2015 Chevrolet Suburban Belts and Hoses

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 2015 Suburban. Advance Auto Parts has popular Suburban parts like Engine Cooling Hoses, Fuel Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Suburban model years including 1965, 1966, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2015 Chevrolet Suburban Belts and Hoses below and start saving instantly.

Popular 2015 Chevrolet Suburban Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Heater Hoses

Fuel Injector Hose Kits

Essential Belts and Hoses for 2015 Chevrolet Suburbans

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$16.29

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$26.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$29.99

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles.
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$49.99

Product Features:

Direct replacement – this fuel injector line is engineered to match the original fuel injector line on specified vehicles.
Robust materials – manufactured with a material-hardening process to ensure lines withstand high pressure during engine operation
Critical fix – because all fuel injectors lines have a one-time-use, crushable seal, replacement of entire line is necessary for optimal seal
Cost-effective solution – part is quality-tested and less expensive than getting replacement from dealership

from

$169.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future..

Product Features:

Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$16.29

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$157.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$21.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$148.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$101.99

This accessory drive tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. This part was designed for the 2014-2019 Chevrolet Silverado / GMC Sierra,Yukon/Cadillac Escalade with 4.3/5.3/6.2L. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part. This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a lift-lug feature for ease of installation, heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included

from

$92.99

This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty thermoplastic pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$74.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$86.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$59.99

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$128.99

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$30.49

Stretch Fit Drive Systems Demand Highly Engineered Solutions.

Product Features:

Specially formulated adhesive literally locks onto the cord, allowing the cord to elongate and stretch, but never lose tension
Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile cord
Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
NOTE: Stretch Fit belts are single-use only and must be replaced if removed

from

$50.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$33.99

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$39.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$31.49

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$37.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$23.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$63.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$42.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$27.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

Upgrade your 2015 Chevrolet Suburban with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2015 Chevrolet Suburban, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your Suburban functioning at its best. At Advance Auto Parts, we offer a wide selection of 24 Belts and Hoses for the 2015 Chevrolet Suburban, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Fuel Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2015 Chevrolet Suburban at great prices. Our Belts and Hoses inventory for this model ranges from just $23.99 to $169.99, with an average price of $65.07. Our 24 Belts and Hoses in stock come from 10 trusted brands, so you’re sure to find the right part for your 2015 Chevrolet Suburban without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2015 Chevrolet Suburban, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $30.49 and boast an impressive 5 stars average rating from customers. With 45 customer reviews and counting, our 2015 Chevrolet Suburban Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2015 Chevrolet Suburban is always ready to roll. We’re committed to providing you with everything you need to keep your Suburban in top shape, all in one place. Start shopping confidently below for your 2015 Chevrolet Suburban!

Best-Selling Engine Cooling Hoses for 2015 Chevrolet Suburbans

Enhance the driving experience in your Chevrolet with 1 quality Engine Cooling Hose components, starting at $169.99.

show more show less

from

$169.99

Upgraded material – this replacement engine heater hose assembly features aluminum Y-connectors for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
Complete replacement – hoses come with necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

Top Picks for 2015 Chevrolet Suburban Serpentine and V Belts

Upgrade Chevrolet Suburbans with top-quality Serpentine and V Belts parts, including 11 OEM and aftermarket selections for your 2015 model.

show more show less

from

$23.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$39.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$30.49

Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:

Designed for two- to four-point drives that do not require automatic or manual tensioning
Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
Elasticity allows for long-lasting performance and proper tension

from

$33.99

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$31.49

Designed for two- to four-point drives that do not require automatic or manual tensioning.
Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
Elasticity allows for long-lasting performance and proper tension
Elasticityáallows for long-lasting performance and proper tension

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$32.42

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$98.97

The ACDelco GM Original Equipment Air Conditioning Compressor Belt Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$42.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
Problem solver designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Tensioner Replacement is Recommended (if equipped)

from

$30.12

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$24.38

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

In-Demand Heater Hoses for 2015 Chevrolet Suburbans

Select from 4 premium Heater Hoses parts for your 2015 Chevrolet Suburban, with prices ranging from $59.99 to $128.99.

show more show less

from

$128.99

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$59.99

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$86.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$74.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

Most Sold 2015 Chevrolet Suburban Belt Tensioners

Explore our best-selling Chevrolet parts for the 2015 Suburban among 1 OEM and aftermarket options starting from $101.99.

show more show less

from

$101.99

Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Heavy duty steel pulley with a 6203 close tolerance ball bearings pocket for rugged durability and Electro-deposited coating for superior corrosion resistance
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
Installation instructions included

Top-Rated Belts and Hoses Brands For Your 2015 Chevrolet Suburban

Shop for the best-rated brands offering Belts and Hoses and other products for your 2015 Chevrolet Suburbans. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2015 Suburban start at just $23.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2015 Chevrolet Suburban Belts and Hoses

When it comes to maintaining or upgrading your 2015 Chevrolet Suburban, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2015 Chevrolet Suburban. With over 7 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.49, with an average price of just $52.34. Plus, with over 8 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$33.99

This product is not rated

Ela Poly Rib Belt

“”

from
$48.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.31" Diameter

“”

from
$30.49

This product is not rated

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required

“”

Popular Driveworks 2015 Chevrolet Suburban Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2015 Chevrolet Suburban owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2015 Suburban, Advance Auto Parts carries a full inventory of 1 Driveworks Belts and Hoses. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $23.99, plus, with more than 7 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$23.99

(7)

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count

“Fits perfect on my 99 mercury cougar.”

