2016 Dodge Challenger Performance Air Intake Kits

Essential 2016 Dodge Challenger Performance Air Intake Kits

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 9 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-10922)

Magnum FORCE Cold Air Intake: Gain up to 9 Horsepower! Dry Air Filter For Easy Maintenance

from

$391.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro DRY S Air Filter For Maximum Convenience
  • 14% cfm Flow Gain
  • 360 deg. Radial Flow Air Filter
  • 3 Layer Cotton/Synthetic Gauze Media
See More

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter (Part No.71-1542)

Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter

from

$399.99
The K&N 71-1542 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces the restrictive factory air filter and air intake housing on some Dodge Challenger/Charger/Magnum and Chrysler 300/300C models. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated tube features a welded, engraved K&N plate giving you a clean, high-performance look under the hood. The intake tube accommodates the factory inlet air temperature sensor and crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-1542 vehicle applications to determine the legal status for each vehicle.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.57-1543)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9036)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

K&N – Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter (Part No.57-1542)

Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9003)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

aFe POWER – Momentum GT Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-72201)

Momentum GT Cold Air Intake: Gain up to 18 Horsepower! Dry Air Filter For Easy Maintenance

from

$442.99
Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:
  • 1-Piece Housing
  • 5 Layer Performance Air Filter
  • Premium Hardware
See More

aFe POWER – Track Series Cold Air Intake: Gain up to 30 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.57-10001R)

Track Series Cold Air Intake: Gain up to 30 Horsepower! Oiled Air Filter For Maximum Airflow

from

$756.99
5-Layer Performance Air Filter:This intake system utilizes an oil free, 7″ tall inverted top conical 360-degree radial flow performance air filter with five layers of cotton gauze media providing maximum performance. It features a carbon fiber top, made specifically for the Demon’s Track Series intake system. Cool air is gathered from the factory hood scoop and factory headlight air inlet.

Product Features:
  • Outflows factory intake by 30%
  • Measured flow: 930CFM @ 7″ H20
  • Carbon fiber filter top made exclusively for the Dodge Demon intake
  • High quality plastic housing seals directly to the factory hood scoop, collecting cool outside air, while another scoop connects to the factory headlight air inlet
See More

K&N – Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter (Part No.71-2545)

Cold Air Intake: Adds Up To 9 Horsepower, With Million Mile Air Filter

from

$399.99
The K&N 71-2545 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated finish tube features an engraved K&N plate welded on to which gives it a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-2545 vehicle applications to determine the legal status for each vehicle.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 23 Horsepower, With Million Mile Air Filter (Part No.69-2553TTK)

Cold Air Intake: Adds Up To 23 Horsepower, With Million Mile Air Filter

from

$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 22 Horsepower, With Million Mile Air Filter (Part No.57-1565)

Cold Air Intake: Adds Up To 22 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12162)

Magnum FORCE Cold Air Intake: Gain up to 17 Horsepower! Oiled Air Filter For Maximum Airflow

from

$429.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses 360 deg. Radial Flow Air Filter
  • 5 Layer Oiled Cotton Gauze Media
  • Washable And Reusable Air Filter
  • Durable 16 Gauge Black Powder coat Housing
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9028)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
See More

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.90280K)

Cold Air Intake Kit Engineered to Add Horsepower & Torque

from

$199.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • WILL NOT VOID VEHICLE WARRANTY
  • Product might not be available in all states due to local laws.
See More

K&N – Cold Air Intake: Adds Up To 22 Horsepower, With Million Mile Air Filter (Part No.63-1565)

Cold Air Intake: Adds Up To 22 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter (Part No.63-1564)

Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter

from

$349.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

K&N – Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter (Part No.69-2526TP)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

from

$399.99
K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

2016 Dodge Challenger Performance Air Intake Kits

Maybe you’re in the middle of a full rebuild of that 2016 Dodge Challenger. Maybe you just need a couple of Performance Air Intake Kits. Either way, Advance Auto Parts has 21 different Performance Air Intake Kits in our inventory ranging from $199.99 to $1,233.99. That means you can find the exact parts or products you need to keep that 2016 Dodge Challenger running smoothly.

Performance Air Intake Kits are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 2016 Dodge Challenger. K&N, Spectre, and aFe POWER are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Air Intake Kits for your 2016 Dodge Challenger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 921 reviews in this category, some of the top rated parts include Cold Air Intake: Adds Up To 14 Horsepower, With Million Mile Air Filter with 4.3 stars and Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter with 4.7 stars.

So if you’re in the market for aftermarket Performance Air Intake Kits to keep your 2016 Dodge Challenger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Air Intake Kits Brands To Make Your 2016 Dodge Challenger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2016 Dodge Challenger demands trusted brand parts and products to keep it running. Many trusted brands of Performance Air Intake Kits make up Advance Auto Parts’ inventory, and all are ready to help make your Challenger the best it can be. Be sure to browse some of our top Performance Air Intake Kits brands and parts.

Popular K&N Performance Air Intake Kits

We carry K&N parts in our stock across Engine Cold Air Intakes categories, plus more. For a 2016 Dodge Challenger, our most popular K&N Performance Air Intake Kits include:
Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter
from $349.99
(32)
Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits

Top 2016 Dodge Challenger Performance Air Intake Kits from K&N

K&N products are another trusted brand when it comes to Performance Air Intake Kits for your 2016 Dodge Challenger. Popular K&N parts include:
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
from $399.99
(14)
Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter
Performance Air Intake Kits

FAQs for 2016 Dodge Challenger Performance Air Intake Kits

What are the most purchased Performance Air Intake Kits for the 2016 Dodge Challenger?

Out of 21 Performance Air Intake Kits for the 2016 Dodge Challenger, the most popular in our inventory are:
Cold Air Intake Kit Engineered to Add Horsepower & Torque
from $199.99
This product is not rated
Cold Air Intake Kit Engineered to Add Horsepower & Torque
Engine Cold Air Intakes
Cold Air Intake Kit Engineered to Add Horsepower & Torque
from $199.99
This product is not rated
Cold Air Intake Kit Engineered to Add Horsepower & Torque
Engine Cold Air Intakes

What are the top-rated 2016 Dodge Challenger Performance Air Intake Kits?

Top-rated Performance Air Intake Kits for your 2016 Dodge Challenger based on customer reviews/ratings are:
Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter
from $349.99
(9)
Cold Air Intake: Adds Up To 8 Horsepower, With Million Mile Air Filter
“Just installed this CAI on my 2023 V6 Challenger in under one hour. Easy install with simple hand tools and no issues. Huge difference in engine growl”
Cold Air Intake: Adds Up To 22 Horsepower, With Million Mile Air Filter
from $349.99
(4)
Cold Air Intake: Adds Up To 22 Horsepower, With Million Mile Air Filter
“Great kit,easy installation. Fantastic performance!”