2015 Subaru Impreza Steering and Chassis Parts
Find Your Specific 2015 Subaru Impreza Steering and Chassis Parts
Below you will find various in-demand Subaru Steering and Chassis Parts, components and accessories for your 2015 Impreza. Advance Auto Parts has popular Impreza parts like Power Steering Parts, Alignment Hardwares, Sway Bars and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other Impreza model years including
2013,
2014,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2015 Subaru Impreza Steering and Chassis Parts below and start saving instantly.
Popular 2015 Subaru Impreza Steering and Chassis Parts Categories
Essential Steering and Chassis Parts for 2015 Subaru Imprezas
MOOG – Steering Tie Rod End (Part No.EV801185)
from
$42.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Whiteline – Caster/Camber Offset Front Strut Mount – Kit (Part No.KCA409)
from
$173.99
Whiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements. Manufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Dorman – Alignment Camber / Toe Arm (Part No.545-247)
from
$103.99
This alignment camber and toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Carquest Premium – Lower Ball Joint: Front (Part No.410-69062)
from
$46.99
Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included for easier installation (where applicable)
Dorman – Sway Bar Kit (Part No.927-700)
from
$197.99
Product Features:
See More
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
MOOG – Suspension Ball Joint (Part No.K9513)
from
$57.99
Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- Designed to meet or exceed original equipment performance
Whiteline – Non-Adjustable Sway Bar – Front, 24mm (Part No.BSF33X)
from
$177.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 24mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Driveworks – Camber Bolt Kit (Part No.DW-K5330)
from
$24.99
Camber Bolt Kit
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201962)
from
$11.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- STRONG AND DURABLE — Engineered to match or exceed OE requirements
- RESTORES RIDE — Provides revamped steering and handling feel
- QUIET DRIVE — Replacement can reduce rear end noise
Whiteline – Positive Traction Kit – Subframe Mount Bushing (Part No.KDT907)
from
$238.99
The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.
Product Features:
See More
Product Features:
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)
from
$13.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Whiteline – Rear Sway Bar Support Brace (Part No.KBR15)
from
$72.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OE mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Heavy Duty Rear Sway Bar Mount Kit (Part No.KBR21-20)
from
$127.99
Whiteline heavy duty rear sway bar mounting saddle kits are designed to replace the original equipment mounts with a stronger more rigid forged alloy version. This Whiteline kit improves sway bar response and should be used for large diameter or adjustable sway bars especially when running the stiffer sway bar set tings as factory mounts will twist/ flex and potentially fail prematurely.
Product Features:
See More
Product Features:
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Carquest Premium – Suspension Stabilizer Bar Link (Part No.512-676535)
from
$20.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Front Left Lower Suspension Control Arm and Ball Joint Assembly (Part No.RK622787)
from
$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Engineered to match or exceed OE requirements
- ENGINEERING EXCELLENCE – With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
Dorman – Control Arm and Ball Joint Assembly – Suspension (Part No.537-163)
from
$124.99
This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Steering Knuckle (Part No.698-327)
from
$326.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Front Left Steering Knuckle (Part No.698-221)
from
$201.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles
- Reliable fit – precision-engineered to match the dimensions of original components
- Trustworthy construction – manufactured to strict standards using durable materials
- Rigorously tested – thorough quality control measures ensure longevity
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Driveworks – Camber Bolt Kit (Part No.DW-K90474)
from
$20.49
Driveworks Chassis parts are designed to meet OE specifications, help ensure improved steering response and reduce tire wear. Driveworks Chassis parts are set to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Chassis parts have been engineered and manufactured under the proven quality systems. Driveworks Chassis parts are made to provide stable and durable quality solutions and meet customer expectations.
Product Features:
See More
Product Features:
- Designed to meet OE Form, Fit, and Function.
- Performance tested to ensure durability and reduce tire wear.
- Precision engineered for improved ride and steering response.
