2016 Audi A4 Quattro Steering and Chassis Parts

Essential 2016 Audi A4 Quattro Steering and Chassis Parts

Carquest Premium – Tie Rod End (Part No.310-322072)

Tie Rod End

from

$38.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
See More

Lemfoerder – Tie Rod End (Part No.M3010525590LEM)

Tie Rod End

from

$112.53
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Rein – Sway Bar Bushing (Part No.AVB0588)

Sway Bar Bushing

from

$2.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Recommend to replace bushings in pairs to ensure best performance. note: sway bar bushing kits contain the needed pair
  • Matches original equipment design specifications
See More

Meyle – Sway Bar Bushing (Part No.L1050152203MEY)

Sway Bar Bushing

from

$3.81
The Meyle Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Delphi – Ball Joint (Part No.L2020435728DEL)

Ball Joint

from

$36.65
Delphi ball joints adhere to global OE technical requirements and undergo testing focused on strength and durability performance, safety critical tests for a safer driving experience. The ball joint push out test measures the force required to push out / remove the ball-pin from the housing. It is an important safety check to help ensure the part can withstand forces applied to the vehicle suspension system in real road conditions. The ball joint pull out test measures the force required to pull the ball-pin out from the housing. If the force required to remove the ball-pin is below the OE spec, there is a risk the joint could fail during normal driving conditions causing the vehicle to lose directional control. Additionally, Delphi’s new dust cover design features an improved Chloroprene Rubber (CR) formula that helps maintain its durability even in extreme temperatures, helping to protect the internal components and support the continued free movement of the ball joint.

Product Features:
  • One of the industry leading ranges with global application coverage.
  • Designed, engineered and manufactured to OE quality standards based on more than 100 years of experience in the design and manufacture of OE steering systems.
  • First To Market parts (for vehicles still covered by manufacturers warranty)
See More

Rare Parts – Ball Joint (Part No.RP11895)

Ball Joint

from

$86.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Delphi – Suspension Stabilizer Bar Link (Part No.L1030184687DEL)

Suspension Stabilizer Bar Link

from

$43.99
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi sway bar links are fatigue tested to avoid failure
  • Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
  • Delphi machines to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

Lemfoerder – Sway Bar Link (Part No.L1030386051LEM)

Sway Bar Link

from

$35.72
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Dorman – Suspension Control Arm (Part No.520-471)

Suspension Control Arm

from

$479.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

MOOG – Cntrl Arm w Ball Jt (Part No.RK623690)

Cntrl Arm w Ball Jt

from

$57.99
Cntrl Arm w Ball Jt

Whiteline – Radius Arm Lower Bushing (Part No.KCA422)

Radius Arm Lower Bushing

from

$90.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

Product Features:
  • Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Rare Parts – R & P Bellows (Part No.RP57384)

R & P Bellows

from

$24.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Rare Parts – R&P Bellows Kit (Part No.RP57374)

R&P Bellows Kit

from

$80.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Protects Rack & Pinion surfaces from contamination
  • Hardware included
See More

Febi – Steering Rack Boot C (Part No.M1011452369FEB)

Steering Rack Boot C

from

$3.32
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Dorman – Alignment Caster / Camber Control Arm (Part No.528-203)

Alignment Caster / Camber Control Arm

from

$456.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.

Product Features:
  • Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
  • Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
  • Durable construction – this part is made from quality materials for reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Pressure Line Hose Assembly (Part No.40443)

Pressure Line Hose Assembly

from

$83.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Rein – Power Steering Pressure Hose Assembly (Part No.PSH0254)

Power Steering Pressure Hose Assembly

from

$339.99
Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:
  • Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
  • Designed as direct-fit replacements to ensure trouble-free proper installation.
  • Complete with hardware and seals when necessary for installation to save installation time and additional costs.
  • Restores your vehicle to safe and optimal performance levels.
  • Replacing both pressure and return hoses together ensures optimal performance and safety levels.
See More

Carquest Premium – Pressure Line Hose Assembly (Part No.40285)

Pressure Line Hose Assembly

from

$142.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.

Product Features:
  • Switch sockets allow re-installation of OE pressure sensors
  • Zinc coated tubes protect against rust and corrosion
  • Banjo end lock tabs prevent hose end from loosening
  • Double lock beading with barbed tube end provides superior hose/coupling integrity
  • Heat/abrasion tubing protects vital areas
  • Restrictor helps absorb vibration and reduce noise
  • Movable mount bracket for easy, secure installation
  • Silver heat guard protects hose in high heat areas
  • Original style fittings, no adapters required
See More

Rein – Automotive Power Steering Pressure Line Hose Assembly (Part No.M2015521701RIN)

Automotive Power Steering Pressure Line Hose Assembly

from

$329.25
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:
  • Original Equipment fit, form and function
  • Manufactured from premium raw materials
  • Premium OE design
  • Right fit the first time
  • For European vehicles
See More

Whiteline – Control Arm Upper Bushing (Part No.KCA420)

Control Arm Upper Bushing

from

$100.99
Whiteline camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. This kit is supplied with dual offset Whiteline synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability which help maintain preferred alignment settings as well as providing enhanced steering response.

Product Features:
  • Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
  • Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201343)

Stabilizer Bar Bushing Kit

from

$11.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201021)

Stabilizer Bar Bushing Kit

from

$15.79
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Rein – Sway Bar Link Kit (Part No.SCL0273R)

Sway Bar Link Kit

from

$34.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K201600)

Stabilizer Bar Bushing Kit

from

$10.29
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Split design allows for easier installation
  • Replacement can reduce front end noise
  • Restores like-new steering and handling
  • Bushings are engineered to provide long life and dependability
  • Incorporates proven design and engineering features
  • Inner sleeve is phosphate coated for corrosion protection
See More

Rare Parts – Sway Bar Fr Bush (Part No.RP22660)

Sway Bar Fr Bush

from

$24.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

Delphi – Suspension Stabilizer Bar Link (Part No.L1030184686DEL)

Suspension Stabilizer Bar Link

from

$44.14
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:
  • Delphi sway bar links are fatigue tested to avoid failure
  • Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
  • Delphi machines to micron tolerances to guarantee durability and smooth joint operation
  • Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
See More

2016 Audi A4 Quattro Steering and Chassis Parts

You count on your 2016 Audi A4 Quattro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 46 Steering and Chassis Parts ranging in price from $3.32 to $587.99, you’re sure to find everything you need for your 2016 Audi A4 Quattro.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 9 different brands like Moog, Carquest Premium, and Dorman. 2016 Audi A4 Quattro Steering and Chassis Parts start as low as $3.32!

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2016 Audi A4 Quattro below to get started!

FAQs for 2016 Audi A4 Quattro Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 2016 Audi A4 Quattro?

Out of 46 Steering and Chassis Parts for the 2016 Audi A4 Quattro, the most popular in our inventory are:
Stabilizer Bar Link Kit
from $19.29
This product is not rated
Stabilizer Bar Link Kit
Sway Bar Link Kits
Tie Rod End
from $60.99
This product is not rated
Tie Rod End
Tie Rod Ends
Stabilizer Bar Link
from $34.49
This product is not rated
Stabilizer Bar Link
Sway Bar Link Kits