2015 BMW 320i xDrive Drivetrains
Find Your Specific 2015 BMW 320i xDrive Drivetrains
Below you will find various in-demand BMW Drivetrains, components and accessories for your 2015 320i xDrive. Advance Auto Parts has popular 320i xDrive parts like Transfer Cases, Drive Shafts and Axles, CV Axles and Joints and more. You’ll also find aftermarket and OEM Drivetrains for other 320i xDrive model years including
2013,
2014,
2016,
2017,
2018 and more. Select a category of 2015 BMW 320i xDrive Drivetrains below and start saving instantly.
Popular 2015 BMW 320i xDrive Drivetrains Categories
Essential Drivetrains for 2015 BMW 320i xDrives
Rein – CV Boot Kit (Part No.BKN0099R)
from
$48.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
Rein – CV Boot Kit (Part No.BKN0116)
from
$37.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
URO Parts – Driveshaft Support (Part No.26128615621)
from
$45.99
For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.
See More
Dorman – Driveshaft Flex Coupler (Part No.935-117)
from
$171.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi-Purpose Bearing (Part No.210-L)
from
$64.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Drive Shaft: Adjustable (Part No.938-277)
from
$1201.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Driveshaft Assembly (Part No.986-565)
from
$1033.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Drive Shaft: Adjustable (Part No.986-208)
from
$1031.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9005)
from
$746.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100 percent dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100 percent NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100 percent dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
National – Redi-Sleeve (Part No.99204)
from
$49.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
Rein – Transfer Case Overhaul Kit (Part No.RVK0001)
from
$1884.99
Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein’s Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle direct from the factory.
Product Features:
See More
Product Features:
- Kit includes all OE components
- Solution for transfer cases that were damaged from overheating or lack of service.
- Made to strict OE engineering quality standards.
Rein – Transfer Case Overhaul Kit (Part No.RVK0002)
from
$2001.99
Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein’s Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle direct from the factory.
Product Features:
See More
Product Features:
- Kit includes all OE components
- Solution for transfer cases that were damaged from overheating or lack of service.
- Made to strict OE engineering quality standards.
Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)
from
$15.99
Drive Shaft-Ctr Support Bearng
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6133)
from
$86.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2017
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.45 INCH / 11 MM
- MOUNT WIDTH: 6.30 INCH / 160 MM
- STYLE: ROUND FRAME
- WITH WINGS
Upgrade your 2015 BMW 320i xDrive with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2015 BMW 320i xDrive, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Drivetrains are key to keeping your 320i xDrive functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Drivetrains for the 2015 BMW 320i xDrive, designed to meet your needs without breaking the bank.
From
Transfer Case
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2015 BMW 320i xDrive at great prices.
Our Drivetrains inventory for this model
ranges from just $15.99 to $2,001.99, with
an average price of $553.66.
Our 12 Drivetrains in stock come from 5 trusted brands, so you’re sure to find the right part for your 2015 BMW 320i xDrive without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 2015 BMW 320i xDrive is always ready to roll. We’re committed to providing you with everything you need to keep your 320i xDrive in top shape, all in one place.
Start shopping confidently below for your 2015 BMW 320i xDrive!
Best-Selling Transfer Cases for 2015 BMW 320i xDrives
Enhance the driving experience in your BMW with 3 quality Transfer Case components, starting at $64.99.
Rein – Transfer Case Overhaul Kit (Part No.RVK0002)
from
$2001.99
Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein’s Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle direct from the factory.
Product Features:
See More
Product Features:
- Kit includes all OE components
- Solution for transfer cases that were damaged from overheating or lack of service.
- Made to strict OE engineering quality standards.
Rein – Transfer Case Overhaul Kit (Part No.RVK0001)
from
$1884.99
Rein OE Transfer Case Overhaul Kit is a solution kit developed to perform a complete overhaul of the X-Drive transfer case. The complete kit includes bearings, clutch packs, shims, magnets, retainers, hardware, seals, and other necessary internal components. Until now, the only solution to repair these failure prone transfer cases was to replace with a complete assembly at the dealer or install a used assembly at the local shop. No other options were available due to no offering for internal components. All the components offered in Rein’s Transfer Case Overhaul Kit are OE, identical to the original parts on the vehicle direct from the factory.
