2016 BMW X4 Cooling and Climate Controls

Name: Engine Coolant Temperature Sensor
Brand: Delphi
SKU: TS10270
Price: 25.99 USD

Below you will find various in-demand BMW Cooling and Climate Controls, components and accessories for your 2016 X4. Advance Auto Parts has popular X4 parts like Air Conditioning Parts, Blower Motor and Related Products, Engine Cooling Parts and more. You’ll also find aftermarket and OEM Cooling and Climate Controls for other X4 model years including 2015, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 and more. Select a category of 2016 BMW X4 Cooling and Climate Controls below and start saving instantly.

Popular 2016 BMW X4 Cooling and Climate Controls Categories

Water Pump Housing Gaskets

Radiators

Water Pumps

Blower Motors

AC Compressor Without Clutch

Thermostats

Thermostat and Water Outlet Assemblies

Coolant Reservoirs

Engine Coolant Vent Screws

Coolant Temperature Sensors

AC Condenser and Receiver Drier Assemblies

Heater Cores

Blower Motor Control Units

Engine Water Pump Inlet Pipe Gaskets

Coolant Reservoir Caps

Blower Motor Resistors

AC Condensers

Water Pump Install. Kits

AC Evaporators

Engine Coolant Pipes

Water Pump Bolts

Engine Auxiliary Water Pumps

Accumulator and Receiver Driers

ABS Speed Sensors

Water Pump Gaskets

HVAC Heater Assemblies

Expansion Valve and Orifice Tubes

AC High Pressure Side Switches

HVAC Blower Motor Regulators

AC Drive Belt Tensioner Pulleys

Coolant Level Sensors

AC Thermal Evaporator Switches

Heater Core Seals

AC Temperature Adjuster Flap Motors

AC Expansion Valve O-Rings

Engine Coolant Thermostat Housing Bolts

Essential Cooling and Climate Controls for 2016 BMW X4s

from

$25.99

Delphi temperature sensors are built with the latest OE technology; Delphi temperature sensors use durable, one-piece design; Delphi temperature sensors are impervious to electrical noise and interference.

Product Features:

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$169.02

Blower Motor Regulat

from

$112.65

Blower Motor Regulat

from

$5.81

Water Pump Bolt Set

from

$171.99

Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.

Product Features:

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$2.99

VDO now offers an Electric Water Pump with an integrated Control Unit. VDOs Electric Water Pump is the exact OEM part and manufactured to the highest quality and original equipment specifications. It is identical in fit, form, and function and provides the exact quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Our water pump is built in OE ISO TS certified facilities and manufactured to the highest quality standards. VDO also supplies separately the mounting screws associated with installation of our water pump. The Electric Water Pump is mounted with 3 screws. Please refer to OE application and guidelines for screw selection as three variants exist. With VDO you can count on dependable performance and robust design by being original equipment while still maintaining a competitive price.

Product Features:

Plated for corrosion resistance
Made in ISO certified facilities
OEM Product
26 mm

from

$35.48

ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor

from

$519.99

Precise engine temperature control through variation of coolant volume flow
Use of energy meeting the demands
Operation independent from main cooling circuit and combustion engine operation
Vehicle Specific fit and function
Made in ISO certified facilities OEM Product

from

$72.99

Rein Automotive OE quality expansion tanks, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life.

Product Features:

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$269.40

Plastic Tank / Aluminum Core Radiator The Nissens Radiator flat tube and double folded fin design offers a significantly better cooling capacity and provides a stronger exterior resisting impacts from stones. This advanced design helps to prevent damage which would negatively affect the cooling capacity and engine performance.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$180.71

ACM manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Meets or exceeds OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Provides exceptional reliability.

from

$1029.99

Water Pump Service Kit

from

$129.92

Intelligent control systems from MAHLE are used in millions of applications worldwide to provide needs-based precision temperature control. Simple, effective, and tried and tested millions of times over: thermostat inserts from MAHLE provide meticulous regulation of coolant circuits around the world up to approximately 20 m3/h, and ensure ideal operating temperatures in light vehicles, trucks, stationary engines, and also agricultural and construction machinery. Wax elements are at the heart of all MAHLE thermostats and thermostat inserts. These maintenance-free, durable elements have proved their worth in millions of applications. MAHLE, Manufactures a wide range of variants with actuating forces of between 30 N and 2,500 N, small or large displacements, and for a large number of regulation ranges within a temperature span of -20C to +130C.

