2016 Mazda 3 Body Parts

Below you will find various in-demand Mazda Body Parts, components and accessories for your 2016 3. Advance Auto Parts has popular 3 parts like Vehicle Hoods, Bodies and Fender Parts, Vehicle Mirrors and more. You’ll also find aftermarket and OEM Body Parts for other 3 model years including 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2019 and more. Select a category of 2016 Mazda 3 Body Parts below and start saving instantly.

Popular 2016 Mazda 3 Body Parts Categories

Window Regulators

Lift Supports

Grilles

Power Window Switches

Bumper Pad Retainer Strips

Fender Braces

Bumper Impact Absorbers

Mirror Replacement Glass

Bumper Cover Reflectors

Essential Body Parts for 2016 Mazda 3s

from

$38.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector for Hatchback, But Is Passenger Side Rear Bumper Cover Reflector for Sedan Models. It is Designed to Replace Your Existing Bumper Cover Reflector. Check to Be Sure It Fits Your Vehicle.

Product Features:

Also Used As Driver Side Rear Bumper Cover Reflector, Sedan Models
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$99.99

New CAPA Certified Premium Replacement Passenger Side Fender, Without Signal Light Hole, Without Rocker Molding Hole, With Stone Guards, Made Of High Strength Steel

Product Features:

Without Signal Light Hole, Without Rocker Molding Hole, With Stone Guards, Made Of High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$56.99

New Standard Replacement Passenger Side Fender Liner, 2.5 Liter Engine, USA And Euro Sport Type

Product Features:

2.5 Liter Engine, USA And Euro Sport Type, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$169.99

This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Reliable design – engineered in North America and backed by long history of automotive aftermarket experience

from

$34.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$212.36

Window Switch

from

$86.99

New CAPA Certified NSF Certified Premium Replacement Rear Bumper Impact Absorber, Sedan Models

Product Features:

Sedan Models, Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$71.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Power Door Mirror, Without Heated Glass, Paint To Match, Without Turn Signal. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:

Without Heated Glass And Turn Signal, Paint To Match, Flat Glass
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$153.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass is power adjustable and heated, with turn signal
OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
Manual folding for additional clearance
Textured Black with Paintable to match cover

from

$519.99

Rain Sensor

from

$137.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$12.99

New Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

New Standard Replacement Passenger Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$29.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Lower Grille Molding, Chrome, for Hatchback and Sedan. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome, For Hatchback And Sedan, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Lower Grille Molding, Chrome, for Hatchback and Sedan. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome, For Hatchback And Sedan, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$122.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, With Glossy Black Insert, Without Collision Warning. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

With Glossy Black Insert, Without Collision Warning, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$25.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Standard Type, Matte-Black, Honeycomb, Sedan. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:

Standard Type, Matte-Black, Honeycomb, Sedan, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

New Standard Replacement Driver Side Hood Hinge Assembly

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

New Standard Replacement Passenger Side Hood Hinge Assembly

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$7.99

New Standard Replacement Passenger Side Rear Bumper Cover Retainer

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$24.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Upper Grille Bracket, for Sedan and Hatchback Models. It is Designed to Replace Your Existing Grille Bracket. Check to Be Sure it Fits Your Vehicle.

Product Features:

For Sedan And Hatchback Models, Made Of Polypropylene & Glass fiber
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$11.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Passenger Side Grille Bracket, for Sedan and Hatchback. It is Designed to Replace Your Existing Grille Bracket. Check to Be Sure it Fits Your Vehicle.

Product Features:

For Sedan And Hatchback, Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$79.99

Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

from

$33.99

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

from

$31.99

Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
Easy Install – Less than 15 Minutes! based on average install time across all parts
No Special Tools Required
Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
Trilingual Install Instructions provided inside each package

Upgrade your 2016 Mazda 3 with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2016 Mazda 3, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mazda or enhancing its overall performance, Body Parts are key to keeping your 3 functioning at its best. At Advance Auto Parts, we offer a wide selection of 50 Body Parts for the 2016 Mazda 3, designed to meet your needs without breaking the bank. From Vehicle Hood replacements to Bodies and Fender Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2016 Mazda 3 at great prices. Our Body Parts inventory for this model ranges from just $3.99 to $519.99, with an average price of $74.30. Our 50 Body Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 2016 Mazda 3 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 Mazda 3 is always ready to roll. We’re committed to providing you with everything you need to keep your 3 in top shape, all in one place. Start shopping confidently below for your 2016 Mazda 3!

