2015 Scion FR-S Cooling and Climate Controls

Essential Cooling and Climate Controls for 2015 Scion FR-Ss

KAI – A/C Condenser (Part No.CND4145)

A/C Condenser

from

$67.99
New Platinum Pro A/C Condenser, 2.0 Liter H4 Engines

Product Features:
  • 2.0 Liter H4 Engines, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1121)

Ambient Air Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Radiator (Part No.RAD13347)

Radiator

from

$107.99
New Platinum Pro Radiator, 2.0 Liter H4 Engine

Product Features:
  • 2.0 Liter H4 Engine, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1315)

Coolant Temperature Sensor

from

$13.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – Multi-Purpose O-Ring (Part No.36024)

Multi-Purpose O-Ring

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorad – Standard Thermostat: With Seal, 189 Degrees (Part No.762-189)

Standard Thermostat: With Seal, 189 Degrees

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

DENSO – Blower Motor Resisto (Part No.R2032444237ND)

Blower Motor Resisto

from

$34.50
Blower Motor Resisto

Felpro – Multi-Purpose O-Ring (Part No.36132)

Multi-Purpose O-Ring

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)

Radiator Cap: 16 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714145)

A/C Condenser and Receiver Drier Assembly

from

$229.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – A/C Block Expansion Valve (Part No.T39560)

A/C Block Expansion Valve

from

$15.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.41-73300-00)

Engine Coolant Thermostat Housing Gasket

from

$5.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Dorman – Engine Coolant Thermostat Housing (Part No.902-5856)

Engine Coolant Thermostat Housing

from

$36.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

A/C Desiccant Bag Kit

from

$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Radiator Cap Tester Adapter

from

$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Carquest Premium – Blower Motor: With Wheel (Part No.76934)

Blower Motor: With Wheel

from

$79.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Autopart International Inc – Blower Motor (Part No.R20312074107API)

Blower Motor

from

$123.54
Blower Motor

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1429)

HVAC Blower Motor Resistor

from

$42.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1849)

HVAC Blower Motor Resistor

from

$117.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1282)

Engine Water Pump: New, Gasket/Seals Included

from

$212.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

AISIN – OE Replacement Water Pump (Part No.G3000400042ASC)

OE Replacement Water Pump

from

$181.71
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Stant – THERMOSTAT SEAL (Part No.27286)

THERMOSTAT SEAL

from

$1.49
THERMOSTAT SEAL

Felpro – O-RING (Part No.35524)

O-RING

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Upgrade your 2015 Scion FR-S with Top-Quality Cooling and Climate Controls

When it comes to maintaining or upgrading your 2015 Scion FR-S, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Scion or enhancing its overall performance, Cooling and Climate Controls are key to keeping your FR-S functioning at its best. At Advance Auto Parts, we offer a wide selection of 38 Cooling and Climate Controls for the 2015 Scion FR-S, designed to meet your needs without breaking the bank. From Blower Motor and Related Product replacements to HVAC Electrical Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Cooling and Climate Controls for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Cooling and Climate Controls for your 2015 Scion FR-S at great prices. Our Cooling and Climate Controls inventory for this model ranges from just $1.49 to $229.99, with an average price of $58.41. Our 38 Cooling and Climate Controls in stock come from 16 trusted brands, so you’re sure to find the right part for your 2015 Scion FR-S without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2015 Scion FR-S, we stock popular OEM and aftermarket Cooling and Climate Controls from top names like Permatex, FELPRO, Carquest Premium, and more. Permatex Cooling and Climate Controls start at just $6.99 and boast an impressive 5 stars average rating from customers. FELPRO and Carquest Premium also bring quality to the table, with Cooling and Climate Controls available starting at $4.49, and at an average 5 stars rating. With 451 customer reviews and counting, our 2015 Scion FR-S Cooling and Climate Controls have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Cooling and Climate Control upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2015 Scion FR-S is always ready to roll. We’re committed to providing you with everything you need to keep your FR-S in top shape, all in one place. Start shopping confidently below for your 2015 Scion FR-S!

Best-Selling Blower Motor and Related Products for 2015 Scion FR-Ss

Enhance the driving experience in your Scion with 5 quality Blower Motor and Related Product components, starting at $34.50.

Carquest Premium – Blower Motor: With Wheel (Part No.76934)

Blower Motor: With Wheel

from

$79.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Autopart International Inc – Blower Motor (Part No.R20312074107API)

Blower Motor

from

$123.54
Blower Motor

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1849)

HVAC Blower Motor Resistor

from

$117.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

DENSO – HVAC Blower Control (Part No.R2005811881ND)

HVAC Blower Control

from

$72.83
HVAC Blower Control

DENSO – Blower Motor Resisto (Part No.R2032444237ND)

Blower Motor Resisto

from

$34.50
Blower Motor Resisto

Most Popular 2015 Scion FR-S HVAC Electrical Parts

Customize your Scion with 1 HVAC Electrical Parts products like Cabin Air Temperature Sensors, all priced under $43.99.