- Hardware included for ease of installation (where applicable)
MOOG – Strut Alignment Camber Kit (Part No.K90474)
from
$35.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Whiteline – Rear Control Arm Bushing Upper – Inner Double Offset Camber (Part No.KCA326)
from
$144.99
Whiteline adjustable camber kits provide the ability to fine tune camber settings for optimum tire contact resulting in improved vehicle handling and increased tire life. The kit includes low compliance synthetic elastomer bushings which help maintain preferred alignment settings as well as providing enhanced steering response.
Product Features:
See More
Product Features:
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
MOOG – Alignment Camber Kit (Part No.K5330)
from
$49.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Upgrade your 2015 Subaru Impreza with Top-Quality Steering and Chassis Parts
When it comes to maintaining or upgrading your 2015 Subaru Impreza, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Subaru or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Impreza functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Steering and Chassis Parts for the 2015 Subaru Impreza, designed to meet your needs without breaking the bank.
From
Power Steering Part
replacements to
Alignment Hardware
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2015 Subaru Impreza at great prices.
Our Steering and Chassis Parts inventory for this model
ranges from just $13.99 to $438.99, with
an average price of $103.30.
Our 51 Steering and Chassis Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2015 Subaru Impreza without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2015 Subaru Impreza, we stock popular OEM and aftermarket Steering and Chassis Parts from top names
like Moog Driveworks, and more.
Moog Steering and Chassis Parts
start at just $39.99 and boast an impressive 4.5 stars average rating from customers.
With 1,280 customer reviews and counting, our 2015 Subaru Impreza Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2015 Subaru Impreza is always ready to roll. We’re committed to providing you with everything you need to keep your Impreza in top shape, all in one place.
Start shopping confidently below for your 2015 Subaru Impreza!
Best-Selling Power Steering Parts for 2015 Subaru Imprezas
Enhance the driving experience in your Subaru with 5 quality Power Steering Part components, starting at $13.99.
Imperial – Power Steering Oil Cooler (Part No.241009)
from
$28.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 9″
- For vehicles with 3/8″ I.D. power steering return hose
- Removes destructive heat and prolongs power steering system life
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Carquest Premium – Power Steering Filter (Part No.20-0038FCQN)
from
$91.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
- Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures
Carquest Premium – Power Steering Filter (Part No.20-0012FCQN)
from
$53.99
Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.
Product Features:
See More
Product Features:
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Carquest Premium – Power Steering Filter (Part No.991-FLT2CQN)
from
$40.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Carquest Premium – Power Steering Filter (Part No.991-FLT1CQN)
from
$13.99
Product Features:
See More
- Contains a powerful magnet which removes 99% of contaminants at filter entry point
- Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
- Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
- Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Most Popular 2015 Subaru Impreza Alignment Hardwares
Customize your Subaru with 2 Alignment Hardware products
like Alignment Caster Adjustment Spacers and
Alignment Camber Bolt Assortments, all
priced under $438.99.
MOOG – Alignment Camber Bolt Assortment (Part No.CAM1A)
from
$438.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
Whiteline – Caster/Camber Offset Front Strut Mount – Kit (Part No.KCA409)
from
$173.99
Whiteline offset strut mounts allow for adjustments of either caster or camber depending on driver requirements. Manufactured from low compliance rubber and twin shielded bearing design, this strut top allows for gains in caster or camber depending on vehicle.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Protective E-Coat coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Top Picks for 2015 Subaru Impreza Sway Bars
Upgrade Subaru Imprezas with top-quality Sway Bars parts, including 15 OEM and aftermarket selections for your 2015 model.