Best-Selling Vehicle Hoods for 2016 Mazda 3s

Enhance the driving experience in your Mazda with 3 quality Vehicle Hood components, starting at $12.99.

show more show less

from

$12.99

New Standard Replacement Passenger Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

New Standard Replacement Driver Side Hood Hinge

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$43.99

Exact fit original equipment design guarantees correct fit and function
Engineered and built to meet or exceed original equipment quality standards
Individually tested for performance and reliability
Hardened, nitride plated steel shaft provides optimal durability
Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
Heavy gauge steel body is electrostatically painted and heat cured to OE specs
Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
No special installation tools required
Consistent Performance In All Weather Conditions
Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle

Most Popular 2016 Mazda 3 Bodies and Fender Parts

Customize your Mazda with 8 Bodies and Fender Parts products like Fender Liners, Fenders, and Fender Braces, all priced under $159.99.

show more show less

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$12.99

New Standard Replacement Driver Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$159.99

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$97.99

New Standard Replacement Driver Side Fender

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

Protects vehicle’s hood from bugs or rock chips
Low profile, aerodynamic design
Installs in less than 5 minutes, no tools required
Custom fit exactly to your vehicle
Leather grain vinyl

from

$56.99

New Standard Replacement Passenger Side Fender Liner, Sedan And Hatchback Models

Product Features:

Sedan And Hatchback Models, Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$55.99

New Standard Replacement Driver Side Fender Liner, Sedan And Hatchback

Product Features:

Sedan And Hatchback, Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$12.99

New Standard Replacement Passenger Side Fender Brace

Product Features:

Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Top Picks for 2016 Mazda 3 Vehicle Mirrors

Upgrade Mazda 3s with top-quality Vehicle Mirrors parts, including 7 OEM and aftermarket selections for your 2016 model.

show more show less

from

$39.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$94.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$89.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$79.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$64.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$64.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$29.99

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

In-Demand Vehicle Windows for 2016 Mazda 3s

Select from 1 premium Vehicle Windows parts for your 2016 Mazda 3.

show more show less

from

$50.35

Window Regulator

Most Sold 2016 Mazda 3 Bumpers

Explore our best-selling Mazda parts for the 2016 3 among 5 OEM and aftermarket options starting from $3.99.

show more show less

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$86.99

New CAPA Certified NSF Certified Premium Replacement Rear Bumper Impact Absorber, Sedan Models

Product Features:

Sedan Models, Made Of Expanded Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$27.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Outer Rear Bumper Cover Reflector, Fits Passenger Side On Mazda 3 04-15/Mazda 5 12-13/Mazda 6 2014 and Driver Side for 2006-2010 Mazda 5. It is Designed to Replace Your Existing Bumper Cover Reflector. Check to Be Sure It Fits Your Vehicle.

Product Features:

Passenger Side On 2004-2014 Mazda 3, 2012-2013 Mazda, 2014 Mazda 6 And Driver Side 2006-2010 Mazda 5
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$27.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Standard Replacement Outer Rear Bumper Cover Reflector, Fits Driver Side On Mazda 3 04-15/Mazda 5 12-13/Mazda 6 2014 And Passenger Side 2006-2010 Mazda 5. It is Designed to Replace Your Existing Bmp Cover Reflector. Check To Be Sure it Fits Your Vehicle.

Product Features:

2004-2009 Mazda 3, 2012-2013 Mazda 5 And 2014 Mazda 6, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$3.99

New Standard Replacement Driver Side Front Bumper Cover Retainer

Product Features:

Made Of Polyoxymethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

FAQs for 2016 Mazda 3 Body Parts

Which Body Parts are best-sellers for 2016 Mazda 3s?

Out of 50 Body Parts that fit 2016 Mazda 3s, the following parts are the top sellers:

Hyundai Bumper Retainer (11910940) – $4.49
Mazda Molding Retainer (11910806) – $4.49
Hood Hinge (11754149) – $12.99

What’s the price range for 2016 Mazda 3 Body Parts?

Body Part prices for the 2016 Mazda 3 start at $3.99 and go up to $519.99 for the most premium parts.

What’s the average price of a Body Part for a 2016 Mazda 3?

The average price for Body Parts for the 2016 Mazda 3 is $74.30. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Mazda 3 model years?

Yes, we currently carry Body Parts for 13 model years of Mazda 3s between 2004 and 2019. Body Parts are bought most frequently for the following model years: 2019, 2015, 2014, 2013, 2012, 2011, 2010, 2009, and 2008.

What are the cheapest Body Parts for my 2016 Mazda 3?