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1121)

Ambient Air Temperature Sensor

from

$43.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Top Picks for 2015 Scion FR-S Engine Cooling Parts

Upgrade Scion FR-Ss with top-quality Engine Cooling Parts parts, including 27 OEM and aftermarket selections for your 2015 model.

Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

from

$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Motorad – Standard Thermostat: With Seal, 189 Degrees (Part No.762-192)

Standard Thermostat: With Seal, 189 Degrees

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Sankei Switches – Sankei Switches Radiator Cap (Part No.G101045813SAK)

Sankei Switches Radiator Cap

from

$11.27
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.

Product Features:
  • Meets Original Equipment specifications.
  • Made from premium materials.
  • Designed to function on open cooling systems and overflow reservoir type systems.
See More

Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

from

$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.

Product Features:
  • Sensor-safe, noncorrosive RTV silicone gasket material
  • Formulated specifically for water pumps and thermostat housings
  • Highest water-glycol resistance available in RTV silicone
  • Superior adhesion and flexibility
  • Can be used as a gasket maker or dressing
See More

Felpro – O-RING (Part No.35524)

O-RING

from

$7.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)

Radiator Cap: 16 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Radiator Cap Tester Adapter

from

$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Felpro – Multi-Purpose O-Ring (Part No.36024)

Multi-Purpose O-Ring

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Motorad – Standard Thermostat: With Seal, 189 Degrees (Part No.762-189)

Standard Thermostat: With Seal, 189 Degrees

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

NPW – Water Pump (Part No.G3000400042NPW)

Water Pump

from

$67.95
Water Pump

Motorad – Standard Thermostat: With Seal, 194 Degrees (Part No.762-194)

Standard Thermostat: With Seal, 194 Degrees

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Felpro – Multi-Purpose O-Ring (Part No.36132)

Multi-Purpose O-Ring

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

AISIN – OE Replacement Water Pump (Part No.G3000400042ASC)

OE Replacement Water Pump

from

$181.71
The AISIN Water Pump contains no remanufactured parts and provides optimal cooling without creating excess load to the engine. The highest quality materials are used, creating stronger body design and resistance to corrosion.

Product Features:
  • OE-Equivalent and direct fit application.
  • 100% new with no remanufactured parts.
  • Advanced technological design.
  • Carbon ceramic sealing.
  • Resistant to corrosion.
  • Optimum cooling performance and longevity.
See More

Carquest Premium – Radiator (Part No.813346)

Radiator

from

$179.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineeredáwith integrated ribbingáfor addedástrength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
See More

Koyo Cooling – Koyo Cooling Radiator (Part No.G1000435936KCS)

Koyo Cooling Radiator

from

$169.41
Plastic Tank / Aluminum Core Radiator Koyo radiators are available in plastic tank and aluminum core. The Nocolok brazing line keeps the highest quality standards, bringing you superior products you can rely on. The Koyo Cooling radiator has been engineered to the highest standards and incorporates application specific mounting locations for all fan shrouds, inlet-outlet hoses and top-bottom mounting pins, ensuring quick and pain-free installs.

Product Features:
  • All Aluminum Core and Plastic Tank
  • OE Style mounting brackets and hose connections
  • Integrated transmission oil cooler when applicable
  • Compact and lightweight
See More

KAI – Radiator (Part No.RAD13347)

Radiator

from

$107.99
New Platinum Pro Radiator, 2.0 Liter H4 Engine

Product Features:
  • 2.0 Liter H4 Engine, Made Of Plastic and Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1315)

Coolant Temperature Sensor

from

$13.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Felpro – Engine Water Pump Gasket (Part No.36042)

Engine Water Pump Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1282)

Engine Water Pump: New, Gasket/Seals Included

from

$212.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Dorman – Engine Coolant Thermostat Housing (Part No.902-5856)

Engine Coolant Thermostat Housing

from

$36.49
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models.
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Worldpac – THERMOSTAT (Part No.G40004103484NTC)

THERMOSTAT

from

$32.05
THERMOSTAT

NTC – Thermostat (Part No.G40003120218NTC)

Thermostat

from

$26.84
Thermostat

Autopart International Inc – Thermostat (Part No.G40001972617API)

Thermostat

from

$17.46
Thermostat

Victor Reinz – Engine Coolant Thermostat Housing Gasket (Part No.41-73300-00)

Engine Coolant Thermostat Housing Gasket

from

$5.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Stant – THERMOSTAT SEAL (Part No.27286)

THERMOSTAT SEAL

from

$1.49
THERMOSTAT SEAL

In-Demand Air Conditioning Parts for 2015 Scion FR-Ss

Select from 5 premium Air Conditioning Parts parts for your 2015 Scion FR-S, with prices ranging from $15.99 to $229.99.

