2015 Jeep Wrangler Performance and Racing Products
Find Your Specific 2015 Jeep Wrangler Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 2015 Wrangler. Advance Auto Parts has popular Wrangler parts like Performance Exhaust Products, Performance Air Intake Kits, Performance Suspension Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Wrangler model years including
2014,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2015 Jeep Wrangler Performance and Racing Products below and start saving instantly.
Popular 2015 Jeep Wrangler Performance and Racing Products Categories
Essential Performance and Racing Products for 2015 Jeep Wranglers
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Center Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942447)
from
$137.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
K&N – Cold Air Intake: Adds Up To 13 Horsepower, With Washable Air Filter (Part No.57-1521)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Energy Suspension – Body Mount Set (Part No.2.4107R)
from
$142.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – BodyMntBshKt (Part No.2.4109R)
from
$388.99
BodyMntBshKt
K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.57-1553)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12092-1)
from
$376.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- 360 deg. Radial Flow Air Filter
- Pre-Oiled Media
- 5.5 in. 360 deg. Air Filter
- Dyno Tested Intake Tube
Rancho – Steering Damper RS5000 (Part No.RS5418)
from
$93.99
Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on-road and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST – Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES – Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2364)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Dynomax – Exhaust Intermediate Pipe (Part No.53840)
from
$38.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Dynomax – Exhaust Pipe (Part No.55387)
from
$99.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Energy Suspension – SwyBarBshKt (Part No.2.5113R)
from
$41.49
SwyBarBshKt
Energy Suspension – SwyBarBshKt (Part No.2.5112R)
from
$40.99
SwyBarBshKt
Energy Suspension – MasterBshKt (Part No.2.18108R)
from
$859.99
MasterBshKt
Energy Suspension – Hyper-Flex System (Part No.2.18107R)
from
$594.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101R)
from
$41.49
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101G)
from
$41.49
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
SCT Performance – X4 Performance Programmer (Part No.7215)
from
$399.99
The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.
Product Features:
See More
Product Features:
- Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease.
- Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
- Full color LCD display
- High-speed data logging/monitoring
- Dual analog inputs
- Most popular vehicles supported
- Installs quickly and easily
- Easy restoration back to stock
- User adjustable vehicle parameters
- USB Interface cable included
- Product might not be available in all states due to local laws.
Hypertech – REACT Off-Road Throttle Optimizer: Better power delivery for off-road driving on various terrains (Part No.105202)
from
$328.99
The REACT offers fully customizable control over your vehicle’s throttle response. The simple control knob allows you to switch between multiple modes and control the throttle intensity of each mode on-the-fly. The REACT installs easily and is completely plug-and-play, has an automatic setup sequence so no disassembly is required, comes with a magnetic A/C vent mount (Pedestal swivel mount also available – Sold separately at hypertech.com/REACT.aspx), and doesn’t void your factory warranty. Plus the REACT is internet updateable. Three (3) versions of the REACT throttle optimizer are available to fit your particular driving needs… Performance, Off-Road, and Tow.
