2016 BMW Z4 Cooling and Climate Controls

Essential 2016 BMW Z4 Cooling and Climate Controls

Dorman – Coolant Air Bleeder Screw (Part No.902-404)

Coolant Air Bleeder Screw

from

$4.99
This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:
  • Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw
  • Durable materials – designed to withstand high cooling system temperatures and pressures
  • Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Coolant Temperature Sensor with O-Ring (Part No.WTC1038)

Coolant Temperature Sensor with O-Ring

from

$26.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Thermostat Kit: Gasket Included (Part No.85957)

Thermostat Kit: Gasket Included

from

$185.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • 100% virgin resin material to insure durability
  • 100% leak tested
  • Direct-fit replacement for ease of installation
  • Includes quality thermostat
See More

Dorman – Radiator Fan Assembly (Part No.620-981)

Radiator Fan Assembly

from

$861.99
This engine cooling fan assembly is precision-engineered to match the fit and performance of the stock radiator fan on specific vehicle years, makes and models. It has been rigorously tested to ensure it cools as effectively as the original part..

Product Features:
  • Ideal replacement – this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles.
  • Complete package – assembly is designed with the same materials and components as the original part
  • Quality assured – motors are tested in laboratory settings to ensure performance
  • Cost effective and reliable – trustworthy manufacturing for far less than same part at the dealership
See More

Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Ultra Grey RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Vemo – Drier Desiccant Element (Part No.R1043258918VMO)

Drier Desiccant Element

from

$70.33
Drier Desiccant Element

Rein – Rein Cooling Hose (Part No.G2021454565RIN)

Rein Cooling Hose

from

$48.63
Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:
  • Direct OE replacement for European cars
  • Integrated thermoplastic couplings and O-ring seals
  • Designed to go directly from the shelf to the vehicle. No cutting is ever needed
  • All cooling-water hose inner linings are resistant to electrochemical cracking
  • high strength and resistance to oil, mud, salt, road debris, and ozone
  • Resistance to distilled water and water ethylene glycol mixtures
  • Resistance to air temperatures of up to 135C
See More

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

Ultra Grey RTV Gasket Maker (9.5 oz.)

from

$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:
  • Designed specially for high-torque and high vibration applications
  • Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
  • OEM specified
  • Low-odor, non-corrosive formula
  • Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76929)

Blower Motor: With Wheel

from

$105.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Rein – Expansion Tank (Part No.EPT0028)

Expansion Tank

from

$79.99
Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
  • Manufactured to strict engineering standards/specifications in materials and tolerances
See More

APA/URO Parts – Radiator Mount (Part No.G1020388318APA)

Radiator Mount

from

$28.70
Radiator Mount

Graf – Graf Water Pump (Part No.G3000457932GRA)

Graf Water Pump

from

$57.83
The Graf Water Pump contains no remanufactured parts and is produced using an optimized all metal impeller design to assist in cooling under high RPM, and performance demands. Selection of raw materials, reliability of machinery and production processes, stringent controls throughout the production process, from melting to fitting, as well as reliability tests performed using equipment able to determine true performance, go to ensure this product is a real guarantee of safety and long life. The Graf water pump is centrifugal in type and comprises a bladed rotor linked by means of a shaft (which rotates on bearings housed in a support) to the drive gear; the seal between the pump and the motor block is guaranteed by a gasket, while the inside of the pump is guaranteed by a mechanical seal. Component parts: Impeller: supplies the fluid with the necessary energy to cover the entire cooling circuit. Mechanical seal: ensures fluid seal inside the pump. Bearing: transmits movement to the impeller and supports any ventilation parts. Entrainment part: for transmitting movement to the bearing. Pump body: supports the basic pump component parts and conveys the coolant in the motor block.

Product Features:
  • All the component parts fitted are pre-tested to evaluate durability, performance and reliability.
  • The bearings undergo a durability test equivalent to nominal lifespan and are then inspected to assess integrity.
  • The mechanical seals are tested in extreme coolant temperature conditions according to predefined cycles.
  • The shape of the impellers is optimized thanks to the use of prototypes on which flow and performance tests are performed.
  • On both the entrainment parts and the bodies, the choice of materials and/or technologies different to original ones is made on the basis of structural and mechanical tests.
  • After assembly all the pumps undergo seal tests on units that reject those with leaks above set limits.
See More

Original Equipment – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G5030151345OEA)

Engine Cooling Auxiliary Thermo-Fan Switch

from

$34.67
The Original Equipment Engine Cooling Thermo-Fan Switch is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Behr – A/C Compressor w/ Clutch, New (Part No.R1000397629BEH)

A/C Compressor w/ Clutch, New

from

$493.95
Behr manufactures a 100% new A/C Compressor with clutch assembly, that is the same quality fit and performance of the OE compressor it replaces.