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83029)

A/C Desiccant Bag Kit

from

$38.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

KAI – A/C Condenser (Part No.CND4145)

A/C Condenser

from

$67.99
New Platinum Pro A/C Condenser, 2.0 Liter H4 Engines

Product Features:
  • 2.0 Liter H4 Engines, Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714145)

A/C Condenser and Receiver Drier Assembly

from

$229.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
See More

Carquest Premium – A/C Block Expansion Valve (Part No.T39560)

A/C Block Expansion Valve

from

$15.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

Top-Rated Cooling and Climate Controls Brands For Your 2015 Scion FR-S

Shop for the best-rated brands offering Cooling and Climate Controls and other products for your 2015 Scion FR-Ss. Below you’ll find some of our best rated Cooling and Climate Controls from Permatex, FELPRO, and Carquest Premium, and more. Cooling and Climate Controls from these brands that fit a 2015 FR-S start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Cooling and Climate Controls don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2015 Scion FR-S Cooling and Climate Controls

When it comes to maintaining or upgrading your 2015 Scion FR-S, using quality Cooling and Climate Controls is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Cooling and Climate Controls, specifically designed for the 2015 Scion FR-S. With over 3 Permatex brand Cooling and Climate Controls in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $24.32. Plus, with over 295 customer reviews and an average rating of 5 stars, you can trust that our Permatex Cooling and Climate Controls will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from
$6.99

(288)

Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ

“Goood product”

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ
from
$38.99
This product is not rated

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

“”

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
from
$26.99

(7)

High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ

“it worked great,thank you marv and your crew.”

Popular FELPRO 2015 Scion FR-S Cooling and Climate Controls

FELPRO auto parts is one of the highest quality Cooling and Climate Control brands in the market. Any 2015 Scion FR-S owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2015 FR-S, Advance Auto Parts carries a full inventory of 4 FELPRO Cooling and Climate Controls. Plus you will be keeping your Scion in peak condition while saving money because prices on these FELPRO Cooling and Climate Controls range from $4.49 to $7.99, plus, with more than 7 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Cooling and Climate Controls below will deliver on both quality and value.

Multi-Purpose O-Ring
from
$7.99
This product is not rated

Multi-Purpose O-Ring

“”

Engine Water Pump Gasket
from
$6.79
This product is not rated

Engine Water Pump Gasket

“”

Multi-Purpose O-Ring
from
$4.49
This product is not rated

Multi-Purpose O-Ring

“”

FAQs for 2015 Scion FR-S Cooling and Climate Controls

Which Cooling and Climate Controls are best-sellers for 2015 Scion FR-Ss?

Out of 38 Cooling and Climate Controls that fit 2015 Scion FR-Ss, the following parts are the top sellers:

What’s the price range for 2015 Scion FR-S Cooling and Climate Controls?

Cooling and Climate Control prices for the 2015 Scion FR-S start at $1.49 and go up to $229.99 for the most premium parts.

What’s the average price of a Cooling and Climate Control for a 2015 Scion FR-S?

The average price for Cooling and Climate Controls for the 2015 Scion FR-S is $58.41. Keep in mind the variety of part types within our Cooling and Climate Control category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Cooling and Climate Controls for other Scion FR-S model years?

Yes, we currently carry Cooling and Climate Controls for 3 model years of Scion FR-Ss between 2013 and 2016. Cooling and Climate Controls are bought most frequently for the following model years: 2016, 2014, and 2013.

What are the cheapest Cooling and Climate Controls for my 2015 Scion FR-S?

The cheapest 2015 Scion FR-S Cooling and Climate Controls we carry in stock are:

What are the top-rated Cooling and Climate Controls that fit the 2015 Scion FR-S?

Out of 451 reviews by customers, our 2015 Scion FR-S Cooling and Climate Controls have an average customer rating of . These are some of the highest-rated Cooling and Climate Control types for the 2015 Scion FR-S and their top-rated products:

What types of Cooling and Climate Controls do you sell for my 2015 Scion FR-S?

Can I get help with 2015 Scion FR-S Cooling and Climate Control orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Scion Cooling and Climate Controls and more.

What is your return policy for Scion FR-S Cooling and Climate Controls?

Advance Auto Parts keeps returns simple. For new Scion FR-S Cooling and Climate Controls and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.