MOOG – Suspension Stabilizer Bar Link (Part No.K750049)
from
$39.99
Product Features:
See More
- EASY TO INSTALL – Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT – Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE – Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS – Made from premium materials for long-lasting dependability
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Sway Bar Link Kit (Part No.DW-K750049)
from
$23.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Premium Polychloroprene boot with grease relief valve keeps contaminants out
- Performance tested to ensure durability
Carquest Premium – Stabilizer Bar Link (Part No.510-96958)
from
$38.49
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
MOOG – Suspension Stabilizer Bar Link (Part No.K750486)
from
$45.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
MOOG – Suspension Stabilizer Bar Bushing Kit (Part No.K201918)
from
$15.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Whiteline – Non-Adjustable Sway Bar – Rear, 22mm (Part No.BSR51XZ)
from
$243.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 22mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
- Manufactured from high quality steel and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Non-Adjustable Sway Bar – Rear, 20mm (Part No.BSR49Z)
from
$220.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 20mm 3 point adjustable sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Take control with multi-point adjustment that allow the driver to fine tune vehicle characteristics to suit their driving preference or conditions.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- Bracing maintains alignment angles and spring rates by greatly reducing body or chassis flex.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Non-Adjustable Sway Bar – Rear, 20mm (Part No.BSR49)
from
$202.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Whiteline 20mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tire wear without affecting ride quality or comfort.
Product Features:
See More
Product Features:
- Whiteline sway bars are principally designed to reduce body roll or sway while cornering.
- Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective designs such as the internal bore knurling and grease retention lips for optimum lubrication & performance.
- DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
- Forged ends ensure maximum strength and performance of the sway bar at the sway bar link mounting point.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Heavy Duty Adjustable Sway Bar Drop Links (Part No.KLC139)
from
$123.99
Not many enthusiasts are aware that OE and more importantly aftermarket sway bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable sway bar links are engineered to be up to the task with top spec, light weight componentry combined with a window of adjustability, eliminating sway bar preload on installation but most importantly ensuring the maximum output of the sway bar for improved grip and better handling.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Manufactured from high quality alloy and include heavy duty steel ball joint ends ensuring maximum strength and durability.
- Heavy duty ball joints adjust and rotate to any angular combination for ease of fitment and optimum performance.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Articulation voids deliver necessary suspension articulation and/or compression under loads.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline – Sway Bar Link (Part No.KLC32)
from
$104.99
The kit utilises a high tensile extruded alloy link fitted with ultra low compliance synthetic elastomer bushings. Critical hardware is replaced with high tensile components to match the higher loads. The result is much more precise and direct roll control with up to 25% more effective bar rate available at lower wheel deflection points. This does NOT mean an outright increase in your bar rate but rather a quickening of its effect allowing more bar rate earlier. Link shape and bush mounts are designed to allow maximum sway bar articulation to ensure full suspension travel while acting more directly under vertical load. Standard length maintains correct sway bar operation.
Product Features:
See More
Product Features:
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Manufactured from high quality alloy and utilise the latest technology synthetic elastomer link bushings ensuring maximum strength and durability.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Rare Parts – Sway Bar Link (Part No.RP19200)
from
$99.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Rare Parts – Sway Bar Link (Part No.RP19709)
from
$92.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Whiteline – Rear Sway Bar Support Brace (Part No.KBR15)
from
$72.99
Whiteline’s rear sway bar mount support brace increases the stiffness of the rear sway bar mount and reduce the likelihood of bending or cracking of the OE mount due to the increased loads placed upon it. Recommended use with aftermarket sway bars for optimum sway bar performance.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Lemfoerder – Sway Bar Link (Part No.L1030403162LEM)
from
$38.56
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Carquest Premium – Stabilizer Bar Link (Part No.540-288876)
from
$24.99
Carquest Premium sway bar links are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium sway bar links, or also known as stabilizer bar links, utilizing the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all steel sway bar links to reduce rust. Each part number in the Carquest Premium sway bar link line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating on steel links to reduce rust and extend service life
- Hex formed studs for easier installation (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
In-Demand Ball Joints for 2015 Subaru Imprezas
Select from 14 premium Ball Joints parts for your 2015 Subaru Impreza, with prices ranging from $29.99 to $197.99.