Product Features:
See More
Product Features:
- On-The-Fly Adjustments
- LED Setting Indicators
- Multiple Levels Of Safety Protection
- Magnetic A/C Vent Mount Incl. [No Screw Or Tape]
- Pedestal Swivel Mount Available [Sold Separately]
- Custom Tuning Software
- Internet Updateable
- Easy Plug-N-Play Install
- Automatic Setup Sequence [No Disassembly Required]
- Doesnt Void Factory Warranty
Energy Suspension – CntrlArmBshngKt (Part No.2.3108R)
from
$135.99
CntrlArmBshngKt
Energy Suspension – Control Arm Bushing Set (Part No.2.3106G)
from
$127.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Rancho – RockGEAR Differential Cover (Part No.RS6209)
from
$222.99
Product Features:
See More
- COMPATIBILITY: Fits Jeep Wrangler TJ and JK, Dana 44
- BUILT FOR THE TRAIL: Protects differential cover from rocks and other obstacles while off-roading, rock crawling and trail riding
- ADDED PROTECTION: Mounts to Dana 44 differential for added axle and internal gear protection
- EXTRA STRENGTH: Ribbed external construction for added strength
- RESISTS CORROSION: Durable red powder-coat finish resists rust and corrosion
- ENGINEERED TO LAST: High-strength ductile iron steel construction for added axle and internal gear protection
- ACCESS FOR FILLING: Off-set, oversized fill plug for increased fluid capacity and easier/quicker filling
- BUY WITH CONFIDENCE: Comes with Rancho’s limited warranty
Rugged Ridge – Skid Plate (Part No.DMC-16597.44)
from
$205.99
Protect your factory differential cover with These heavy-duty skid plates. Designed to fit the contours of your stock differential cover. Constructed of durable 3/16 in. black powder coated steel, these skid plates will help you slide over obstacles and not get hung up. Includes replacement mounting hardware and instructions. Will not fit Aluminum Housing D44A.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/Factory Diff Cover
- Mounting Hardware Included
- Jeep Logo
Rugged Ridge – Heavy Duty Differential Skid Plate (Part No.16597.35)
from
$114.99
Protect your factory differential cover with these heavy duty skid plates. Designed to fit the contours of your stock differential cover and made of durable 3/16-inch black powdercoated steel, these skid plates will help you slide over obstacles.
Product Features:
See More
Product Features:
- Black Powder Coated
- 3/16 in. Steel
- Use w/ Factory Diff Cover
- Mounting Hardware Included
Flowmaster Inc. – Cat-back System 409S – Single Rear Exit – Force II – Mild Sound (Part No.817491)
from
$735.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. As a Force II system it produces a mild interior and exterior tone, and is suited to customers looking for efficiency improvements without too aggressive of a tone. Especially recommended daily drivers. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More
Flowmaster Inc. – Cat-back System – Single Rear Exit – Force II – Mild Sound (Part No.17272)
from
$562.99
For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.R. (Single out rear) systems are the perfect choice. Force II systems delivers a mild exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Especially recommended for towing applications. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
See More
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15853)
from
$754.99
The MagnaFlow 1991-1995 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.5L, 4.0L 1991-1995 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15853 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15853 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.15855)
from
$845.99
The MagnaFlow 2000-2006 Jeep Wrangler Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.4L, 2.5L, 4.0L 2000-2006 Jeep Wrangler with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 2.75in. Polished Welded-On Single Wall Turndown Cut Edge tips, this Jeep Wrangler exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Jeep Wrangler’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15855 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15855 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.
Product Features:
See More
Product Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
Dynomax – Dual – 2.5in Axle-Back Exhaust System – Super Turbo Muffler: Stainless Steel (Part No.39510)
from
$282.99
Give your Jeep Wrangler JK a dual exit exhaust system with a DynoMax Super Turbo dual 2.5-in. axle-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY : Designed for Jeep Wrangler JK; see product information for compatibility and engine specifications
- PERFORMANCE UPGRADE : Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement
- COMPLETE SOLUTION : Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps
- EASY TO INSTALL : Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY : Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN : Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
- PREMIUM PERFORMANCE : Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST: Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- SPECS : 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tips
Upgrade your 2015 Jeep Wrangler with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2015 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Performance and Racing Products for the 2015 Jeep Wrangler, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Air Intake Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2015 Jeep Wrangler at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $38.99 to $859.99, with
an average price of $290.86.
Our 31 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2015 Jeep Wrangler without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2015 Jeep Wrangler, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, and more.
K&N Performance and Racing Products
start at just $68.99 and boast an impressive 4.8 stars average rating from customers.
With 252 customer reviews and counting, our 2015 Jeep Wrangler Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2015 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place.
Start shopping confidently below for your 2015 Jeep Wrangler!
Best-Selling Performance Exhaust Products for 2015 Jeep Wranglers
Enhance the driving experience in your Jeep with 3 quality Performance Exhaust Product components, starting at $38.99.
Dynomax – Dual – 2.5in Axle-Back Exhaust System – Super Turbo Muffler: Stainless Steel (Part No.39510)
from
$282.99
Give your Jeep Wrangler JK a dual exit exhaust system with a DynoMax Super Turbo dual 2.5-in. axle-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow, reduces turbulence and absorbs unwanted interior resonance for a mellow tone.
