from

$15.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

All Rein automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. note: control arm bushing kits contain the needed pair.

from

$47.71

The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$34.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$66.46

The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$83.15

Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:

Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
Comes with bolts and washers (where applicable)
Easy to install
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$127.91

Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$122.87

Tie rod assemblies from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rod assemblies.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties
High ball stud articulation angles.

from

$97.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$86.43

The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$97.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$165.99

Not many enthusiasts are aware that OEM and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
Eliminate sway bar preload during installation and allow for on-car length adjustment of up to 25mm centre to centre.
Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.

from

$131.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$149.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$149.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$378.99

aFe Control Sway Bars are constructed out of lightweight tubular material to transform handling and inspire driving confidence. Cornering will be flatter and neutral in any corner. The 29mm rear bar is constructed from lightweight tubular steel and is 2 position adjustable through precision CNC machined, TIG welded bar ends for a perfect fit. The kit includes direct? polyurethane bushings. For years of durability and great looks, the front sway bar is powder-coated a special 2 stage tangerine orange and are a direct fit and require no modifications. aFe Control front sway bars will have your 335i handling just as good at the track as it will around town.

Product Features:

Engineered To Optimize The Factory Shock Absorber Damping
1 To 1.25 in. Of Drop
Optimized Design For Both V6 and V8 Applications
Powder coat Gloss Silver For Unbeatable Looks And Durability

from

$378.99

aFe Control Sway Bars are constructed out of lightweight tubular material to transform handling and inspire driving confidence. Cornering will be flatter and neutral in any corner. The 32mm front bar is constructed from lightweight tubular steel and is 2 position adjustable through precision CNC machined, TIG welded bar ends for a perfect fit. The kit includes direct? polyurethane bushings. For years of durability and great looks, the front sway bar is powder-coated a special 2 stage tangerine orange and are a direct fit and require no modifications. aFe Control front sway bars will have your 335i handling just as good at the track as it will around town.

Product Features:

CNC Bent Lightweight Tubular Alloy Steel Front Sway Bar
Polyurethane Bushings and Aluminum Brackets
Powder coat Finish
Direct Fit Installation

from

$681.99

aFe Control is proud to introduce the PFADT Series, ZL-Spec Sway Bars for the 2012-2014 Camaro V8 models. Designed to ZL chassis specifications, the 4130 Chromoly sway bars will transform your Camaro’s handling and inspire driving confidence. Perfectly balanced, both front and rear bars are 32mm, lightweight tubular construction and offer 3 adjustment holes allowing for fine tuning your Camaros feel to your driving style. The kit includes heavy duty sway bar brackets with grease fittings, and greaseable polyurethane bushings for added performance and a quiet ride. For years of durability and great looks, the bars are powder-coated gun metal grey and are a direct fit on 2012-2014 V8 models. Perfectly balanced, aFe Control sway bars will have your Camaro ZL spec handling just as good at the track as it will around town.

Product Features:

Direct Fit Installation
Requires No Modifications
Durable
Gun Metal Grey

from

$20.70

Steering Rack Boot Kit

from

$231.99

The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$7.23

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features: