2016 Mitsubishi Lancer Belts and Hoses
Find Your Specific 2016 Mitsubishi Lancer Belts and Hoses
Below you will find various in-demand Mitsubishi Belts and Hoses, components and accessories for your 2016 Lancer. Advance Auto Parts has popular Lancer parts like Belt Tensioners, Serpentine and V Belts, Heater Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Lancer model years including
2008,
2009,
2010,
2011,
2012,
2013,
2014,
2015,
2017 and more. Select a category of 2016 Mitsubishi Lancer Belts and Hoses below and start saving instantly.
Popular 2016 Mitsubishi Lancer Belts and Hoses Categories
Essential Belts and Hoses for 2016 Mitsubishi Lancers
Carquest Standard – "Carquest Serpentine Belt: 83.0"" Long, 6 Rib Count, 830K6" (Part No.830K6)
from
$26.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 83.07 Long, 6 Rib Count, 830K6 (Part No.830K6)
from
$26.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Carquest Standard – "Carquest Serpentine Belt: 30.5"" Long, 4 Rib Count, 305K4" (Part No.305K4)
from
$21.49
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 30.51 Long, 4 Rib Count, 5040305 (Part No.5040305)
from
$33.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28408 (Part No.28408)
from
$1.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Heater Hose By Gates
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 5/8 Inch Diameter (Sold by foot), 80271 (Part No.80271)
from
$2.99
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (Part No.87649)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length, 87620 (Part No.87620)
from
$17.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060866 (Part No.K060866)
from
$64.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Carquest Standard – "Carquest Serpentine Belt: 74.0"" Long, 6 Rib Count, 740K6" (Part No.740K6)
from
$36.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Carquest Standard – "Carquest Serpentine Belt: 86.5"" Long, 6 Rib Count, 865K6" (Part No.865K6)
from
$38.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 74.02 Long, 6 Rib Count, 5060740 (Part No.5060740)
from
$47.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter, 900243A (Part No.900243A)
from
$101.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This heavy duty steel pulley conforms to original equipment material and tolerances specifications and meets performance and durability requirements. Fits tensioner and idler applications including Kia/Mitsubishi/Dodge. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – Litens Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, with Hardware, 900504A (Part No.900504A)
from
$27.99
This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the Original Equipment pulley, the Litens replacement part is constructed of heavy duty polymer composite for long life and trouble free performance. This pulley is supplied with a new integrated bolt and dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Dorman – Dorman Idler/Tensioner Pulley: Specific Fit, Plastic, 70 mm Diameter, 419-598 (Part No.419-598)
from
$32.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
See More
Dayco – Dayco Serpentine Idler/Tensioner Pulley Steel, 75mm Dia., 25.6mm Width, 6 Grooves, 89819 (Part No.89819)
from
$103.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
INA US – INA US Accessory Drive Belt Tensioner Assembly, FT40509 (Part No.FT40509)
from
$168.99
Our front end auxiliary drive (FEAD) solutions ensure outstanding vibration damping in the smallest of installation spaces in today€™s high-load engines. Besides offering a complete selection of individual components, individually-assembled FEAD kits allow holistic maintenance that help avoid secondary damages.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999829A (Part No.999829A)
from
$139.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Mitsubishi applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999216A (Part No.999216A)
from
$156.99
This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this tensioner is manufactured in Japan for Mitsubishi’s 4G64 and 4G63 engines. This original equipment design maintains a lift feature for easy belt removal and replacement as well the O.E. specified steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
INA US – INA US Engine Timing Belt Tensioner, FT40325 (Part No.FT40325)
from
$81.99
Our front end auxiliary drive (FEAD) solutions ensure outstanding vibration damping in the smallest of installation spaces in today€™s high-load engines. Besides offering a complete selection of individual components, individually-assembled FEAD kits allow holistic maintenance that help avoid secondary damages.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11"" Long, 1.31"" Diameter, B71637" (Part No.B71637)
from
$32.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.31"" Diameter, E72109" (Part No.E72109)
from
$58.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.19"" Diameter, E72203" (Part No.E72203)
from
$46.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25"" Long, 1.34"" Diameter, E72065" (Part No.E72065)
from
$36.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
K&N – K&N Cold Air Intake: Adds Up To 5 Horsepower, With Washable Air Filter, 63-5506 (Part No.63-5506)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
See More
Upgrade your 2016 Mitsubishi Lancer with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2016 Mitsubishi Lancer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Belts and Hoses are key to keeping your Lancer functioning at its best. At Advance Auto Parts, we offer a wide selection of 11 Belts and Hoses for the 2016 Mitsubishi Lancer, designed to meet your needs without breaking the bank.
From
Belt Tensioner
replacements to
Serpentine and V Belts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2016 Mitsubishi Lancer at great prices.
Our Belts and Hoses inventory for this model
ranges from just $12.99 to $317.99, with
an average price of $70.96.
Our 11 Belts and Hoses in stock come from 6 trusted brands, so you’re sure to find the right part for your 2016 Mitsubishi Lancer without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Mitsubishi Lancer, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Driveworks, and more.
Litens Belts and Hoses
start at just $27.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $38.99, and at an average 4.5 stars rating.
With 180 customer reviews and counting, our 2016 Mitsubishi Lancer Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2016 Mitsubishi Lancer is always ready to roll. We’re committed to providing you with everything you need to keep your Lancer in top shape, all in one place.
Start shopping confidently below for your 2016 Mitsubishi Lancer!
Best-Selling Belt Tensioners for 2016 Mitsubishi Lancers
Enhance the driving experience in your Mitsubishi with 1 quality Belt Tensioner components, starting at $139.99.