Product Features:
See More
Product Features:
- Kit includes all OE components
- Solution for transfer cases that were damaged from overheating or lack of service.
- Made to strict OE engineering quality standards.
National – Multi-Purpose Bearing (Part No.210-L)
from
$64.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Most Popular 2015 BMW 320i xDrive Drive Shafts and Axles
Customize your BMW with 6 Drive Shafts and Axles products
like Center Support Bearings,
Drive Shaft Center Supports, and
Drive and Prop Shaft Assemblies, all
priced under $1,201.99.
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6133)
from
$86.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to BMW 06-17;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2006-2017
- Weight approx: 1 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.45 INCH / 11 MM
- MOUNT WIDTH: 6.30 INCH / 160 MM
- STYLE: ROUND FRAME
- WITH WINGS
Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)
from
$15.99
Drive Shaft-Ctr Support Bearng
Dorman – Drive Shaft: Adjustable (Part No.938-277)
from
$1201.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Drive Shaft: Adjustable (Part No.986-208)
from
$1031.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Driveshaft Flex Coupler (Part No.935-117)
from
$171.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
- Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
URO Parts – Driveshaft Support (Part No.26128615621)
from
$45.99
For European vehicles, A.P.A. manufactures the URO Parts brand of quality replacement parts, which meet or exceed OEM specifications. URO Parts components are ideal for both professional and DIY vehicle repair, and are often the exclusive aftermarket alternative to overpriced ¿Genuine¿ components. By reducing deferred maintenance with URO Parts, you will increase the bottom line of your business. With its URO Premium line, A.P.A. offers problem-solving upgraded components that are superior to failure-prone OEM parts in design and/or materials. A.P.A. is so confident in the longevity and reliability of URO Premium products. URO Parts also specializes in accurate reproduction parts for classic vehicles, including a huge variety of items that are no longer available from the dealer.
See More
Top Picks for 2015 BMW 320i xDrive CV Axles and Joints
Upgrade BMW 320i xDrives with top-quality CV Axles and Joints parts, including 2 OEM and aftermarket selections for your 2015 model.
Rein – CV Boot Kit (Part No.BKN0116)
from
$37.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches original equipment design specifications
Rein – CV Boot Kit (Part No.BKN0099R)
from
$48.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific inner and outer axle boot kits come complete with everything needed to do a proper installation, including OE grease and all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
- Comes with the OE grease
- Boot manufactured with highest quality materials to prevent cracking, wear and leaking
- Matches Original Equipment design specifications
In-Demand Differentials for 2015 BMW 320i xDrives
Select from 1 premium Differentials parts for your 2015 BMW 320i xDrive.
National – Redi-Sleeve (Part No.99204)
from
$49.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
See More
FAQs for 2015 BMW 320i xDrive Drivetrains
Which Drivetrains are best-sellers for 2015 BMW 320i xDrives?
Out of 12 Drivetrains that fit 2015 BMW 320i xDrives, the following parts are the top sellers:
- Center Support Bearing Motor Mount: Center, 1 Piece (11931992) – $86.99
- Drive Shaft-Ctr Support Bearng (11324475) – $15.99
- CV Boot Kit (11825329) – $37.99
What’s the price range for 2015 BMW 320i xDrive Drivetrains?
Drivetrain prices for the 2015 BMW 320i xDrive start at $15.99 and go up to $2,001.99 for the most premium parts.
What’s the average price of a Drivetrain for a 2015 BMW 320i xDrive?
The average price for Drivetrains for the 2015 BMW 320i xDrive is $553.66. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other BMW 320i xDrive model years?
What are the cheapest Drivetrains for my 2015 BMW 320i xDrive?
The cheapest 2015 BMW 320i xDrive Drivetrains we carry in stock are:
- Drive Shaft-Ctr Support Bearng (11324475) – $15.99
- CV Boot Kit (11825329) – $37.99
- Driveshaft Support (50184664) – $45.99
- CV Boot Kit (11324866) – $48.99
- Redi-Sleeve (20440006) – $49.99
What types of Drivetrains do you sell for my 2015 BMW 320i xDrive?
As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 2015 BMW 320i xDrive:
Can I get help with 2015 BMW 320i xDrive Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Drivetrains and more.
What is your return policy for BMW 320i xDrive Drivetrains?
Advance Auto Parts keeps returns simple. For new BMW 320i xDrive Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