Product Features:
See More
Product Features:
- COMPATIBILITY : Designed for Jeep Wrangler JK; see product information for compatibility and engine specifications
- PERFORMANCE UPGRADE : Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement
- COMPLETE SOLUTION : Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps
- EASY TO INSTALL : Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding
- IMPROVED FLOW CAPACITY : Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- PRECISION DESIGN : Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications
- PREMIUM PERFORMANCE : Large flow tubes improve exhaust flow and reduce backpressure
- ENGINEERED TO LAST: Stainless-steel muffler reduces corrosion and internal drainage system reduces moisture collection
- SPECS : 3-in. Outlet double wall, buffed and polished stainless-steel slant cut tips
Dynomax – Ultra Flo Exhaust Muffler: Universal Fit Stainless Steel, 14" L, 2.5" In, 2.5" Out, Oval (Part No.17283)
from
$156.99
DynoMax Ultra Flo SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo SS Polished mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- Polished finish for a show quality shine
- Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dynomax – Exhaust Intermediate Pipe (Part No.53840)
from
$38.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS: Made from stainless steel for durability and long life
- BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Most Popular 2015 Jeep Wrangler Performance Air Intake Kits
Customize your Jeep with 8 Performance Air Intake Kits products
like Engine Cold Air Intakes and
Performance Air Intake Kits, all
priced under $524.99.
K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.77-1566KP)
from
$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque.
- Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
- Engineered to provide high airflow and exceptional filtration.
- Replaces factory air filter and intake tube.
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
- Typical installation can be completed in 60 minutes or less with simple hand tools.
- No-Hassle Lifetime Limited Warranty.
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.71-1566)
from
$524.99
Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Powder-coated aluminum intake tube paired with dry synthetic air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 50,000 miles under normal highway driving conditions
- Typical installation can be completed in 90 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- HIGH QUALITY: Made in America.
K&N – Cold Air Intake: Guaranteed To Increase Horsepower, With Washable Air Filter (Part No.57-1566)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9007)
from
$212.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – NextGen Cold Air Intake: Adds Up To 21.3 Horsepower, With Washable Air Filter (Part No.50-1566)
from
$449.99
This K&N NextGen cold air intake system is engineered for Jeep Wrangler V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.7% to your engine and provides an increase of 21.34 horsepower and 25.2 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
- NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
- Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
- Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
- Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
- Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
- 50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
- Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.
aFe POWER – Momentum GT Cold Air Intake: Gain up to 9% More Airflow With Dry Air Filter For Easy Maintenance (Part No.50-70001D)
from
$435.99
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 5″ flange and is 9″ tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Product Features:
See More
Product Features:
- High Quality 1-Pc. Roto-Molded Sealed Housing
- CAD Designed Roto-Molded Intake Tube
- Built In Sight Window Provides Easy Inspection Of Filter
- Unique Filter-to-Housing Interface
aFe POWER – Momentum GT Cold Air Intake: Gain up to 12% More Airflow With Oiled Air Filter For Maximum Airflow (Part No.50-70001R)
from
$419.99
A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5″ round flange and is 8″ tall with an inverted top and features our pre-oiled Pro 5R media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installation
Product Features:
See More
Product Features:
- Pro 5R Filter Media
- 5-Layer Progressive Cotton Gauze Media
- Washable And Reusable
- Rotomolded Tube
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12092-1)
from
$376.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- 360 deg. Radial Flow Air Filter
- Pre-Oiled Media
- 5.5 in. 360 deg. Air Filter
- Dyno Tested Intake Tube
Top Picks for 2015 Jeep Wrangler Performance Suspension Products
Upgrade Jeep Wranglers with top-quality Performance Suspension Products parts, including 5 OEM and aftermarket selections for your 2015 model.
Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101R)
from
$41.49
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101G)
from
$41.49
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Energy Suspension – CntrlArmBshngKt (Part No.2.3108R)
from
$135.99
CntrlArmBshngKt
Energy Suspension – MasterBshKt (Part No.2.18108R)
from
$859.99
MasterBshKt
Energy Suspension – MasterBshKt (Part No.2.18108G)
from
$859.99
MasterBshKt
In-Demand Performance Steering Products for 2015 Jeep Wranglers
Select from 7 premium Performance Steering Products parts for your 2015 Jeep Wrangler, with prices ranging from $40.99 to $469.99.