Product Features:

OE quality and design
Maintenance-free, durable elements

from

$14.99

Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$259.26

ACM manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.

Product Features:

OE-Equivalent.
Direct Fit Replacement.
High quality OE electrical components.
OE quality brushes and bearings.
Balanced rotor assembly.

from

$27.06

Coolant Level Sensor

from

$26.99

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$33.51

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old quick connect fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$38.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$85.99

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$195.99

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$137.17

Air Flap Actuator

from

$126.17

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$25.99

Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$152.99

Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$204.99

Rein OE Quality Air Conditioning Evaporator. Pressure tested before leaving the factory. Designed according to OE specifications, ensuring fit and function are identical to the original evaporator.

from

$53.99

Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$6.99

Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

Upgrade your 2016 BMW X4 with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2016 BMW X4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Cooling and Climate Controls are key to keeping your X4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Cooling and Climate Controls for the 2016 BMW X4, designed to meet your needs without breaking the bank. From Air Conditioning Part replacements to Blower Motor and Related Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2016 BMW X4 at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.55 to $1,115.82, with an average price of $162.51. Our 68 Cooling and Climate Controls in stock come from 21 trusted brands, so you’re sure to find the right part for your 2016 BMW X4 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2016 BMW X4, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, Dorman, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. Dorman and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $4.99, and at an average 4 stars rating. With 908 customer reviews and counting, our 2016 BMW X4 Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2016 BMW X4 is always ready to roll. We’re committed to providing you with everything you need to keep your X4 in top shape, all in one place. Start shopping confidently below for your 2016 BMW X4!

Best-Selling Air Conditioning Parts for 2016 BMW X4s

Enhance the driving experience in your BMW with 25 quality Air Conditioning Part components, starting at $1.55.

show more show less

from

$35.48

ACM is a supplier of Original Equipment quality climate control products. Heater / Evaporator Temperature Sensor

from

$119.46

The ATE OE quality ABS speed sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as original equipment.

Product Features:

OE quality direct fit application
Manufactured to meet or exceed OE requirements and testing
Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference

from

$97.99

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$1115.82

ACM manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Brand new with no remanufactured parts
OE supplier to many vehicle manufacturers
Includes installation instructions and all necessary fitment components

from

$1010.31

ACM manufactures a new A/C Compressor with clutch assembly that is the same quality fit and performance of the OE compressor it replaces.

Product Features:

OEM Quality Direct fit Application
Brand new with no remanufactured parts
OE supplier to many vehicle manufacturers
Includes installation instructions and all necessary fitment components

from

$598.99

As one of the world’s largest OE suppliers of A/C compressors, DENSO units are specified by most major vehicle manufacturers. DENSO First Time Fit A/C compressors are manufactured and tested to the strictest OE standards for unparalleled performance. At DENSO, we bring together everything we know as an air conditioning systems manufacturer to bring you the highest quality line of factory-new compressors available. When it comes to new compressors, you can’t do better than going with a unit manufactured by the OE supplier. At DENSO we know these units better than anyone because we originally designed them. Our compressors are built to meet DENSO’s unsurpassed reputation for technological superiority. You can relax knowing DENSO will give you the right part and the right fit the first time.

from

$527.99

from

$374.74

A/C COMPRESSOR

from

$204.99

Rein OE Quality Air Conditioning Evaporator. Pressure tested before leaving the factory. Designed according to OE specifications, ensuring fit and function are identical to the original evaporator.

from

$195.99

This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
Our condensers are manufactured from rigid design standards to fit OEM dimensions.
Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.

from

$173.16

A/C Condenser

from

$169.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$129.99

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
O-Rings and gaskets necessary for installation are included.

from

$126.17

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$98.64

Behr manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE unit it replaces.

Product Features:

OEM Quality and Direct fit Application
Manufactured to exact OEM specifications for design and performance.

from

$85.99

Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

from

$84.99

New Platinum Pro A/C Condenser, 2.0/3.0 Liter Engines

Product Features:

2.0/3.0 Liter Engines, Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$80.01

The ACM A/C Expansion Valve that is manufactured to exact OEM specifications for quality fit and performance.