MOOG – Suspension Ball Joint (Part No.K9513)
from
$57.99
Backed by superior materials and rigorous testing, MOOG ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- Designed to meet or exceed original equipment performance
Driveworks – Ball Joint (Part No.DW-K9513)
from
$29.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing provides exceptional strength and durability
- Oxidation film on the surface of the metal protects against corrosion
- Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
Carquest Premium – Lower Ball Joint: Front (Part No.410-69062)
from
$46.99
Carquest Premium ball joints are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium ball joints utilize the same ball joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on all ball joints to reduce rust. Each part number in the Carquest Premium ball joint line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life
- Ball joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Sealed designs feature a fully polished ball stud combined with synthetic bearing technology for smooth operation, improved reliability and no maintenance
- Tested in accordance SAE Spec J193 which ensures ball joint assemblies meet all functional requirements of the application
- Hardware included for easier installation (where applicable)
MOOG – Suspension Control Arm & Ball Joint Assembly (Part No.RK100124)
from
$131.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.524-790)
from
$137.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.524-789)
from
$137.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Suspension Control Arm (Part No.524-770)
from
$197.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Rare Parts – Ball Joint (Part No.RP10598)
from
$34.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Dorman – Suspension Control Arm (Part No.524-769)
from
$195.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Rear Left Upper Suspension Control Arm and Ball Joint Assembly (Part No.RK623498)
from
$182.99
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY – Preinstalled ball joints with sealed sockets for maintenance-free operation
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
MOOG – Rear Right Upper Suspension Control Arm and Ball Joint Assembly (Part No.RK623497)
from
$182.99
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- INSTALLATION READY – Preinstalled ball joints with sealed sockets for maintenance-free operation
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
MOOG – Suspension Control Arm And Ball Joint Assembly (Part No.RK623847)
from
$119.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
MOOG – Suspension Control Arm And Ball Joint Assembly (Part No.RK623848)
from
$119.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- KEEPS DIRT AND WATER OUT – Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminants
- ADDED CORROSION PROTECTIONá- Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grime
- PREMIUM BUSHINGS – Pre-installed with optimized stiffness to inhibit noise for a comfortable ride
- HARDWARE INCLUDED – Comes with all necessary hardware for easy, fast installation
- ENHANCED STRUCTURAL STRENGTH – Material and heat treatment are carefully selected to meet application requirements
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
Whiteline – Boot Service Kit to Suit Whiteline KCA313 (Part No.W0907)
from
$39.99
A must for lowered vehicles, Whiteline roll centre and camber adjusting correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints, whilst at the same time allowing fine tunning of camber settings with up to ? a degree of negative camber gain, perfect for track days and spirited driving! Raising the front roll-centre (along with negative camber) results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tire during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip, cornering speeds and tire life when driving the vehicle to it’s potential.
Product Features:
See More
Product Features:
- Kit Contains: 4 Boots
Most Sold 2015 Subaru Impreza Tie Rods
Explore our best-selling Subaru parts for the 2015 Impreza among 4 OEM and aftermarket options starting from $25.99.
