2016 Jeep Wrangler Bodies and Fender Parts

New, Standard Replacement Passenger Side Fender Flare Bracket

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

Required part for oval tubes. Vehicle specific mount kit insures proper fit. 5 year warranty.

Product Features:

• Required Part For Oval Tubes
• Vehicle Specific Mount Kit Insures Proper Fit
• 5 Year Warranty

Bolts to your existing factory spare tire mount and relocates the tire two inches up and out. Features 5×4.5 inch and 5×5.5 inch wheel bolt patterns and tough powder coated black textured finish.

Product Features:

• Black Powder Coated
• 5×4.5 in. and 5×5.5 in. Wheel Bolt Patterns
• Bolts To Your Existing Factory Spare Tire Mount
• Relocates the tire two inches up and out

New Standard Replacement Front Lower Valance Panel

Product Features:

• Made Of Olefinic Thermoplastic Elastomer
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Spare Tire Bracket, Includes High Mount Stop Lamp

Product Features:

• Includes High Mount Stop Lamp, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

BodyMntBshKt

These over-built tubular fenders were designed for maximum suspension articulation while still maintaining a factory-style inner fender liner. Tough 0.120 inch wall tube is attached to 1/8 inch steel plating for one tough fender design.

Product Features:

• Steel Construction
• Primer
• Added Tire Clearance
• Tube Design
• Left Side Only

Interior Panel Retai

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Constructed of powder coated Brite-Tread aluminum.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Classic Diamond Style Design
• Protected By A BriteGard Powder Coat Finish
• Compliment Brite-Tread Running Boards

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

When it comes to your truck or SUV, you want quality, style, protection, and durability at a price you can afford. TrailFX offers you an array of products, whether it is for work or play, TrailFX has something for everyone needs. Step bars to grille guards, tool boxes to bed protection, whatever your need, we have you covered. TrailFX sources high quality products for trucks, SUVs, and cars at a price you can afford. Whether you need a nerf step for your SUV, a tool box for your truck, or a bug shield for your car, we want to make sure that you are supplied the quality, style, and durability you expect from a product.

Product Features:

• All Brackets Are Welded To The Tube For Strength And Support
• Designed To Fit Close To The Body For Protection To The Rocker Panel Area
• Rocker Panel Mount
• Easy To Install

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Plastic Construction
• Meets Quality Standards
• Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
• Easy To Install

New CAPA Certified Standard Replacement Driver Side Fender Splash Shield, With Aluminum Pin

Product Features:

• With Aluminum Pin, Made Of High Density Polyethylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Skyjacker was established in 1974. We grew from a one bay garage into an international manufacturing warehouse. Skyjacker continues to strive to stay ahead of the game in the aftermarket industry. Skyjacker builds quality suspension products.

Product Features:

• Made From Premium Materials
• Meets The Highest Quality Standards
• Provide A Smooth, Comfortable Ride
• Maintain That Factory Ride Quality
• Easy Installation

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Jeep Wrangler TJ (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

• Metal And Rubber Construction
• Meets Quality Standards
• Bump Stops Prevent Expensive Body Damage To Lifted Jeep Vehicles
• Easy To Install

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Trim rings are available in either Satin Black Powdercoated or Polished Stainless Steel. These trim rings are a great way to protect the wheel lip and tire bead. They also allow you to change the look of your wheels with just a few bolts.

Product Features:

• Polished Stainless Steel
• Protects The Wheel Lip and Tire Bead
• Change The Look of Your Wheels w/ Just a Few Bolts
• For Use w/ Rugged Ridge Wheels Only

Trim rings are available in either Satin Black Powdercoated or Polished Stainless Steel. These trim rings are a great way to protect the wheel lip and tire bead. They also allow you to change the look of your wheels with just a few bolts.

Product Features:

• Satin Black Powder Coated
• Protects The Wheel Lip and Tire Bead
• Change The Look of Your Wheels w/ Just a Few Bolts
• For Use w/ Rugged Ridge Wheels Only

New Standard Replacement Passenger Side Rear Fender Liner

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

For those who eat, sleep and breathe off-roading, ARIES fender flares show off your off-road tires better than factory flares, and they feature strong, lightweight aluminum construction to easily stand up to the elements. These front and rear inner fender liners are designed to mount with ARIES Jeep JK fender flares and provide ultimate protection for your engine compartment against mud, water and road debris. ARIES Jeep inner fender liners are constructed from welded aluminum to not only be lightweight and rust-free, but also to offer better strength than the plastic factory fender liners. They are also covered in a highly durable carbide black powder coat finish for maximum corrosion protection. ARIES fender liners install securely in conjunction with ARIES fender flares and include all necessary hardware for a complete installation (some drilling and rivet nut installation required). Jeep fender liners are also available in individual sets for the front or rear.

Product Features:

• Helps protect engine compartment against mud, water and other debris
• Replaces plastic factory fender liners on the front and rear
• Welded aluminum construction to be strong, lightweight and rust-free
• Highly durable carbide black powder coat finish for maximum corrosion resistance
• Designed for installation with ARIES fender flares #1500201 and #2500201
• Some drilling and rivet nut installation required

Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 60 To 180 Minute Professional Installation Time
• Q235A Steel Finished With A Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• Q235A Steel Finished With A Textured Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease: Rounded Step Shape Prevents Snow And Dirt Accumulation
• Provides Moderate Protection Against Road Hazards And Debris

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 1 Pad On The Bar
• 30 To 60 Minute Professional Installation Time
• Q235A Steel Finished With A Gloss Black Powder Coat Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab
• Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Provides Moderate Protection Against Road Hazards And Debris