2015 BMW 320i xDrive Drivetrains
Find Your Specific 2015 BMW 320i xDrive Drivetrains
Below you will find various in-demand BMW Drivetrains, components and accessories for your 2015 320i xDrive. Advance Auto Parts has popular 320i xDrive parts like Transfer Cases, Drive Shafts and Axles, CV Axles and Joints and more. You’ll also find aftermarket and OEM Drivetrains for other 320i xDrive model years including
2013,
2014,
2016,
2017,
2018 and more. Select a category of 2015 BMW 320i xDrive Drivetrains below and start saving instantly.
Popular 2015 BMW 320i xDrive Drivetrains Categories
Essential Drivetrains for 2015 BMW 320i xDrives
Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9005)
from
$717.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Febi – Axle Shaft Nut (Part No.K4030118037FEB)
from
$13.27
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Beck/Arnley – Cu Boot Kit (Part No.103-2966)
from
$32.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Original Equipment – Transfer Case Assemb (Part No.J71561369319OEA)
from
$3560.52
Transfer Case Assemb
Meyle – Subframe Bushing (Part No.L1020183850MEY)
from
$42.58
Subframe Bushing
GKN Drivetech – Axle Assembly, New (Part No.K4000436985GKN)
from
$913.28
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
National – Bearings (Part No.106-CC)
from
$41.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.108)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Whiteline – Differential Mount Bushing (Part No.KDT919)
from
$94.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Product Features:
See More
Product Features:
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Corteco – Axle Output Shaft Seal (Part No.K4062254230CFW)
from
$21.60
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Corteco – Trans Case Output Sh (Part No.J7121670615CFW)
from
$17.00
Trans Case Output Sh
EMPI – RE CV Joint Boot Kit (Part No.K6010182701EMP)
from
$31.88
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Febi – CV Joint Boot Kit (Part No.K6010292557FEB)
from
$48.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
National – Bearings (Part No.210-L)
from
$64.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Autopart International Inc – Driveshaft Flex Join (Part No.K10201916859API)
from
$84.76
Driveshaft Flex Join
Corteco – Input Shaft Seal (Part No.J1156254228CFW)
from
$20.29
Input Shaft Seal
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
MOOG Driveline Products – Drive Shaft Coupler (Part No.679)
from
$117.99
Designed to restore ride quality and reduce noise, vibration and harshness, MOOG premium driveline couplers are the perfect replacement for worn or deteriorated OE couplers.
Product Features:
See More
Product Features:
- RESTORES PERFORMANCE — Isolates driveline vibrations to restore ride quality and reduce driveline noise, vibration and harshness
- STRONG AND DURABLE — Reinforced high-grade nylon 66 wire for optimal strength and longer coupler life
- RELIABLE REPLACEMENT — Premium replacement for worn or deteriorated OE couplers
- INSTALLATION READY — Comes with premium hardware for easy installation (where applicable)
- PREMIUM MATERIALS — Made from premium rubber for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020408186FEB)
from
$154.99
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
Dorman – FLEXIBLE COUPLING (Part No.935-117)
from
$148.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)
from
$92.53
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
- Comes with bolts and washers (where applicable)
- Easy to install
- Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
Dorman – Driveshaft Flex Coupler (Part No.935-404)
from
$379.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance..
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 2015 BMW 320i xDrive with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2015 BMW 320i xDrive, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Drivetrains are key to keeping your 320i xDrive functioning at its best. At Advance Auto Parts, we offer a wide selection of 44 Drivetrains for the 2015 BMW 320i xDrive, designed to meet your needs without breaking the bank.
From
Transfer Case
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2015 BMW 320i xDrive at great prices.
Our Drivetrains inventory for this model
ranges from just $2.67 to $3,560.52, with
an average price of $389.94.
Our 44 Drivetrains in stock come from 17 trusted brands, so you’re sure to find the right part for your 2015 BMW 320i xDrive without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2015 BMW 320i xDrive is always ready to roll. We’re committed to providing you with everything you need to keep your 320i xDrive in top shape, all in one place.
Start shopping confidently below for your 2015 BMW 320i xDrive!
Best-Selling Transfer Cases for 2015 BMW 320i xDrives
Enhance the driving experience in your BMW with 12 quality Transfer Case components, starting at $2.67.