MOOG – Steering Tie Rod End (Part No.ES3712)
from
$67.99
Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING – Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET – Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT – Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER GUSHER BEARING – Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE – Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – TIE ROD END 1 EA DRIVE (Part No.DW-ES3712)
from
$25.99
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
See More
Product Features:
- Forged housing from specific materials provides strength and durability to prevent breakage
- Coated technology provides a smooth and durable surface to prevent corrosion and rust
- Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
- A slotted nut and cotter pin for a more secure installation
Carquest Premium – Tie Rod End (Part No.310-73935)
from
$31.99
Product Features:
See More
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs & wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
MOOG – Steering Tie Rod End (Part No.EV801185)
from
$42.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Powdered metal gusher bearing design enables grease to flow through bearing to stud for reduced friction and enhanced strength
Top-Rated Steering and Chassis Parts Brands For Your 2015 Subaru Impreza
Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2015 Subaru Imprezas. Below you’ll find some of our best rated Steering and Chassis Parts from Moog and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 2015 Impreza start at just $23.99 and are rated as high as 4.5 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Moog 2015 Subaru Impreza Steering and Chassis Parts
When it comes to maintaining or upgrading your 2015 Subaru Impreza, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Moog ticks all of those boxes. We offer a wide selection of Moog Steering and Chassis Parts, specifically designed for the 2015 Subaru Impreza. With over 3 Moog brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $39.99, with an average price of just $55.32. Plus, with over 79 customer reviews and an average rating of 4.5 stars, you can trust that our Moog Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$39.99
(32)
Suspension Stabilizer Bar Link
“Great product and quality. Super easy installation.”
from
$57.99
(38)
Suspension Ball Joint
“These were a good fit on an 01 Neon. Came with new pinch bolt, nut, zero and snap ring.”
Popular Driveworks 2015 Subaru Impreza Steering and Chassis Parts
Driveworks auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2015 Subaru Impreza owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2015 Impreza, Advance Auto Parts carries a full inventory of 2 Driveworks Steering and Chassis Parts. Plus you will be keeping your Subaru in peak condition while saving money because prices on these Driveworks Steering and Chassis Parts range from $23.99 to $25.99, plus, with more than 31 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.
from
$23.99
(23)
Sway Bar Link Kit
“They are pretty hefty more so the the factory ones. They are real easy to install, not this bolt where you have to insert an allen wrench nonsense. Wo”
FAQs for 2015 Subaru Impreza Steering and Chassis Parts
Which Steering and Chassis Parts are best-sellers for 2015 Subaru Imprezas?
Out of 51 Steering and Chassis Parts that fit 2015 Subaru Imprezas, the following parts are the top sellers:
- Sway Bar Link Kit (10462834) – $23.99
- Power Steering Oil Cooler (19230069) – $28.49
- Ball Joint (15510469) – $29.99
What’s the price range for 2015 Subaru Impreza Steering and Chassis Parts?
Steering and Chassis Part prices for the 2015 Subaru Impreza start at $13.99 and go up to $438.99 for the most premium parts.
What’s the average price of a Steering and Chassis Part for a 2015 Subaru Impreza?
The average price for Steering and Chassis Parts for the 2015 Subaru Impreza is $103.30. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Steering and Chassis Parts for other Subaru Impreza model years?
What are the cheapest Steering and Chassis Parts for my 2015 Subaru Impreza?
The cheapest 2015 Subaru Impreza Steering and Chassis Parts we carry in stock are:
- Power Steering Filter (50308546) – $13.99
- Suspension Stabilizer Bar Bushing Kit (12177749) – $15.29
- Camber Bolt Kit (10361721) – $20.49
- Sway Bar Link Kit (10462834) – $23.99
- Camber Bolt Kit (11049756) – $24.99
What are the top-rated Steering and Chassis Parts that fit the 2015 Subaru Impreza?
Out of 1,280 reviews by customers, our 2015 Subaru Impreza Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2015 Subaru Impreza and their top-rated products:
- Tie Rods
- Steering Tie Rod End (20515601) – $67.99
- TIE ROD END 1 EA DRIVE (10195663) – $25.99
What types of Steering and Chassis Parts do you sell for my 2015 Subaru Impreza?
As of 3/1/26, these are some of the most in-demand types of Steering and Chassis Parts for a 2015 Subaru Impreza:
Can I get help with 2015 Subaru Impreza Steering and Chassis Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Subaru Steering and Chassis Parts and more.
What is your return policy for Subaru Impreza Steering and Chassis Parts?
Advance Auto Parts keeps returns simple. For new Subaru Impreza Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