FAQs for 2015 Chevrolet Suburban Belts and Hoses

Which Belts and Hoses are best-sellers for 2015 Chevrolet Suburbans?

Out of 24 Belts and Hoses that fit 2015 Chevrolet Suburbans, the following parts are the top sellers:

Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (12482995) – $30.49
Accessory Drive Belt Tensioner – Original Equipment Quality (11692467) – $101.99
Ela Poly Rib Belt (10703273) – $33.99

What’s the price range for 2015 Chevrolet Suburban Belts and Hoses?

Belts and Hose prices for the 2015 Chevrolet Suburban start at $23.99 and go up to $169.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2015 Chevrolet Suburban?

The average price for Belts and Hoses for the 2015 Chevrolet Suburban is $65.07. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet Suburban model years?

Yes, we currently carry Belts and Hoses for 29 model years of Chevrolet Suburbans between 1947 and 2024. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 1966, and 1965.

What are the cheapest Belts and Hoses for my 2015 Chevrolet Suburban?

The cheapest 2015 Chevrolet Suburban Belts and Hoses we carry in stock are:

Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (3340104) – $23.99
Drive V-Belt (11939231) – $24.38
Driver Side Positive Crankcase Ventilation (PCV) Tube (50072214) – $27.99
Positive Crankcase Ventilation (PCV) Tube (50072210) – $27.99
High Pressure Fuel Line (50216954) – $29.99

What are the top-rated Belts and Hoses that fit the 2015 Chevrolet Suburban?

Out of 45 reviews by customers, our 2015 Chevrolet Suburban Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2015 Chevrolet Suburban and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (3340104) – $23.99
- Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (3290135) – $39.99

What types of Belts and Hoses do you sell for my 2015 Chevrolet Suburban?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2015 Chevrolet Suburban:

Can I get help with 2015 Chevrolet Suburban Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet Suburban Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet Suburban Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2015 Chevrolet Suburban Belts and Hoses

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Bottom Cog V-Belt; 49 Inch Long, Exact Fit Premium Quality (Part No.15490)

Gates – Automotive XL« High Capacity V-Belt (Part No.9560)

Driveworks – Automotive V-Belt, Driveworks (Part No.39517)

Dorman – High Pressure Fuel Line (Part No.904-966)

Dorman – High Pressure Fuel Line (Part No.904-965)

Dorman – Engine Heater Hose Assembly (Part No.626-738)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 7.50" Long, 1.50" Diameter (Part No.B70541)

Gates – Premium Molded Coolant Hose (Part No.20065)

Gates – Premium Modular Coolant Hose (Part No.24338)

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.88 Inch Long, 1.5 Inch Inner Dia. (Part No.81181)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 38.5" Long, 1.56" Diameter (Part No.E72776)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999545A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999366A)

Dorman – Engine Heater Hose Assembly (Part No.626-694)

Dorman – Engine Heater Hose Assembly (Part No.626-696)

Gates – Premium Molded Heater Hose (Part No.12117)

Gates – Premium Molded Heater Hose (Part No.12118)

Gates – Stretch Fit« Micro-V« Serpentine Drive Belt (Part No.K040355SF)

Gates – V-Ribbed Serpentine Belt: 75.346" Long, 6 Rib Count, Exact Fit (Part No.K060747)

Dayco – Ela Poly Rib Belt (Part No.E030296)

Dayco – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.5060715)

Dayco – Stretch Serpentine Belt; 30.43 Long, 3 Rib Count, Zip Tie Required (Part No.3PK773EE)

Dayco – Poly Rib Belt Serpentine Belt; 74.5 Long, 6 Rib Count (Part No.5060745)

Driveworks – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.715K6)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060930)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 72" Long, 6 Rib Count, Exact Fit (Part No.K060714HD)

Driveworks – Poly Rib Belt Serpentine Belt; 74.5 Long, 6 Rib Count (Part No.745K6)

Dorman – Engine Heater Hose Assembly (Part No.626-738)

Dorman – High Pressure Fuel Line (Part No.904-965)

Dorman – High Pressure Fuel Line (Part No.904-966)

Driveworks – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.715K6)

Dayco – Poly Rib Belt Serpentine Belt; 71.5 Long, 6 Rib Count (Part No.5060715)

Dayco – Stretch Serpentine Belt; 34.96 Long, 4 Rib Count, Zip Tie Required (Part No.4PK888EE)

Dayco – Ela Poly Rib Belt (Part No.E030296)

Dayco – Stretch Serpentine Belt; 30.43 Long, 3 Rib Count, Zip Tie Required (Part No.3PK773EE)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Dayco, Drive Belt (Part No.W10001221356DAY)

ACDelco – 12658178 GM Original Equipment Air Conditioning Compressor Belt Kit with Tool (Part No.W1005603985ACD)

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 72" Long, 6 Rib Count, Exact Fit (Part No.K060714HD)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000603773BAN)

Mitsuboshi – Drive V-Belt (Part No.W1000663122MBL)

Gates – Premium Molded Heater Hose (Part No.12118)

Gates – Premium Molded Heater Hose (Part No.12117)

Dorman – Engine Heater Hose Assembly (Part No.626-696)

Dorman – Engine Heater Hose Assembly (Part No.626-694)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999545A)