Product Features:

OE-Equivalent and Direct fit Application.
Meet or exceed OEM specifications.
Utilizes the factory style fittings and connectors
Compatible with R12 and R134a refrigerant. Installation Note: Receiver driers or accumulators, and expansion devices should be replaced any time an A/C system is opened. Individual A/C component warranties may be void if these items are not replaced.

from

$76.99

Air conditioning stopped working? It could be as simple as the pressure switch. This replacement A/C transducer switch is the fix for corroded terminals or a broken connector on the original switch. A direct replacement to restore air conditioning.

Product Features:

Direct replacement – this A/C transducer switch is an exact replacement for the original switch
Simple repair – this A/C switch replaces an existing switch with corroded terminals or a broken connector
Easy installation – no special tools required
Quality tested – switch has been tested to ensure proper fit and function

from

$40.96

A/C Pressure Switch

from

$34.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.

from

$22.49

The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
O-Rings necessary for installation are included.

from

$14.99

All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
All accumulators and receiver driers are helium leak tested prior to packaging.
O-Rings necessary for installation are included.
O-Rings necessary for installation are included.

from

$2.25

ACM is a supplier of Original Equipment quality climate control products.

from

$1.55

Air Conditioning O-Ring

Most Popular 2016 BMW X4 Blower Motor and Related Products

Customize your BMW with 6 Blower Motor and Related Products products like Blower Motors, Blower Motor Resistors, and Blower Motor Control Units, all priced under $356.02.

show more show less

from

$152.99

Meets or exceeds OE design and performance
Magnetic size and properties compare or exceed OEM
Windings meet or exceed OEM specifications
Motor RPM equivalent to or exceeds OEM motor

from

$142.99

Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:

Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor

from

$112.65

Blower Motor Regulat

from

$356.02

BLOWER MOTOR

from

$171.99

Direct replacement – this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles.
Restores performance – fixes a fan that’s only operating on one speed or not working at all.
Thoroughly tested – examined and validated to perform safely and effectively
Trustworthy quality – backed by team of engineers and inspectors in the United States

from

$169.02

Blower Motor Regulat

Top Picks for 2016 BMW X4 Engine Cooling Parts

Upgrade BMW X4s with top-quality Engine Cooling Parts parts, including 33 OEM and aftermarket selections for your 2016 model.

show more show less

from

$26.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$146.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. This integrated thermostat housing will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant as well as the design and function of the housing. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$6.99

Sensor-safe, noncorrosive RTV silicone gasket material
Formulated specifically for water pumps and thermostat housings
Highest water-glycol resistance available in RTV silicone
Superior adhesion and flexibility
Can be used as a gasket maker or dressing

from

$481.99

This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. All necessary gaskets and seals are included.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included

from

$4.99

This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:

Ideal replacement – this engine coolant bleeder screw matches fit and function of the original equipment screw.
Durable materials – designed to withstand high cooling system temperatures and pressures.
Cost-effective solution – this bleeder screw offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$8.79

This engine coolant bleeder screw has been manufactured from durable material to prevent cooling system leaks. Matches the original screw for fit and function.

Product Features:

Upgraded material – this brass coolant air bleeder screw reduces future maintenance costs by replacing the original equipment plastic screw on specified BMW, Mini, Chrysler, Dodge, Jeep, and Ram vehicles.
Ideal solution – instead of wasting time wrestling with a deformed plastic screw head, this sturdy brass screw ensures easy, reliable removal and reuse.
Durable construction – made of quality brass for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$25.99

Maintains proper cooling system pressure
Easy installation and removal
100% tested to ensure proper pressure and longevity
Meets all OEM specifications

from

$129.92

OE quality and design
Maintenance-free, durable elements

from

$109.99

This replacement engine coolant reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is engineered and manufactured to match the fit and function of the original part.

