2014 Toyota Tacoma Air Suspension and Kits
More 2014 Toyota Tacoma Air Suspension and Kits
Find your specific 2014 Toyota Tacoma original or aftermarket Air Suspension and Kits below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2014 Toyota Tacoma Air Suspension and Kits
Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line (Part No.2158)
from
$551.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors (Part No.2543)
from
$1154.99
While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.
Product Features:
See More
Product Features:
- Controls Two Air Springs Simultaneously
- Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)
Firestone Ride-Rite – Controls Two Air Springs Individually, With Compressor/Gauge, Switch Operated (Part No.2178)
from
$776.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.
Product Features:
See More
Product Features:
- Designed To Provide Inflation Control Of Your Air Helper Springs
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
- Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
Timbren SES – Rubber Spring, Inside Coil Spring Mount, 14,000Lb, Aeon Hollow Rubber (Part No.TOFTUN4)
from
$306.99
Timbren suspension enhancement system The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.
Product Features:
See More
Product Features:
- Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
- Control Trailer Sway: A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
- Control Body Roll: During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
- Improve The Ride: By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesn’t Have To Mean Poor Ride Quality
- Economical And Trouble Free
- Simple And Easy To Install
Timbren SES – Rubber Spring, Inside Coil Spring Mount, Aeon Hollow Rubber, With Helper Springs (Part No.TORTUN4L)
from
$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.
Product Features:
See More
Product Features:
- Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
- Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
- Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
- Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
- Economical And Trouble Free
- Simple And Easy To Install
aFe POWER – Sway-A-Way Shock Kit (Part No.102-0052-01)
from
$796.99
aFe Control introduces these Sway-A-Way High Performance replacement shock absorbers for the 2005-2020 Toyota Tacoma.. These 2.0″ diameter shocks feature all the same race winning engineering and components that have 20+ years of testing into a specifically designed kit that will bolt directly into your daily driven vehicle. This kit offers adjustable ride height and better off road damping curves without sacrificing any on road comfort or handling. These rear shocks are 100% designed and built in the USA that feature bright zinc plated steel cylinder bodies and CNC machined aluminum components. This package is designed as a direct fit application and requires no modifications to the vehicle.
Product Features:
See More
Product Features:
- CNC Machined Components Made To The Strictest Tolerances
- Polished Nitro Steel Shaft for Strength And Durability
- Teflon Lined Steel Spherical Bearings
- Multi-Seal Carrier To Ensure Zero Leakage
Suncore – Shock Kit (Part No.2-12S254051-001)
from
$39.99
Shock Kit
Suncore – Quick Strut Kit (Part No.2-55S11081-001)
from
$164.99
Quick Strut Kit
Suncore – Quick Strut Kit (Part No.2-55S11563-001)
from
$194.99
Quick Strut Kit
Rancho – Suspension Kit (Part No.RS66903R9)
from
$487.99
Level out the front of your Toyota® Tacoma truck or 4Runner SUV by 2.25-in. with the LEVEL IT system from Rancho®. This leveling system features sway bar spacers and Rancho RS9000®XL struts for superior on-road comfort and off-road performance.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Toyota Tacoma trucks and 4Runner SUVs
- LEVELED STANCE — Reduces factory rake and levels out truck’s stance by 2.25-in. (aftermarket bumpers, winches, etc. affect lift height)
- COMPLETE SOLUTION — Kit includes two sway bar spacers, two Rancho RS9000®XL struts (coil springs not included) and mounting hardware to accommodate tires up to 33-in. (must use OE springs and top mounting components)
- DELIVERS SUPERIOR PERFORMANCE — Rancho RS9000®XL struts with nine-position damping control for superior on-road comfort and off-road performance
- ENHANCED CONTROL — Sway bar spacers correct end link angles for roll and sway control
- EASY TO INSTALL — Bolt-on installation for an easy upgrade
- COMPLETE PERFORMANCE UPGRADE FOR TACOMA– Transform your suspension with Rancho RS9000®XL rear shocks (RS999319), performance upper control arms (RS64901) and rear block kit (RS70901), all sold separately
- COMPLETE PERFORMANCE UPGRADE FOR 4RUNNER — Transform your suspension with Rancho RS9000®XL rear shocks (RS999305), performance upper control arms (RS64903) and rear block kit (RS70080), all sold separately
- NOTES — Allows the use of OE wheels/tires, must use OE springs and top mounting components, trimming required for 33-in. wheel/tire (tire size varies between manufacturers)
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)
from
$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).
