2016 Jeep Wrangler Performance and Racing Products
Find Your Specific 2016 Jeep Wrangler Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2016 Wrangler. Advance Auto Parts has popular Wrangler parts like Performance Ignition Products, Performance Exhaust Products, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Wrangler model years including
2014,
2015,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2016 Jeep Wrangler Performance and Racing Products below and start saving instantly.
Popular 2016 Jeep Wrangler Performance and Racing Products Categories
Essential Performance and Racing Products for 2016 Jeep Wranglers
Energy Suspension – BodyMntBshKt (Part No.2.4110G)
from
$398.99
BodyMntBshKt
Energy Suspension – Body Cab Mount Set (Part No.2.4105G)
from
$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Sway Bar Bushing Set (Part No.2.5102G)
from
$25.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – SwyBarBshKt (Part No.2.5113R)
from
$37.99
SwyBarBshKt
Bully Dog – Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (Part No.40417)
from
$469.99
This Bully Dog GT Platinum tuner is four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device.ÿ
Product Features:
See More
Product Features:
- Dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions.
- Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
- Product might not be available in all states due to local laws.
Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
Dynomax – Single – 2.25in Cat-Back Exhaust System – Super Turbo Muffler: Aluminized Steel (Part No.17463)
from
$189.99
Give your Jeep Cherokee XJ or Jeep Wagoneer exhaust system an upgrade with a DynoMax Super Turbo single 2.25-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 1986-1992 Jeep Cherokee and 1986-1990 Jeep Wagoneer; see product information for compatibility and engine specs
- COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipe, adapter and clamps
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 415 SCFM
- PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST¿–¿Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- ENGINEERED TO LAST┐–┐Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- SPECS — 2.25-in. straight cut oval tail pipe
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15855)
from
$794.99
The MagnaFlow 2000-2006 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15855 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15855 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
aFe POWER – Momentum GT Cold Air Intake: Gain up to 12 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-76213)
from
$483.99
Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.
Product Features:
See More
Product Features:
- Pro DRY S Filter Media
- 3 Layer Synthetic Oil-Free Media
- Washable And Reusable
- Huge 5 in. Flange w/Inverted Top Air Filter
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12092-1)
from
$428.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- 360 deg. Radial Flow Air Filter
- Pre-Oiled Media
- 5.5 in. 360 deg. Air Filter
- Dyno Tested Intake Tube
Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)
from
$114.99
Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/ Factory Diff Cover
- Mounting Hardware Included
Rugged Ridge – Skid Plate (Part No.DMC-16597.44)
from
$184.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 Inch black powder coated steel, these skid plates will help you slide over obstacles and
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/ Factory Diff Cover
- Mounting Hardware Included
- Jeep Logo
Rancho – rockGEAR Differential Cover (Part No.RS6209)
from
$222.99
Designed to shield your differential from direct contact in severe off-road conditions, the Rancho® rockGEAR® differential cover for the Jeep® Wrangler TJ and JK is manufactured from high-strength nodular iron for added axle and internal gear protection.
Product Features:
See More
Product Features:
- COMPATIBILITY — Fits Jeep Wrangler TJ and JK, Dana 44
- BUILT FOR THE TRAIL — Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
- ADDED PROTECTION — Mounts to Dana 44 differential for added axle and internal gear protection
- EXTRA STRENGTH — Ribbed external construction for added strength
- RESISTS CORROSION — Durable red powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST — High-strength ductile iron steel construction for added axle and internal gear protection
- ACCESS FOR FILLING — Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
Spectre – Diff Cover Dana 30 (Part No.6081)
from
$52.99
Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and fits 1999-2003 Dodge Dakota/Durango four wheel drive front, 1966-1970 Ford Bronco four wheel drive front, 1941-2003 Jeep CJ front, 1960-1974 IHC Scout front, and 1960-1967 IHC Scout rear differentials. Includes 10 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.