Original Equipment – Transfer Case Assemb (Part No.J71561369319OEA)
from
$3560.52
Transfer Case Assemb
Rein – Transfer Case Overhaul Kit (Part No.RVK0002)
from
$1969.99
Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein’s Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle direct from the factory.
Product Features:
See More
Product Features:
- Kit includes all OE components
- Solution for transfer cases that were damaged from overheating or lack of service.
- Made to strict OE engineering quality standards.
Rein – Transfer Case Overhaul Kit (Part No.RVK0001)
from
$1855.99
Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein’s Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle direct from the factory.
Product Features:
See More
Product Features:
- Kit includes all OE components
- Solution for transfer cases that were damaged from overheating or lack of service.
- Made to strict OE engineering quality standards.
Original Equipment – Transfer Case Motor (Part No.J7100796492OEA)
from
$1614.92
Transfer Case Motor
National – Bearings (Part No.210-L)
from
$64.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.108)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.710746)
from
$23.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Corteco – Axle Output Shaft Seal (Part No.K4062254230CFW)
from
$21.60
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Corteco – Input Shaft Seal (Part No.J1156254228CFW)
from
$20.29
Input Shaft Seal
Corteco – Trans Case Output Sh (Part No.J7121670615CFW)
from
$17.00
Trans Case Output Sh
Worldpac – TRANS CASE INPUT SFT (Part No.J71202695533OEA)
from
$6.46
TRANS CASE INPUT SFT
Original Equipment – Trans Case Input Sft (Part No.J7120686914OEA)
from
$2.67
Trans Case Input Sft
Most Popular 2015 BMW 320i xDrive Drive Shafts and Axles
Customize your BMW with 19 Drive Shafts and Axles products
like Drive Shaft and Axles,
Center Support Bearings, and
Axle Shaft Bearings, all
priced under $1,272.36.
National – Bearings (Part No.106-CC)
from
$41.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99166)
from
$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)
from
$92.53
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
- Comes with bolts and washers (where applicable)
- Easy to install
- Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
Vaico – Q+ OE Quality Driveshaft Support with Bearing (Part No.K1030448485VCO)
from
$160.14
The Vaico Driveshaft Support with Bearing is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Made in Germany OE Quality
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications Q+ The Seal of Excellence
- ALWAYS OEM QUALITY
- ALWAYS MADE IN GERMANY
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6133)
from
$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2017
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.45 INCH / 11 MM
- MOUNT WIDTH: 6.30 INCH / 160 MM
- STYLE: ROUND FRAME
- WITH WINGS
Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)
from
$13.99
Drive Shaft-Ctr Support Bearng
Worldpac – Driveshaft (Part No.K10003116089DOR)
from
$1272.36
Driveshaft
Dorman – Front Drive Shaft: Adjustable (Part No.938-277)
from
$1044.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
GKN Drivetech – Axle Assembly, New (Part No.K4000436988GKN)
from
$916.90
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
GKN Drivetech – Axle Assembly, New (Part No.K4000436985GKN)
from
$913.28
GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.
Product Features:
See More
Product Features:
- OEM Quality and a Direct fit Replacement
- Provides exceptional reliability.
- Improved space utilization through power unit and gearbox repackaging potential.
- Lighter weight provides improved fuel efficiency.
- Better driving characteristics and comfort
- Optimum power delivery for peak vehicles
Dorman – Rear Drive Shaft: Adjustable (Part No.986-208)
from
$896.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Autopart International Inc – Axle Assembly (Part No.K40003110161API)
from
$512.52
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40003110212API)
from
$486.89
Axle Assembly
Dorman – Driveshaft Flex Coupler (Part No.935-404)
from
$379.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance..
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Febi – Drive Shaft Flex Joint (Guibo) (Part No.K1020408186FEB)
from
$154.99
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.
Product Features:
See More
Product Features:
- OE quality, fit and performance
- High quality rubber
- Reinforced with advanced materials
- Excellent vibration control
Dorman – FLEXIBLE COUPLING (Part No.935-117)
from
$148.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MOOG Driveline Products – Drive Shaft Coupler (Part No.679)
from
$117.99
Designed to restore ride quality and reduce noise, vibration and harshness, MOOG premium driveline couplers are the perfect replacement for worn or deteriorated OE couplers.