Product Features:
See More
Product Features:
- Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
- Formulated to help prevent gear wear and protect against rust and corrosion
- Formulated to deliver enhanced protection against deposits
- Helps provide better protection during extreme operating conditions
Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
KYB – Strut Mount, Insulator, Bushing and Washers (Part No.SM5640)
from
$41.49
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Daystar – Suspension Systems (Part No.KT09103BK)
from
$158.99
Daystar Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and u-bolts to provide complete front and rear kits. Daystar offers a the most complete line of kits for most of the popular vehicles, including virtually all late-model domestic and import applications Almost all of the lift and leveling kits used on strut applications feature an easy-install design, no disassembly of the strut is required Comfort Ride Kits are the perfect start to achieving that custom look without compromising performance, reliability, or affordability.
Product Features:
See More
Product Features:
- No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
- Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
- Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
- Top Mount Easy Install Design
TrailFX – 2"Lift, Strut Assembly Extensions, With Strut Assembly Extensions/Hardware (Part No.T20LL1)
from
$99.99
TrailFX has produced a line of leveling and rear block kits that are engineered to provide consumers with the very best in quality performance at an attractive price point. TrailFX suspension products allow you to level your vehicle or raise it for additional tire clearance, all while maintaining your factory ride.
Product Features:
See More
Product Features:
- Fastest, Safest, Least Expensive Way To Bring The Front Of Your Vehicle Level With The Rear
- Strut Extension Will Maintain A Smooth OEM Ride Without Adding Pressure To Stock Suspension Components
- Toughest Finish. Safest Way To Level Lift
- Smart Strut Technology Mounts On Top Of The Strut Assembly, Eliminating The Hassle, Time And Danger Of Compressing Springs
- Installation Is Simple And Requires No Strut Preloading, Cutting, Or Modification Of Factory Installed Parts
Firestone Ride-Rite – Air Spring, Frame Mount, 3200 To 5000 Pound Leveling Capacity (Part No.2304)
from
$519.99
Ride-Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200 to 5,000 Pounds per set.
Product Features:
See More
Product Features:
- Level The Vehicle Front-To-Rear And Side-To-Side
- Adjustability 5 To 100 PSI
- Stabilize The Vehicle While Loaded
- Maximize Vehicles Load Carrying Capacity
- Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
Rancho – Suspension Leaf Spring Block Kit (Part No.RS70901)
from
$265.99
Designed to level out your Toyota® Tacoma, the Rancho® rear lift block kit raises the rear an additional 1.5-in. to accommodate larger wheel/tire combinations.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Toyota Tacoma trucks (excludes TRD Pro)
- LIFTS AND LEVELS — Raises the rear of the truck an additional 1.5-in. to level out the entire vehicle (aftermarket bumpers, winches, etc. affect lift height)
- FITS LARGER TIRES — Allows the use of larger wheel/tires without body or fender modifications (tire size varies by manufacturer)
- EASY TO INSTALL — Kit includes two rear blocks, four coated U-bolts and eight nuts that install easily
- RESISTS CORROSION — Zinc-coated hardware resists rust and corrosion
- COMPLETE PERFORMANCE UPGRADE — Transform your suspension with a Rancho LEVEL IT system, Rancho quickLIFT®, performance upper control arms, Rancho RS9000®XL or RS5000®X rear shocks, sold separately, see Rancho catalog for details
ReadyLift – 1 Inch Rear Lift, Cast Iron, Includes 2 Rear Blocks/4 U-Bolts And Hardware (Part No.66-5001)
from
$195.99
ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.
Product Features:
See More
Product Features:
- Made From Cast Iron/Not Light Weight Extrusions
- Built In Locator Pin/Not Pressed In
- Puts Rake Back In Your Truck For Towing/Hauling
- Installation Time Is About An Hour
Daystar – 1" Lift, Strut Assembly Spacer, With 2 Strut Spacers And All Necessary Hardware (Part No.KT09105BK)
from
$51.99
Daystar Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and u-bolts to provide complete front and rear kits. Daystar offers a the most complete line of kits for most of the popular vehicles, including virtually all late-model domestic and import applications Almost all of the lift and leveling kits used on strut applications feature an easy-install design, no disassembly of the strut is required Comfort Ride Kits are the perfect start to achieving that custom look without compromising performance, reliability, or affordability.