Energy Suspension – SwyBarBshKt (Part No.2.5113R)
from
$41.49
SwyBarBshKt
Energy Suspension – SwyBarBshKt (Part No.2.5113G)
from
$41.49
SwyBarBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4110R)
from
$469.99
BodyMntBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4109R)
from
$388.99
BodyMntBshKt
Energy Suspension – BodyMntBshKt (Part No.2.4111G)
from
$272.99
BodyMntBshKt
Rancho – Steering Damper RS5000 (Part No.RS5418)
from
$93.99
Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on-road and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.
Product Features:
See More
Product Features:
- IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
- ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires
- ENGINEERED TO LAST – Features protective boot to safeguard shock rod and oil seal
- HANDLES EXTREME TEMPERATURE CHANGES – Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
- BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty
Energy Suspension – SwyBarBshKt (Part No.2.5112R)
from
$40.99
SwyBarBshKt
Most Sold 2015 Jeep Wrangler Performance Air Filters
Explore our best-selling Jeep parts for the 2015 Wrangler among 1 OEM and aftermarket options starting from $68.99.
K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2364)
from
$68.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
- REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
- ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
Top-Rated Performance and Racing Products Brands For Your 2015 Jeep Wrangler
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2015 Jeep Wranglers. Below you’ll find some of our best rated Performance and Racing Products from K&N, and more. Performance and Racing Products from these brands that fit a 2015 Wrangler start at just $68.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2015 Jeep Wrangler Performance and Racing Products
When it comes to maintaining or upgrading your 2015 Jeep Wrangler, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2015 Jeep Wrangler. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $68.99, with an average price of just $355.66. Plus, with over 35 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$472.99
(2)
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
“Great product and immediate effects! Easy to install and sounds good under the hood. Good buy and great price from K&N!”
from
$68.99
(31)
Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance
“Well built, the few HP boost is fun.”
from
$524.99
(2)
Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter
“Works great. Easy installation with instructions.”
FAQs for 2015 Jeep Wrangler Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2015 Jeep Wranglers?
Out of 31 Performance and Racing Products that fit 2015 Jeep Wranglers, the following parts are the top sellers:
- Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99
- Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (12452493) – $239.99
- Control Arm Bump Stop Set (10159657) – $41.49
What’s the price range for 2015 Jeep Wrangler Performance and Racing Products?
Performance and Racing Product prices for the 2015 Jeep Wrangler start at $38.99 and go up to $859.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2015 Jeep Wrangler?
The average price for Performance and Racing Products for the 2015 Jeep Wrangler is $290.86. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep Wrangler model years?
What are the cheapest Performance and Racing Products for my 2015 Jeep Wrangler?
The cheapest 2015 Jeep Wrangler Performance and Racing Products we carry in stock are:
- Exhaust Intermediate Pipe (11693818) – $38.99
- SwyBarBshKt (10600281) – $40.99
- Control Arm Bump Stop Set (10159657) – $41.49
- Control Arm Bump Stop Set (22907216) – $41.49
- SwyBarBshKt (10600161) – $41.49
What are the top-rated Performance and Racing Products that fit the 2015 Jeep Wrangler?
Out of 252 reviews by customers, our 2015 Jeep Wrangler Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2015 Jeep Wrangler and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (10443496) – $472.99
- Cold Air Intake: Guaranteed To Increase Horsepower, With Washable Air Filter (11971968) – $367.99
- Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (11405625) – $524.99
- Performance Air Filters
- Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (10443496) – $472.99
- Cold Air Intake: Guaranteed To Increase Horsepower, With Washable Air Filter (11971968) – $367.99
- Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (11405625) – $524.99
What types of Performance and Racing Products do you sell for my 2015 Jeep Wrangler?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2015 Jeep Wrangler:
Can I get help with 2015 Jeep Wrangler Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep Wrangler Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep Wrangler Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