The cheapest 2016 Mazda 3 Body Parts we carry in stock are:

Bumper Cover Retainer (11753559) – $3.99
Hyundai Bumper Retainer (11910940) – $4.49
Mazda Molding Retainer (11910806) – $4.49
New Standard Replacement Driver Side Grille Bracket, For Sedan And Hatchback Models (11727043) – $11.99
New Standard Replacement Passenger Side Grille Bracket, For Sedan And Hatchback (11726856) – $11.99

What types of Body Parts do you sell for my 2016 Mazda 3?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2016 Mazda 3:

Can I get help with 2016 Mazda 3 Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mazda Body Parts and more.

What is your return policy for Mazda 3 Body Parts?

Advance Auto Parts keeps returns simple. For new Mazda 3 Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 Mazda 3 Body Parts

KAI – New CAPA Certified Standard Replacement Driver Side Rear Bumper Cover Reflector (Part No.MA2830100C)

KAI – Fender (Part No.MA1241163PP)

KAI – Fender Liner (Part No.MA1249139)

Le Bra – Front End Cover (Part No.551163-01)

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.748-051)

Burco – Side View Replacement Mirror (Part No.4054)

MTC – Window Switch (Part No.O3060307241MTC)

KAI – Bumper Impact Absorber (Part No.MA1170111C)

KAI – Mirror Assembly: Driver Side, Power Adjustment, W/ Turn Signal, Foldable, 1 Pk (Part No.MA1320162)

K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.66593M)

Carquest Premium – Rain Sensor (Part No.BAA1137)

Carquest Premium – Rain Sensor (Part No.BAA1016)

KAI – Fender Brace (Part No.MA1244101)

KAI – Fender Brace (Part No.MA1245101)

KAI – New Standard Replacement Passenger Side Lower Grille Molding, Chrome, For Hatchback And Sedan (Part No.MA1215105)

KAI – New Standard Replacement Driver Side Lower Grille Molding, Chrome, For Hatchback And Sedan (Part No.MA1214105)

KAI – New Standard Replacement Grille, With Glossy Black Insert, Without Collision Warning (Part No.MA1200196)

KAI – New Standard Replacement Grille, Standard Type, Matte-Black, Honeycomb, Sedan (Part No.MA1200172)

KAI – Hood Hinge (Part No.MA1236122)

KAI – Hood Hinge (Part No.MA1236121)

KAI – Bumper Cover Retainer (Part No.MA1133101)

Dorman – Hyundai Bumper Retainer (Part No.963-557D)

KAI – New Standard Replacement Upper Grille Bracket, For Sedan And Hatchback Models (Part No.MA1207102)

KAI – New Standard Replacement Passenger Side Grille Bracket, For Sedan And Hatchback (Part No.MA1207105)

Dorman – Mazda Molding Retainer (Part No.963-237D)

StrongArm – Liftgate Lift Support: 21.25" Ext Length, 8.25" Travel, 94 Lbs of Force, 1 Pk (Part No.D6800)

Atlas Lift – Lift Support (Part No.LS10925)

Atlas Lift – Lift Support (Part No.LS11075)

KAI – Hood Hinge (Part No.MA1236141)

KAI – Hood Hinge (Part No.MA1236140)

StrongArm – Liftgate Lift Support: 24.18" Ext Length, 8.25" Travel, 92 Lbs of Force, 1 Pk (Part No.C7004)

Dorman – Mazda Molding Retainer (Part No.963-237D)

KAI – Fender Brace (Part No.MA1244101)

Le Bra – Custom Front End Cover (Part No.551563-01)

KAI – Fender (Part No.MA1240172)

Covercraft – Custom Hood Protector, Vinyl, Black (Part No.45710-01)

KAI – Fender Liner (Part No.MA1249145)

KAI – Fender Liner (Part No.MA1248145)

KAI – Fender Brace (Part No.MA1245101)

Burco – Side View Replacement Mirror (Part No.4709)

Burco – Door Mirror Replacement Glass (Part No.4709HRSG)

Burco – Door Mirror Replacement Glass (Part No.5739HRSG)

Burco – Door Mirror Replacement Glass (Part No.5739RSG)

Burco – Blind Spot Mirror Replacement (Part No.4522B)

Burco – Blind Spot Mirror Replacement (Part No.4709B)

Burco – Side View Replacement Mirror (Part No.4522)

TSK – Window Regulator (Part No.O3040690958TSK)

Dorman – Hyundai Bumper Retainer (Part No.963-557D)

KAI – Bumper Impact Absorber (Part No.MA1170111C)

KAI – New CAPA Certified Standard Replacement Outer Rear Bumper Cover Reflector (Part No.MA1185101C)

KAI – New CAPA Certified Standard Replacement Outer Rear Bumper Cover Reflector (Part No.MA1184101C)

KAI – Bumper Cover Retainer (Part No.MA1032110)