Product Features:

Direct replacement – this engine coolant reservoir matches the fit and function of the original part.
Ideal solution – engineered for a seamless installation.
Durable construction – manufactured from quality materials to withstand underhood heat and vibration
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$129.99

High grade stainless steel and copper construction
Meets or exceeds OEM standards
Consistent and precise response to cooling system needs
Original equipment design for worry-free direct fit replacement
100% tested and calibrated

from

$25.99

Delphi temperature sensors deliver accurate readings and optimal performance
Delphi’s one-piece design and automated production process eliminates internal connectors and failure points
Each sensor is electrically insulated to eliminate interference from other components in the vehicle
Delphi temperature sensors are impervious to electrical noise and interference

from

$63.15

Oil Temperature Send

from

$854.99

Rein Automotive OE water pumps are designed to be direct replacements for OE water pumps and water pump assembles. Rein water pumps are made to original casting specifications to ensure proper fitments for easy installation, proper water flow and maximum cooling. Pumps include the necessary OE style gaskets and/or O-rings to replace the old worn out parts. Seals are made from a high quality silicate carbide compound. Bearings of OE design and materials are also used to meet or exceed OEM standards and ensure long service life. Our quality water pumps aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component. Please read and follow all enclosed instructions to maximize pump life and validate warranty.

Product Features:

OE high performance motor
Pump uses OE designed bearings by ensuring to extend pumps service life
Includes replacement seals, if applicable
Read and follow all enclosed instructions to maximize pump life and to qualify for extended warranty

from

$112.40

Thermostat Assembly

from

$72.99

Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
Resistant to cracking and wear from heat cycles preventing coolant loss
Direct fitment allows easy installation
Manufactured to strict engineering standards/specifications in materials and tolerances

from

$519.99

Precise engine temperature control through variation of coolant volume flow
Use of energy meeting the demands
Operation independent from main cooling circuit and combustion engine operation
Vehicle Specific fit and function
Made in ISO certified facilities OEM Product

from

$1029.99

Water Pump Service Kit

from

$548.99

This new pump is 100% tested to ensure the highest quality. Each unit is built to meet or exceed all OE specifications and is validated for fit, form, and function. Application specific design to ensure a perfect fit and correct operation for unsurpassed quality.

Product Features:

All components necessary for installation are supplied with pump
Follow all enclosed instructions to maximize pump life and validate warranty
Specialized for vehicles using supplemented cooling for the engine or components
Plastic housing

from

$539.99

This engine water pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Upgraded replacement – this water pump features a more robust aluminum housing, improving on the crack-prone plastic design that comes stock on certain BMW vehicles
Enhanced electronics – features an updated printed circuit board (PCB), with purposefully designed circuits, that seamlessly integrates with the factory engine control module
Rigorously tested – laboratory and on-vehicle road testing includes validation of dimensions, connector fitment, flow rates and thermal shock durability
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$465.32

Aluminum Core Radiator The Behr replacement radiator guarantees the same quality fit and performance as the OE radiator it replaces. The Behr radiator core is manufactured using high quality anti corrosive aluminum and fiber glass-reinforced polyamide coolant tanks that are highly resistant to cracking and deformation.

Product Features:

OE-Equivalent
Direct fit for easy installation.
High quality corrosion resistant materials.
OE Style mounting brackets and hose connections.
Mechanically bonded aluminum core.
Integrated transmission oil cooler when applicable.

from

$269.40

OE-Equivalent.
Direct fit for easy installation.
OE Style mounting brackets and hose connections.
Integrated transmission oil cooler when applicable.
Compact and lightweight.

from

$235.99

Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:

Thermal tested under real-life temperature simulations
High tensile strength aluminum for maximum crimp strength
Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles

from

$137.17

Air Flap Actuator

from

$121.97

TURBO COOLANT LINE

from

$94.37

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$38.99

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$35.97

The Vaico Expansion Tank Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$33.51

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$27.99

Coolant Reservoir Cap: T64, Threaded, Direct Fit, Provides Tight Seal, 1 Pack

from

$27.06

Coolant Level Sensor

from

$22.99

Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances.
Direct fit.
Meets or exceeds pressure specifications demanded by the OE manufacturer.
Produced by an original equipment supplier.

from

$5.81

Water Pump Bolt Set

from

$2.99

Plated for corrosion resistance
Made in ISO certified facilities
OEM Product
26 mm

In-Demand Heating Parts for 2016 BMW X4s

Select from 4 premium Heating Parts parts for your 2016 BMW X4, with prices ranging from $58.27 to $259.26.

show more show less

from

$58.27

ACM is a supplier of Original Equipment quality climate control products.

from

$259.26

ACM manufactures a high quality replacement Blower Motor that meets or exceeds the vehicle manufacturer’s specifications for fit, durability and quality.