Product Features:
  • OEM Quality Direct fit Application
  • Brand new with no remanufactured parts
  • Equipped with a new clutch assembly
  • OEM supplier to many European vehicle manufacturers
See More

ATE – ATE ABS Speed Sensor (Part No.N6030569478ATE)

ATE ABS Speed Sensor

from

$117.92
The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:
  • OE quality direct fit application
  • Manufactured to meet or exceed OE requirements and testing
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference
See More

Rein – Cap-Expansion Tank (Part No.CPE0035)

Cap-Expansion Tank

from

$22.99
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances.
  • Direct fit.
  • Meets or exceeds pressure specifications demanded by the OE manufacturer.
  • Produced by an original equipment supplier.
See More

Carquest Premium – A/C Refrigerant Temperature Sensor (Part No.WTA2184)

A/C Refrigerant Temperature Sensor

from

$167.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Valeo – Air Flap Actuator (Part No.R2046700055VAL)

Air Flap Actuator

from

$125.13
Air Flap Actuator

Motorad – Integrated Thermostat Housing: With Sensor, 226 Degrees (Part No.822-226)

Integrated Thermostat Housing: With Sensor, 226 Degrees

from

$146.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

APA/URO Parts – Radiator Mount (Part No.G102075950APA)

Radiator Mount

from

$2.76
Radiator Mount

Vemo – Coolant Level Sensor (Part No.G1050226145VMO)

Coolant Level Sensor

from

$16.58
Coolant Level Sensor

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

AC Pressure Sensor

from

$85.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
  • Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging
See More

Carquest Premium – Radiator (Part No.432528)

Radiator

from

$124.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

APA/URO Parts – Radiator Drain Plug (Part No.G1060277966APA)

Radiator Drain Plug

from

$5.69
Radiator Drain Plug

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Rein – Water Pump Service Kit (Part No.WPS0520)

Water Pump Service Kit

from

$1029.99
Water Pump Service Kit

Elring – Air Temp Sensor O-Ring (Part No.C6005405869ELR)

Air Temp Sensor O-Ring

from

$3.51
Air Temp Sensor O-Ring

Corteco – Water Pipe O-Ring (Part No.G2026279597CFW)

Water Pipe O-Ring

from

$1.32
Water Pipe O-Ring

2016 BMW Z4 Cooling and Climate Controls

You count on your 2016 BMW Z4 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 66 Cooling and Climate Controls ranging in price from $2.58 to $1,029.99, you’re sure to find everything you need for your 2016 BMW Z4.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 21 different brands like Permatex, Dorman, and Carquest Premium. 2016 BMW Z4 Cooling and Climate Controls start as low as $2.58!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 964 extensive product reviews on 2016 BMW Z4 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Electric Water Pump: New, Aluminum Housing with 4.5 stars and Radiator with 5.0 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2016 BMW Z4 below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2016 BMW Z4

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2016 BMW Z4 running right for years to come. In our inventory you’ll find brands like Permatex, Dorman, Carquest Premium, and even more.

Popular Motorad Cooling and Climate Controls

You’ll find popular Motorad brand products across Engine Cooling Parts. All are waiting to get your 2016 BMW Z4 back on the road. Some of the top-rated Motorad products in these categories are:
Integrated Thermostat Housing: With Sensor, 226 Degrees
from $146.99
(1)
Integrated Thermostat Housing: With Sensor, 226 Degrees
Thermostat and Water Outlet Assemblies

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2016 BMW Z4, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Gaskets
Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(9)
Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ
Water Pump Gaskets
Ultra Grey RTV Silicone Gasket Maker, 13 OZ
from $26.99
(7)
Ultra Grey RTV Silicone Gasket Maker, 13 OZ
Engine Water Pump Outlet Pipe Gaskets

FAQs for 2016 BMW Z4 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2016 BMW Z4?

Out of 66 Cooling and Climate Controls for the 2016 BMW Z4, the most popular in our inventory are:
Coolant Air Bleeder Screw
from $4.99
(5)
Coolant Air Bleeder Screw
Engine Coolant Vent Screws
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Water Pump Housing Gaskets

What are the top-rated 2016 BMW Z4 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2016 BMW Z4 based on customer reviews/ratings are:
Engine Electric Water Pump: New, Aluminum Housing
from $568.99
(4)
Engine Electric Water Pump: New, Aluminum Housing
“Matches the OE pump exactly. Even the same manufacturer. Comes with the three mounting bolts, so you don’t need to buy them separately.”
Radiator
from $289.99
(2)
Radiator
“Fit perfect in 2008 (N54) Bmw 335i . Excellent part.”
Blower Motor: With Wheel
from $152.99
(2)
Blower Motor: With Wheel
“When I ordered this online the gal that helped me was excellent!! The blower sounds a little louder than the original but it works great.”