2015 Ram 2500 Exhaust System Kits

5.7L HEMI engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

Product Features:

• Direct replacement – the components in this kit are designed to match the function of the original equipment exhaust manifold gaskets and mounting hardware on specified vehicles
• Time-saver – hassle-free alternative to searching for quality replacements for original equipment components that have failed from heat cycling or corrosion
• Application-specific – precision manufactured to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains application-specific studs, bolts and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs, bolts and nuts required to install one exhaust manifold.

Product Features:

• Upgraded hardware – this set of M8-1.25 x 40mm exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance.
• Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
• Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Designed and manufactured to meet the needs of the exhaust system repair environment.
• Verified, tested and certified proprietary Organic coating resists corrosion.
• Tightly controlled coefficient of friction ensures reliable installation.
• Application specific kit contents
• Self-locking nuts (where applicable).

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:

• Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
• Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

aFe POWER introduces an all new Rebel Series dual middle-side exit exhaust system for the 2014-2017 RAM 2500/3500 with V8-6.4L HEMI engine. This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe POWER logos on the side and are constructed from 304 stainless steel for durability. The exhaust system is constructed from 3-1/2″ MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. This kit uses a free-flowing muffler to absorb high pitch tones producing a powerful sound. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 4″ Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 4″ diameter black 304 stainless steel clamp-on tips with a laser-etched aFe POWER logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Stainless Steel Muffler
• Very Aggressive Sound
• Bayonet Style Hangers For Secure Fit

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19200 brings out the personality of your 6.4L 2014-2023 Ram with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 4in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 5in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Ram exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ram’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19200 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19200 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

Interested in a new exhaust system. Check out the ATLAS DPF-Back Exhaust system form aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. Uses all factory mounting locations to provide a quick, hassle-free installation. Includes a massive 6 in. polished 304 stainless tip with a laser-cut stainless steel aFe power badge. Tip features a drain port on the bottom to keep rust and corrosion away. High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 6 in. Polished Tip w/Laser-Cut aFe Badge
• OE-Style Flange
• High Quality Band Clamps

The Large Bore HD Performance DPF-Back exhaust features 4″ 409 stainless steel tubing with smooth curves and increased size to help remove restriction and keeps exhaust gasses flowing smoothly. The OE style band-clamps and bayonet style hangers make sure this system installs cleanly and easily.

Product Features:

• Aggressive Sound
• Street Legal
• Includes High Quality Band Clamps
• Direct Bolt On

aFe is proud to introduce the MACH Force-Xp Cat-Back exhaust system. This exhaust system outflows the factory exhaust. This cat-back exhaust is constructed of 4″ mandrel-bent 409 stainless steel tubing and comes complete with free-flowing muffler, OE-style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. The system is finished off with single gloss black 304 stainless steel, double wall slash cut tips for an aggressive style. Installation is a Snap: This MACH Force-Xp exhaust system use all factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• Free Flowing Muffler
• Smooth Curves
• Hassle Free Installation

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• Increased Flow And Performance
• High Quality Band Clamps
• Bayonet OE Style/Welded-On Hangers

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.

Product Features:

• 5 in. Aluminized Steel Tubing
• 7 in. Wrinkle Black Powder Coated Tip w/Laser Cut Age Badge
• OE Style Flanges
• High Quality Band Clamps

The Borla (R) Cat-Back (TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back (TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

The MagnaFlow D-Fit Performance Exhaust Muffler Replacement Kit With Muffler 19493 offers enthusiasts an easy way to upgrade their 2014-2023 Ram 6.4L with the deep signature sound and dyno-proven performance that MagnaFlow exhaust systems are famous for. This easy-to-install solution is designed to connect (where applicable) to the stock break points of your 6.4L truck and replaces the restrictive factory muffler with a MagnaFlow straight-through muffler while retaining the OEM piping and tailpipe. 19493?is engineered to produce Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 3.5in. main piping. This exhaust system is produced using CNC precision robotic manufacturing and features durable 100% stainless steel construction, all backed by a limited lifetime construction warranty.

Product Features:

• 409 Stainless Steel Construction
• Mandrel Bent Stainless Steel Tubing
• Maintains the OEM piping and tailpipe