Name: Exhaust Gas Temperature Bung Repair Kit (OE Fix)
Brand: Dorman
SKU: 904-557
Price: 30.99 USD

from

$30.99

When an EGT sensor bung rusts, the typical solution has been to replace the entire exhaust pipe. This Dorman OE FIX kit allows direct replacement of only the failed bung, with a weld-on plate if necessary for pipe repair.

Product Features:

Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
Application specific – designed for certain Audi and Volkswagen model years
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$37.99

When an EGT sensor bung rusts, the typical solution has been to replace the entire exhaust pipe. This Dorman OE FIX kit allows direct replacement of only the failed bung, with a weld-on plate if necessary for pipe repair.

Product Features:

Cost-effective fix – this EGT sensor bung repair kit allows direct replacement of only a failed bung, rather than an entire exhaust pipe
Weld-on plate – bung comes with steel plate for repairing pipe if damaged during bung removal
Application specific – designed for a wide range of vehicle years, makes and models
This part has undergone vehicle try-on testing for conformance to product standards and quality

from

$22.99

Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.

Product Features:

Produced with high quality materials to ensure maximum life and a smooth ride.
Manufactured to strict engineering standards/specifications in materials and tolerances.
Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.

from

$14.99

Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.

Product Features:

Produced with high quality materials to ensure maximum life and a smooth ride.
Manufactured to strict engineering standards/specifications in materials and tolerances.
Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.

from

$32.99

Rein Automotive OE quality coolant hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.

from

$25.99

Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.

Product Features:

Produced with high quality materials to ensure maximum life and a smooth ride.
Manufactured to strict engineering standards/specifications in materials and tolerances.
Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.

from

$206.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation

from

$2094.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-581. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2015-2021 Volkswagen GTI, 2015-2018 Volkswagen Golf, and more, this direct-fit catalytic converter also interchanges with OE parts 5Q0 254 501 NX and 5QM 254 501 G, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$1353.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

from

$1389.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51414. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2008-2013 Volkswagen Jetta, 2008-2014 Volkswagen GTI, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 254 512 PX and 1K0 254 508 QX, among others. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$194.99

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51206 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$1984.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49165. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2006-2008 Volkswagen GTI, 2007-2009 Volkswagen Eos, and more, this direct-fit catalytic converter also interchanges with OE parts 1K0 254 511 AX and 1K0 254 506 RX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$211.99

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60105. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun” Body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun” Body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$178.99

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$206.99

Product Features:

EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

from

$307.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

from

$108.99

EGT sensors frequently seize in the exhaust bung, making replacement difficult and damaging the bung. This Dorman OE FIX solution directly replaces the sensor and comes with a bung repair kit just in case.

Product Features:

Convenient solution – this replacement EGT sensor comes with a bung repair kit in case the bung is damaged during removal
Cost-effective fix – bung repair kit allows direct repair of damaged bung instead of replacing entire exhaust pipe
Complete kit – comes with sensor, new bung, weld-on plate and zip tie
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$126.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$138.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$115.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$94.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$138.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

2016 Audi A3 Exhaust Parts

Dorman – Exhaust Gas Temperature Bung Repair Kit (OE Fix) (Part No.904-557)

Dorman – Exhaust Gas Temperature Bung Repair (OE Fix) (Part No.904-528)

Rein – Exhaust Hanger (Part No.EXH0029)

Rein – Exhaust Hanger (Part No.EXH0038)

Rein – Water Hose (Part No.EXH0042)

Rein – Exhaust Hanger (Part No.EXH0027)

Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84205)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.21-581)

Walker – CalCat CARB Direct Fit Catalytic Converter 2.375" Outlet (OD) (Part No.84296)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.51414)

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.50" (Part No.51206)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.49165)

MagnaFlow – HM Grade Universal Catalytic Converter – 2.25" (Part No.60105)

MagnaFlow – HM Grade Universal Catalytic Converter – 2.50" (Part No.99206HM)

Walker – Ultra EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93238)

Walker – CalCat CARB Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.83205)

Dorman – Exhaust Gas Temperature Sensor (Part No.904-738)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2506)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2449)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGC2448)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGC2384)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2466)

Rein – Water Hose (Part No.EXH0042)

Rein – Exhaust Hanger (Part No.EXH0029)

Rein – Exhaust Hanger (Part No.EXH0038)

Dorman – Exhaust Gas Temperature Bung Repair (OE Fix) (Part No.904-528)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2466)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2449)

Carquest Premium – Exhaust Gas Temperature (EGT) Sensor (Part No.EGA2506)

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.50" (Part No.51206)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.21-581)