Product Features:
See More
Product Features:
- 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
- Bolts and gasket included
- Triple chrome plated for a lasting shine
- Precision engineered for a perfect fit
Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17222)
from
$91.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17289)
from
$204.99
DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- Polished finish for a show quality shine
- Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.63-1566)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.77-1566KP)
from
$449.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – MasterBshKt (Part No.2.18108R)
from
$777.99
MasterBshKt
Energy Suspension – Hyper-Flex System (Part No.2.18106G)
from
$673.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Dynomax – Exhaust Tail Pipe (Part No.44171)
from
$70.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – TAIL PIPE (Part No.56157)
from
$195.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Rancho – RS5000 Steering Damper (Part No.RS5405)
from
$83.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
aFe POWER – Power Module (Part No.77-46205)
from
$439.99
Power Module
Dynomax – INTERMEDIATE PIPE (Part No.52355)
from
$99.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Omix – Exhaust Pipe (Part No.17613.09)
from
$172.99
Is your Jeep’s exhaust pipe bent or rusted out? Trying to pass your annual state Inspection or restore your Jeep back to stock? Omix-ADA offers high quality exhaust pipes, gaskets, and hangers to keep you on the road and trail.
Product Features:
See More
Product Features:
- Aluminized Steel
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dynomax – Exhaust Intermediate Pipe (Part No.54522)
from
$88.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Upgrade your 2016 Jeep Wrangler with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2016 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Performance and Racing Products for the 2016 Jeep Wrangler, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2016 Jeep Wrangler at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $37.99 to $777.99, with
an average price of $327.61.
Our 31 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 2016 Jeep Wrangler without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Rancho, and more.
Rancho Performance and Racing Products
start at just $83.99 and boast an impressive 4 stars average rating from customers.
With 370 customer reviews and counting, our 2016 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2016 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place.
Start shopping confidently below for your 2016 Jeep Wrangler!
Best-Selling Performance Ignition Products for 2016 Jeep Wranglers
Enhance the driving experience in your Jeep with 1 quality Performance Ignition Product components, starting at $439.99.
aFe POWER – Power Module (Part No.77-46205)
from
$439.99
Power Module
Most Popular 2016 Jeep Wrangler Performance Exhaust Products
Customize your Jeep with 10 Performance Exhaust Products products
like Performance Exhaust Mufflers,
Performance Exhaust Pipes, and
Performance Exhaust System Kits, all
priced under $760.99.
Dynomax – Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval (Part No.53804)
from
$182.99
Dynomax Super Turbo performance mufflers’ exclusive, patented, flow director design channels exhaust flow, and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow, and reduce backpressure. Each muffler uses fibe
Product Features:
See More
Product Features:
- Large internal flow tubes improve exhaust flow and reduce backpressure
- Dyno proven to flow up to 700 SCFM
- Exclusive patented flow director channels exhaust flow and eliminates turbulence on most applications.
- Fiberglass matting technology absorbs unwanted interior resonance but maintains a mellow tone
- 1.75-inch to 3-inch inlet / outlet configurations
Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17222)
from
$91.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Dynomax – Dual – 2.5in Axle-Back Exhaust System – Super Turbo Muffler: Stainless Steel (Part No.39510)
from
$282.99
Give your Jeep Wrangler JK a dual exit exhaust system with a DynoMax Super Turbo dual 2.5-in. axle-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Jeep Wrangler JK; see product information for compatibility and engine specs
- PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement
- PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement
- COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
- PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST¿– Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- ENGINEERED TO LAST┐– Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- SPECS — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tips
Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39515)
from
$345.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK; see product information for compatibility and engine specs
- COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
- EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
- PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
- ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
- ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
- NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Polished Muffler: Stainless Steel (Part No.39522)
from
$296.99
Give your 2012-2018 Jeep Wrangler JK exhaust system an upgrade with a DynoMax single cat-back exhaust system. Comes with a DynoMax Ultra Flo SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK 3.6L V6 equipped
- PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
- PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
- COMPLETE SOLUTION — Includes DynoMax Ultra Flo« SS polished muffler, intermediate pipe, tail pipe, bracket and all necessary clamps
- COMPLETE SOLUTION — Includes DynoMax Ultra Flo® SS polished muffler, intermediate pipe, tail pipe, bracket and all necessary clamps
- IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
- SUPERIOR PERFORMANCE — Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
- SPECS ¿ 2.5-in. Outlet single wall, turned down spout
- SPECS ┐ 2.5-in. Outlet single wall, turned down spout
- NOTES — For off-road use only; exhaust exits before rear axle
Dynomax – Exhaust Intermediate Pipe (Part No.54522)
from
$88.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Flowmaster Inc. – Cat-back System 409S – Single Rear Exit – Force II – Mild Sound (Part No.817514)
from
$760.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. Force II systems deliver a moderate exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
Product Features:
See More
Product Features:
- Mandrel bent 16 gauge 409 stainless tubing
- Stock to mild exterior exhaust tone
- Includes hangers and hardware for easy installation
- Connects after factory catalytic converter
- Dyno tuned for maximum performance
Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Polished Muffler: Stainless Steel (Part No.39523)
from
$482.99
Give your 2012-2018 Jeep Wrangler JK exhaust system an upgrade with the original stainless-steel RockCrawler cat-back system from DynoMax. Comes with a DynoMax Ultra Flo SS polished muffler that features stainless-steel construction that delivers lasting protection and show-quality shine.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 2012-2018 four-door Jeep Wrangler JK 3.6L V6
- PERFORMANCE UPGRADE — Enhance your vehicle¿s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
- PERFORMANCE UPGRADE — Enhance your vehicle┐s exhaust system with this high clearance off-road RockCrawler design kit that can give an 11HP and 12-Lb. Ft. torque improvement
- COMPLETE SOLUTION — Includes DynoMax Ultra Flo« SS polished muffler, intermediate pipe, tail pipe, tip with band clamp and all necessary clamps
- COMPLETE SOLUTION — Includes DynoMax Ultra Flo® SS polished muffler, intermediate pipe, tail pipe, tip with band clamp and all necessary clamps
- IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
- SUPERIOR PERFORMANCE — Straight-through muffler design ensures unrestricted exhaust flow and reduces back pressure
- SPECS — 3-in. Outlet, single wall, buffed and polished stainless-steel slant cut tip
- NOTES — Tail pipe exits in rear
Dynomax – Single – 2.5in Cat-Back Exhaust System – Ultra Flo Welded Muffler: Stainless Steel (Part No.39517)
from
$388.99
Give your Jeep Wrangler JK’s exhaust system an upgrade with a DynoMax Ultra Flo welded 2.5-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for 2012-2018 Jeep Wrangler JK; see product information for compatibility and engine specs
- COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
- EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
- EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY — 2.5-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,000 SCFM
- PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
- ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
- ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
- NOTES — 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tip
Dynomax – TAIL PIPE (Part No.56157)
from
$195.99
Made from quality materials for durability, DynoMax® pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Top Picks for 2016 Jeep Wrangler Performance Steering Products
Upgrade Jeep Wranglers with top-quality Performance Steering Products parts, including 7 OEM and aftermarket selections for your 2016 model.
