQs for 2016 Nissan Titan XD Automotive Accessories
Which Automotive Accessories are best-sellers for 2016 Nissan Titan XDs?
Out of 30 Automotive Accessories that fit 2016 Nissan Titan XDs, the following parts are the top sellers:
- Ventvisor Window Visors: Outside Mount, Smoke, Front And Rear, 4 Pc (11735679) – $69.99
- Freeze Plug Heater (11124671) – $64.99
- Low Profile Ventvisor Window Visors: Outside Mount, Matte Black, 4 Pc (12008863) – $99.99
What’s the price range for 2016 Nissan Titan XD Automotive Accessories?
Automotive Accessory prices for the 2016 Nissan Titan XD start at $15.49 and go up to $1,438.99 for the most premium parts.
What’s the average price of a Automotive Accessory for a 2016 Nissan Titan XD?
The average price for Automotive Accessories for the 2016 Nissan Titan XD is $232.04. Keep in mind the variety of part types within our Automotive Accessory category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Automotive Accessories for other Nissan Titan XD model years?
What are the cheapest Automotive Accessories for my 2016 Nissan Titan XD?
The cheapest 2016 Nissan Titan XD Automotive Accessories we carry in stock are:
- For Use With Dee Zee Bull Bars, Black, Steel (10971846) – $15.49
- Keyless Remote Case (10436509) – $20.99
- Engine Heater; Replacement Cord (11290217) – $27.99
- Bugflector®, Hood Protector, Smoke, Medium Profile, 1 Pc (11741788) – $59.99
- Freeze Plug Heater (11124671) – $64.99
What types of Automotive Accessories do you sell for my 2016 Nissan Titan XD?
As of 2/5/25, these are some of the most in-demand types of Automotive Accessories for a 2016 Nissan Titan XD:
Can I get help with 2016 Nissan Titan XD Automotive Accessory orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Automotive Accessories and more.
What is your return policy for Nissan Titan XD Automotive Accessories?
Advance Auto Parts keeps returns simple. For new Nissan Titan XD Automotive Accessories and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