Product Features:

OE-Equivalent.
Direct Fit Replacement.
High quality OE electrical components.
OE quality brushes and bearings.
Balanced rotor assembly.

from

$180.71

ACM manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Meets or exceeds OEM specifications.
Utilizes the factory style mounts, connectors and fittings.
Provides exceptional reliability.

from

$119.99

Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:

All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts

Top-Rated Cooling and Climate Controls Brands For Your 2016 BMW X4

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2016 BMW X4s. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, Dorman, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2016 X4 start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2016 BMW X4 Cooling and Climate Controls

When it comes to maintaining or upgrading your 2016 BMW X4, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2016 BMW X4. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

from
$38.99

This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

Popular Dorman 2016 BMW X4 Cooling and Climate Controls

Dorman auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2016 BMW X4 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2016 X4, Advance Auto Parts carries a full inventory of 6 Dorman Cooling and Climate Controls. Plus you will be keeping your BMW in peak condition while saving money because prices on these Dorman Cooling and Climate Controls range from $4.99 to $539.99, plus, with more than 5 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

from
$539.99

This product is not rated

Electric Engine Water Pump

“”

from
$109.99

This product is not rated

Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement

“”

from
$8.79

This product is not rated

Brass Coolant Air Bleeder Screw

“”

FAQs for 2016 BMW X4 Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2016 BMW X4s?

Out of 68 Cooling and Climate Controls that fit 2016 BMW X4s, the following parts are the top sellers:

Coolant Air Bleeder Screw (10231667) – $4.99
Engine Electric Water Pump: New, Aluminum Housing (10626270) – $481.99
Brass Coolant Air Bleeder Screw (12083347) – $8.79

What’s the price range for 2016 BMW X4 Cooling and Climate Controls?

Cooling and Climate Control prices for the 2016 BMW X4 start at $1.55 and go up to $1,115.82 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2016 BMW X4?

The average price for Cooling and Climate Controls for the 2016 BMW X4 is $162.51. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other BMW X4 model years?

Yes, we currently carry Cooling and Climate Controls for 9 model years of BMW X4s between 2015 and 2024. Cooling and Climate Controls are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2015, and 2024.

What are the cheapest Cooling and Climate Controls for my 2016 BMW X4?

The cheapest 2016 BMW X4 Cooling and Climate Controls we carry in stock are:

Air Conditioning O-Ring (10766330) – $1.55
Air Conditioning O-Ring, 13.7 mm Diameter (10766228) – $2.25
Water Pump Metal Screw Kit x3 M8x26 (11646434) – $2.99
Coolant Air Bleeder Screw (10231667) – $4.99
Water Pump Bolt Set (11583817) – $5.81

What are the top-rated Cooling and Climate Controls that fit the 2016 BMW X4?

Out of 908 reviews by customers, our 2016 BMW X4 Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2016 BMW X4 and their top-rated products:

Blower Motor and Related Products
- Blower Motor: With Wheel (10701967) – $152.99
Engine Cooling Parts
- Blower Motor: With Wheel (10701967) – $152.99
Air Conditioning Parts
- Blower Motor: With Wheel (10701967) – $152.99

What types of Cooling and Climate Controls do you sell for my 2016 BMW X4?

As of 2/5/25, these are some of the most in-demand types of Cooling and Climate Controls for a 2016 BMW X4:

Can I get help with 2016 BMW X4 Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Cooling and Climate Controls and more.

What is your return policy for BMW X4 Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new BMW X4 Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2016 BMW X4 Cooling and Climate Controls

Delphi – Engine Coolant Temperature Sensor (Part No.TS10270)

Behr – Blower Motor Regulat (Part No.R2041441822BEH)

ACM – Blower Motor Regulat (Part No.R2041441822ACM)

VDO – Water Pump Bolt Set (Part No.G3076687092VDO)

Dorman – Blower Motor Resistor (Part No.973-113)

VDO Continental – Water Pump Metal Screw Kit x3 M8x26 (Part No.A2C59507585)

ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)

VDO Continental – Electric Water Pump With An Integrated Control Unit (Part No.A2C59514607)

Rein – Expansion Tank (Part No.EPT0125)

Nissens – Radiator (Part No.G1000924182NSS)

ACM – Heater Core (Part No.R3000283445ACM)