Rancho – RS5000 Steering Damper (Part No.RS5405)
from
$83.99
Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
- ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
Energy Suspension – SwyBarBshKt (Part No.2.5113R)
from
$37.99
SwyBarBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4110G)
from
$398.99
BodyMntBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4110R)
from
$398.99
BodyMntBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4112R)
from
$265.99
BodyMntBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4112G)
from
$265.99
BodyMntBshKt
Energy Suspension – SwyBarBshKt (Part No.2.5112G)
from
$38.99
SwyBarBshKt
In-Demand Performance Air Intake Kits for 2016 Jeep Wranglers
Select from 9 premium Performance Air Intake Kits parts for your 2016 Jeep Wrangler, with prices ranging from $199.99 to $499.99.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.77-1566KP)
from
$449.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.63-1566)
from
$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (Part No.71-1566)
from
$499.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Guaranteed To Increase Horsepower, With Million Mile Air Filter (Part No.57-1566)
from
$349.99
The K&N 57-1566 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Jeep Wrangler models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air with less effort than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a K&N embossed heat shield that mounts into the lower air box to act as a cover allowing cooler, denser air to be directed through a custom molded intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9007)
from
$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- WILL NOT VOID VEHICLE WARRANTY
aFe POWER – Momentum GT Cold Air Intake: Gain up to 9% More Airflow With Dry Air Filter For Easy Maintenance (Part No.50-70001D)
from
$498.99
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 5″ flange and is 9″ tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- High Quality 1-Pc. Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
- Built In Sight Window Provides Easy Inspection Of Filter
- Unique Filter-to-Housing Interface
aFe POWER – Momentum GT Cold Air Intake: Gain up to 12% More Airflow With Oiled Air Filter For Maximum Airflow (Part No.50-70001R)
from
$483.99
A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5″ round flange and is 8″ tall with an inverted top and features our pre-oiled Pro 5R media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installation
Product Features:
See More
Product Features:
- Pro 5R Filter Media
- 5-Layer Progressive Cotton Gauze Media
- Washable And Reusable
- Rotomolded Tube
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-12092-1)
from
$442.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses Pro DRY S Air Filter For Maximum Convenience
- 360 deg. Radial Flow Air Filter
- Dry Media
- 5.5 in. 360 deg. Air Filter
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12092-1)
from
$428.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- 360 deg. Radial Flow Air Filter
- Pre-Oiled Media
- 5.5 in. 360 deg. Air Filter
- Dyno Tested Intake Tube
Most Sold 2016 Jeep Wrangler Performance Suspension Products
Explore our best-selling Jeep parts for the 2016 Wrangler among 1 OEM and aftermarket options starting from $777.99.
Energy Suspension – MasterBshKt (Part No.2.18108R)
from
$777.99
MasterBshKt
Top-Rated Performance and Racing Products Brands For Your 2016 Jeep Wrangler
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2016 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from Rancho, and more. Performance and Racing Products from these brands that fit a 2016 Wrangler start at just $83.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Rancho 2016 Jeep Wrangler Performance and Racing Products
When it comes to maintaining or upgrading your 2016 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Rancho ticks all of those boxes. We offer a wide selection of Rancho Performance and Racing Products, specifically designed for the 2016 Jeep Wrangler. With over 2 Rancho brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $83.99, with an average price of just $153.49. Plus, with over 3 customer reviews and an average rating of 4 stars, you can trust that our Rancho Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2016 Jeep Wrangler Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2016 Jeep Wranglers?
Out of 31 Performance and Racing Products that fit 2016 Jeep Wranglers, the following parts are the top sellers:
- RS5000 Steering Damper (18580291) – $83.99
- Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99
- Super Turbo Muffler: Direct Fit, Stainless Steel, 18" L, 2.5" In, 2.5" Out, Oval (11693662) – $182.99
What’s the price range for 2016 Jeep Wrangler Performance and Racing Products?
Performance and Racing Product prices for the 2016 Jeep Wrangler start at $37.99 and go up to $777.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2016 Jeep Wrangler?
The average price for Performance and Racing Products for the 2016 Jeep Wrangler is $327.61. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?
What are the cheapest Performance and Racing Products for my 2016 Jeep Wrangler?
The cheapest 2016 Jeep Wrangler Performance and Racing Products we carry in stock are:
- SwyBarBshKt (10600161) – $37.99
- SwyBarBshKt (10600210) – $38.99
- RS5000 Steering Damper (18580291) – $83.99
- Exhaust Intermediate Pipe (20200840) – $88.99
- Ultra Flo Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (18290011) – $91.99
What are the top-rated Performance and Racing Products that fit the 2016 Jeep Wrangler?
Out of 370 reviews by customers, our 2016 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2016 Jeep Wrangler and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (10443496) – $449.99
- Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (10402472) – $349.99
- Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (11405625) – $499.99
- Performance Steering Products
- Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (10443496) – $449.99
- Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (10402472) – $349.99
- Cold Air Intake: Adds Up To 7 Horsepower, With Million Mile Air Filter (11405625) – $499.99
What types of Performance and Racing Products do you sell for my 2016 Jeep Wrangler?
As of 2/5/25, these are some of the most in-demand types of Performance and Racing Products for a 2016 Jeep Wrangler:
Can I get help with 2016 Jeep Wrangler Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Wrangler Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