Product Features:
See More
Product Features:
- No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
- Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
- Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
- Top Mount Easy Install Design
ReadyLift – 2 Inch Rear Lift, Cast Iron, Includes 2 Rear Blocks/4 U-Bolts And Hardware (Part No.66-5002)
from
$217.99
ReadyLift(R) OEM style rear block kits are now available for model specific applications. Based on OEM designs and never made out of light weight extrusions our 2 Inch GMC Sierra or Chevy Silverado Rear Blocks are made from cast iron and have Anti-Rotation ears built-In. Fits classic and new body style 6-lug model GM trucks. New model 2007-UP 2WD and 4WD Trucks with OEM 1.25 Inch blocks will want to take advantage of the additional 1 Inch of lift for towing and hauling, particularly when using a front leveling kit. This block is 2.25 Inch which when removing the factory 1.25 Inch block, results in an increased rear lift of 1 Inch. ReadyLift(R) Block Kits will put a slight rake back in your Truck for hauling or towing and are designed to work in concert with your ReadyLift(R) Suspension Leveling Kit.
Product Features:
See More
Product Features:
- Made From Cast Iron/Not Light Weight Extrusions
- Built In Locator Pin/Not Pressed In
- Puts Rake Back In Your Truck For Towing/Hauling
- Installation Time Is About An Hour
Firestone Ride-Rite – Air Spring, Frame Mount, 3200 To 5000 Pound Leveling Capacity (Part No.2407)
from
$539.99
Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.
Product Features:
See More
Product Features:
- Level The Vehicle Front-To-Rear And Side-To-Side
- Adjustability 5 To 100 PSI
- Stabilize The Vehicle While Loaded
- Maximize Vehicles Load Carrying Capacity
- Everything Is Included For A Quick, Easy Installation. Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation
Skyjacker – Leveling Kit, 2 in Lift, Metal Spacer, With Hardware (Part No.TT20MS)
from
$246.99
Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.
Product Features:
See More
Product Features:
- 6 Leveling Kit Merchandiser Packages To Choose From, With The Hottest Moving Applications
- Levels Out Factory Rake Not Affecting Your Ride Quality
- Allows For The Use Of Larger Wheel And Tire Combinations
- Easy To Install, Spacers Mount On Top Of The Strut, No Strut Compressor Required
- Limited Lifetime Warranty
Popular 2014 Toyota Tacoma Air Suspension and Kits Categories
2014 Toyota Tacoma Air Suspension and Kits
Maybe you’re in the middle of a full rebuild of that 2014 Toyota Tacoma. Maybe you just need a couple of Air Suspension and Kits. Either way, Advance Auto Parts has 25 different Air Suspension and Kits in our inventory ranging from $6.29 to $1,217.99. That means you can find the exact parts or products you need to keep that 2014 Toyota Tacoma running smoothly.
Air Suspension and Kits are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2014 Toyota Tacoma. Valvoline, KYB, and Suncore are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Air Suspension and Kits for your 2014 Toyota Tacoma, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Air Suspension and Kits to keep your 2014 Toyota Tacoma rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Air Suspension and Kits Brands To Make Your 2014 Toyota Tacoma Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2014 Toyota Tacoma demands trusted brand parts and products to keep it running. Many trusted brands of Air Suspension and Kits make up Advance Auto Parts’ inventory, and all are ready to help make your Tacoma the best it can be. Be sure to browse some of our top Air Suspension and Kits brands and parts.
Popular Valvoline Air Suspension and Kits
We carry Valvoline parts in our stock across Suspension Self-Leveling Unit Fluids categories, plus more. For a 2014 Toyota Tacoma, our most popular Valvoline Air Suspension and Kits include:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
FAQs for 2014 Toyota Tacoma Air Suspension and Kits
What are the most purchased Air Suspension and Kits for the 2014 Toyota Tacoma?
Out of 25 Air Suspension and Kits for the 2014 Toyota Tacoma, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