Rein – Water Pump Service Kit (Part No.WPS0520)

Mahle – MAHLE Thermostat Assembly (Part No.G4002665747MAH)

Carquest Premium – A/C Desiccant Bag (Part No.T83086)

ACM – ACM Blower Motor (Part No.R2031388878ACM)

Original Equipment – Coolant Level Sensor (Part No.G1050335088OEA)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Rein – Cooling Hose (Part No.G2021552122RIN)

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714127)

Valeo – Air Flap Actuator (Part No.R2046700055VAL)

INA – Accessory Belt Tensioner Assembly (Part No.G6001468621INA)

Motorad – Radiator Cap: 20 PSI (Part No.T-64)

Carquest Premium – Blower Motor: With Wheel (Part No.75896)

Rein – A/C Evaporator (Part No.ACE0278R)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39275)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

ACM – A/C Evaporator Temperature Sensor (Part No.R1071273277ACM)

ATE – ABS Speed Sensor (Part No.N6030569462ATE)

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39399)

ACM – A/C Compressor (Part No.R10001069437ACM)

ACM – A/C Compressor (Part No.R1000404004ACM)

DENSO – New A/C Compressor (Part No.471-1549)

DENSO – New A/C Compressor (Part No.471-1545)

Autopart International Inc – A/C COMPRESSOR (Part No.R10003199679API)

Rein – A/C Evaporator (Part No.ACE0278R)

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714127)

Koyo Cooling – A/C Condenser (Part No.R1030407024KCS)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARA2651)

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T44033)

INA – Accessory Belt Tensioner Assembly (Part No.G6001468621INA)

Behr – A/C Expansion Valve (Part No.R1045397112BEH)

Carquest Premium – AC Pressure Sensor (Part No.ABA1128)

KAI – A/C Condenser (Part No.CND4127)

ACM – ACM A/C Expansion Valve (Part No.R1045397112ACM)

Dorman – Air Conditioning Pressure Sensor (Part No.904-611)

Original Equipment – A/C Pressure Switch (Part No.R1054668713OEA)

Carquest Premium – A/C Desiccant Cartridge Kit (Part No.T83064)

Carquest Premium – A/C Block Expansion Valve (Part No.T39588)

Carquest Premium – A/C Desiccant Bag (Part No.T83086)

ACM – Air Conditioning O-Ring, 13.7 mm Diameter (Part No.R1150274076ACM)

Rein – Air Conditioning O-Ring (Part No.R1150274107RIN)

Carquest Premium – Blower Motor: With Wheel (Part No.75896)

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1116)

ACM – Blower Motor Regulat (Part No.R2041441822ACM)

Worldpac – BLOWER MOTOR (Part No.R20314236606VAL)

Dorman – Blower Motor Resistor (Part No.973-113)

Behr – Blower Motor Regulat (Part No.R2041441822BEH)

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

Motorad – Integrated Thermostat Housing: With Sensor, 226 Degrees (Part No.822-226)

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Carquest Premium – Engine Electric Water Pump: New, Aluminum Housing (Part No.T2322)

Dorman – Coolant Air Bleeder Screw (Part No.902-404)

Dorman – Brass Coolant Air Bleeder Screw (Part No.902-404HP)

Motorad – Radiator Cap: 20 PSI (Part No.T-64)

Mahle – MAHLE Thermostat Assembly (Part No.G4002665747MAH)

Dorman – Pressurized Coolant Reservoir: Black, Plastic, Original Equipment Replacement (Part No.603-765)

Motorad – Integrated Thermostat Housing: With Sensor, 217 Degrees (Part No.947-217)

Delphi – Engine Coolant Temperature Sensor (Part No.TS10270)

Original Equipment – Oil Temperature Send (Part No.P4033412906OEA)

Rein – Electric Water Pump (Part No.WPR0049)

Autopart International Inc – Thermostat Assembly (Part No.G40022056820API)

Rein – Expansion Tank (Part No.EPT0125)

VDO Continental – Electric Water Pump With An Integrated Control Unit (Part No.A2C59514607)

Rein – Water Pump Service Kit (Part No.WPS0520)

Carquest Premium – Engine Auxiliary Water Pump (Part No.T7080)

Dorman – Electric Engine Water Pump (Part No.599-962)

Behr – Radiator (Part No.G1000458078BEH)