Product Features:
See More
Product Features:
- RESTORES PERFORMANCE — Isolates driveline vibrations to restore ride quality and reduce driveline noise, vibration and harshness
- STRONG AND DURABLE — Reinforced high-grade nylon 66 wire for optimal strength and longer coupler life
- RELIABLE REPLACEMENT — Premium replacement for worn or deteriorated OE couplers
- INSTALLATION READY — Comes with premium hardware for easy installation (where applicable)
- PREMIUM MATERIALS — Made from premium rubber for long-lasting dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Autopart International Inc – Driveshaft Flex Join (Part No.K10201916859API)
from
$84.76
Driveshaft Flex Join
Febi – Axle Shaft Nut (Part No.K4030118037FEB)
from
$13.27
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Top Picks for 2015 BMW 320i xDrive CV Axles and Joints
Upgrade BMW 320i xDrives with top-quality CV Axles and Joints parts, including 10 OEM and aftermarket selections for your 2015 model.
Beck/Arnley – Cu Boot Kit (Part No.103-2966)
from
$32.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Rein – CV Boot Kit (Part No.BKN0116)
from
$34.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
GKN Drivetech – CV Boot Kit (Part No.K6010292557GKN)
from
$73.21
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
GKN Drivetech – CV Boot Kit (Part No.K6010240551GKN)
from
$63.80
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.
Product Features:
See More
Product Features:
- For every specific application a boot kit to the OES standard
- Reliable protection against damp and dirt
- Optimum sealing and abrasion resistance
- Manufactured according to DIN EN ISO 9001:2000
Worldpac – DIFF. SIDE COVER SEA (Part No.J70414187329REI)
from
$52.28
DIFF. SIDE COVER SEA
Febi – CV Joint Boot Kit (Part No.K6010292557FEB)
from
$48.15
With Clamps and Grease The Febi CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – CV Joint Boot Kit (Part No.K6010240551RIN)
from
$45.59
With Clamps and Grease The Rein CV Joint Boot Kit is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – CV Boot Kit (Part No.BKN0099R)
from
$44.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
EMPI – RE CV Joint Boot Kit (Part No.K6010182701EMP)
from
$31.88
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Ajusa – Diff. Side Cover O-R (Part No.J7042433122AJU)
from
$4.82
Diff. Side Cover O-R
In-Demand Differentials for 2015 BMW 320i xDrives
Select from 3 premium Differentials parts for your 2015 BMW 320i xDrive, with prices ranging from $8.45 to $94.99.
Meyle – Subframe Bushing (Part No.L1020183850MEY)
from
$42.58
Subframe Bushing
Whiteline – Differential Mount Bushing (Part No.KDT919)
from
$94.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Product Features:
See More
Product Features:
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Corteco – Pinion Seal (Part No.J7010481192CFW)
from
$8.45
Pinion Seal
FAQs for 2015 BMW 320i xDrive Drivetrains
Which Drivetrains are best-sellers for 2015 BMW 320i xDrives?
Out of 44 Drivetrains that fit 2015 BMW 320i xDrives, the following parts are the top sellers:
- Bearings (3272109) – $41.49
- Shaft Repair Sleeve (18445101) – $34.99
- OE Solutions Driveshaft Flex Joint Coupler (12094990) – $92.53
What’s the price range for 2015 BMW 320i xDrive Drivetrains?
Drivetrain prices for the 2015 BMW 320i xDrive start at $2.67 and go up to $3,560.52 for the most premium parts.
What’s the average price of a Drivetrain for a 2015 BMW 320i xDrive?
The average price for Drivetrains for the 2015 BMW 320i xDrive is $389.94. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other BMW 320i xDrive model years?
What are the cheapest Drivetrains for my 2015 BMW 320i xDrive?
The cheapest 2015 BMW 320i xDrive Drivetrains we carry in stock are:
- Trans Case Input Sft (12107953) – $2.67
- Diff. Side Cover O-R (11967167) – $4.82
- TRANS CASE INPUT SFT (50089022) – $6.46
- Pinion Seal (12239059) – $8.45
- Axle Shaft Nut (10785233) – $13.27
What types of Drivetrains do you sell for my 2015 BMW 320i xDrive?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2015 BMW 320i xDrive:
Can I get help with 2015 BMW 320i xDrive Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Drivetrains and more.
What is your return policy for BMW 320i xDrive Drivetrains?
Advance Auto Parts keeps returns simple. For new BMW 320i xDrive Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
