2015 Mitsubishi Lancer Performance and Racing Products

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

The AEM 21-778C Performance Cold Air Intake System produces horsepower And torque gains by replacing your vehicle’s restrictive factory air filter And air intake housing. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration And performance. The air filter is relocated to be in driver-side wheel well which is designed to reduce intake air temperature And increase horsepower. The lower air intake tube is a free-flowing, mandrel-bent aluminum tube with a durable gunmetal gray powder coat finish. The upper air intake tube is a roto-molded, aerodynamically engineered, HDPE tube that insulates the cooler intake air from heat as it passes through the engine bay And into the engine’s throttle body. This air intake system was developed to accommodate the Lancer’s factory emissions control devices including the mass airflow sensor And PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the 21-778C vehicle applications to determine the legal status for each vehicle.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

The K&N 69-6540TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Lancer models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-6540TB air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that’s made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:

• Guaranteed to increase horsepower
• Designed to improve throttle response and engine sound
• Free-flowing aluminum tube
• Easy to install, usually in 90 minutes or less
• Lasts up to 100,000 miles before service is required (depending on driving conditions)
• Replaces entire factory air intake system
• Washable and reusable lifetime air filter
• K&N Million Mile Limited Warranty

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

The K&N 69-6540TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Lancer models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smooths and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-6540TP air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that’s made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:

• GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
• IMPROVED ENGINE SOUND: Hear the power under the hood.
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
• DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
• HIGH QUALITY: Made in America.