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999829A (Part No.999829A)
from
$139.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Mitsubishi applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Most Popular 2016 Mitsubishi Lancer Serpentine and V Belts
Customize your Mitsubishi with 6 Serpentine and V Belts products
like Serpentine Belts and
V-Belts, all
priced under $64.99.
Dayco – Dayco Poly Rib Belt Serpentine Belt 86.5 Long, 6 Rib Count, 5060865 (Part No.5060865)
from
$58.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 86.5 Long, 6 Rib Count, 865K6 (Part No.865K6)
from
$38.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 103.27 Long, 6 Rib Count, 5061033 (Part No.5061033)
from
$38.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – V-Ribbed Belt, Driveworks, 1033K6 (Part No.1033K6)
from
$24.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Gates – Gates Micro-V Serpentine Drive Belt, K060866 (Part No.K060866)
from
$64.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
See More
Carquest Standard – "Carquest Serpentine Belt: 86.5"" Long, 6 Rib Count, 865K6" (Part No.865K6)
from
$38.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Top Picks for 2016 Mitsubishi Lancer Heater Hoses
Upgrade Mitsubishi Lancers with top-quality Heater Hoses parts, including 1 OEM and aftermarket selections for your 2016 model.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (Part No.87649)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
In-Demand Pulleys for 2016 Mitsubishi Lancers
Select from 1 premium Pulleys parts for your 2016 Mitsubishi Lancer.
Litens – Litens Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, with Hardware, 900504A (Part No.900504A)
from
$27.99
This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the Original Equipment pulley, the Litens replacement part is constructed of heavy duty polymer composite for long life and trouble free performance. This pulley is supplied with a new integrated bolt and dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Most Sold 2016 Mitsubishi Lancer Radiator Hoses
Explore our best-selling Mitsubishi parts for the 2016 Lancer among 1 OEM and aftermarket options starting from $58.99.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.31"" Diameter, E72109" (Part No.E72109)
from
$58.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Top-Rated Belts and Hoses Brands For Your 2016 Mitsubishi Lancer
Shop for the best-rated brands offering Belts and Hoses and other products for your 2016 Mitsubishi Lancers. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2016 Lancer start at just $27.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 2016 Mitsubishi Lancer Belts and Hoses
When it comes to maintaining or upgrading your 2016 Mitsubishi Lancer, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2016 Mitsubishi Lancer. With over 1 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $27.99. Plus, with over 6 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$27.99
(6)
Litens Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, with Hardware, 900504A
“factory fit – good product”
Popular Dayco 2016 Mitsubishi Lancer Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2016 Mitsubishi Lancer owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2016 Lancer, Advance Auto Parts carries a full inventory of 2 Dayco Belts and Hoses. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Dayco Belts and Hoses range up to $58.99, plus, with more than 104 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$58.99
(103)
Dayco Poly Rib Belt Serpentine Belt 86.5 Long, 6 Rib Count, 5060865
“Product fit well no issues”
from
$58.99
(1)
"Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 26"" Long, 1.31"" Diameter, E72109"
“Perfect fit for 2004 Dodge stratus sxt coupe”
FAQs for 2016 Mitsubishi Lancer Belts and Hoses
Which Belts and Hoses are best-sellers for 2016 Mitsubishi Lancers?
Out of 11 Belts and Hoses that fit 2016 Mitsubishi Lancers, the following parts are the top sellers:
- Driveworks Poly Rib Belt Serpentine Belt 86.5 Long, 6 Rib Count, 865K6 (5061784) – $38.99
- Dayco Poly Rib Belt Serpentine Belt 103.27 Long, 6 Rib Count, 5061033 (99983000) – $38.99
- Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999829A (11872466) – $139.99
What’s the price range for 2016 Mitsubishi Lancer Belts and Hoses?
Belts and Hose prices for the 2016 Mitsubishi Lancer start at $12.99 and go up to $317.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2016 Mitsubishi Lancer?
The average price for Belts and Hoses for the 2016 Mitsubishi Lancer is $70.96. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Mitsubishi Lancer model years?
What are the cheapest Belts and Hoses for my 2016 Mitsubishi Lancer?
The cheapest 2016 Mitsubishi Lancer Belts and Hoses we carry in stock are:
- Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 14 1/4 Inch Length, 87649 (15590023) – $12.99
- V-Ribbed Belt, Driveworks, 1033K6 (10061871) – $24.99
- Litens Idler Pulley: Direct Fit, Thermoplastic, 70mm Diameter, with Hardware, 900504A (10150987) – $27.99
- Driveworks Poly Rib Belt Serpentine Belt 86.5 Long, 6 Rib Count, 865K6 (5061784) – $38.99
- Dayco Poly Rib Belt Serpentine Belt 103.27 Long, 6 Rib Count, 5061033 (99983000) – $38.99
What are the top-rated Belts and Hoses that fit the 2016 Mitsubishi Lancer?
Out of 180 reviews by customers, our 2016 Mitsubishi Lancer Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2016 Mitsubishi Lancer and their top-rated products:
- Hose Fittings
- K&N Cold Air Intake: Adds Up To 5 Horsepower, With Washable Air Filter, 63-5506 (11971937) – $367.99
- Serpentine and V Belts
- K&N Cold Air Intake: Adds Up To 5 Horsepower, With Washable Air Filter, 63-5506 (11971937) – $367.99
What types of Belts and Hoses do you sell for my 2016 Mitsubishi Lancer?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2016 Mitsubishi Lancer:
Can I get help with 2016 Mitsubishi Lancer Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Belts and Hoses and more.
What is your return policy for Mitsubishi Lancer Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Mitsubishi Lancer Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
