from

$92.58

Secondary Air Inj. S

from

$182.36

Secondary Air Inj. S

from

$169.40

Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:

Improved Engine Response and Performance
Lower Emissions
Improved Fuel Economy
Longer Sensor Life
Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install

from

$136.99

Oxygen Sensor

from

$14.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$872.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$10.15

Fuel Pump Tank Seal

from

$401.26

The VDO Electric Fuel Pump meets or exceeds the OE specifications for fit, durability and performance.

Product Features:

OE-Equivalent electric fuel pump.
Direct fit for easy installation.
OE connections and fittings.
Highly efficient turbine design.
Designed for quieter operation.

from

$748.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
When servicing the fuel system, always check the fuel filter for possible replacement
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$188.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$144.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision-built for exact replacement and a first time fit. DENSO gives you the right part and the right fit the first t

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$173.36

DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$174.88

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$43.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$15.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$12.49

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$11.99

Electrical parts control all aspects of vehicles on the road today. Replacing these components when they are starting to fail will ensure your vehicle has maximum performance and fuel economy. This is why Rein Automotive electrical parts are application specific and match the design and function of the OE parts.

Product Features:

Tested to ensure maximum performance
Manufactured to strict engineering standards/specifications in materials and tolerances
Long life and durability
Made by the OE manufacturer

from

$32.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.