2014 Toyota FJ Cruiser Ignition and Tune-Up Products

Essential 2014 Toyota FJ Cruiser Ignition and Tune-Up Products

YEC – Direct Ignition Coil – (Coil on Plug) (Part No.F3005335384YEC)

Direct Ignition Coil - (Coil on Plug)

from

$66.41
The YEC Ignition Coil is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • Meets or exceeds the OE specifications for durability and performance
  • High profile insulation to prevent arching.
  • Radio-Frequency Interference (RFI) Suppression
  • Engineered to withstand extremes in temperatures
See More

Accel – Ignition Coil, Supercoil, Toyota 2.4/2.7/4.0L-14/V6 (Part No.140495)

Ignition Coil, Supercoil, Toyota 2.4/2.7/4.0L-14/V6

from

$88.99
Supercoils produce up 15% more spark energy then OEM, better throttle response, maximize fuel mileage, less than an hour to install.

Product Features:
  • High Temp Epoxy Resists Shock And Vibration
  • Advanced Bobbin Technology
  • Installation Usually In Less Than An Hour
  • Direct OEM Replacement
  • OBD II Compatible – Will Not Trip A Code
See More

DENSO – Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT (Part No.4704)

Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH20TT

from

$10.99
Durability of an OE style plug combined with Power & Torque of high performance.

Product Features:
  • 0.4mm Iridium Center Electrode: World’s Smallest Diameter that maximizes firing potential
  • 0.7mm Needle Tip Ground Electrode: Promotes higher spark energy and less heat quenching
  • DENSO Patented Optimized Iridium-Rhodium Alloy Formula: Highest concentration of Iridium vs. competitors for greater durability
  • DENSO Patented 360 degree laser welding process: Ensuring exceptional quality bond and structural strength with the Iridium Center Electrode
  • Durability of an OE style plug combined with Power & Torque of high performance.
  • Withstands temperatures greater than 4000° Fahrenheit
  • Iridium TT
See More

NGK – OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PLFR6A-11 (Part No.7654)

OE Series Laser Platinum Spark Plug: Fine Wire Tip Design, PLFR6A-11

from

$16.99
NGK Laser Platinum spark plugs provide high ignitability and longer service life compared to conventional nickel spark plugs. Laser Platinum plugs are tested to the highest standards to ensure quality and durability. Engineered specifically for OE applications. Laser platinum plugs provide stable idling, superior anti-fouling, improved fuel efficiency and lower emissions. High-grade pure alumina ceramic and 98% pure copper core prevents spark plug from overheating and provides reliable starts. Most Laser Platinum spark plugs feature a platinum pad on the ground electrode for even wear in distributorless ignition systems.

Product Features:
  • ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction fine wire platinum alloy center electrode provides consistent performance
  • PLATINUM ALLOY CENTER ELECTRODE: Longer wearing and higher temperature resistance compared to traditional nickel spark plugs
  • PLATINUM TIP GROUND ELECTRODE: Unless OE specified, platinum protection at the ground electrode provides excellent ignitability and service life
  • SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
  • TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
  • RECOMMENDED USAGE: Best for vehicles with OE fine wire platinum alloy plugs
See More

NGK – Coil on Plug Boot (Part No.59009)

Coil on Plug Boot

from

$7.99
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.

Product Features:
  • PREMIUM GRADE SILICONE: Designed to withstand harsh environments
  • OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
See More

DENSO – Iridium Long Life Spark Plug (Part No.F1000316471ND)

Iridium Long Life Spark Plug

from

$16.25
The DENSO Iridium Long Life spark plug was specifically designed for long service life and consistent performance in the latest, most advanced production cars DENSO’s patented iridium alloy is more durable than even platinum, allowing the center electrode to be shrunk to only 0.7mm in diameter. This produces a dramatic improvement in ignitability and spark plug life. Closely related to platinum and exhibiting even tougher qualities, the rare metal iridium is an ideal material for spark plugs. A fine-wire, 0.7mm iridium center electrode is 360-degree laser welded in place using an exclusive DENSO process, and then matched to a platinum ground electrode. This pair of precision-formed, premium-metal electrodes dramatically extends the plug’s useful life.

Product Features:
  • Fine-wire iridium center electrode
  • Platinum ground electrode
  • 360 degree laser-welded spark tip
  • Sustained spark performance over 100,000 miles
  • Withstands higher pressures and temperatures
See More

Nippon Reinz – Spark Plug tube Seal (Part No.A8027168107NRZ)

Spark Plug tube Seal

from

$4.49
Nippon Reinz Spark Plug tube Seal withstands high and low temperatures to provide a reliable seal with minimal tightening. Spark Plug tube Seals are increasingly produced with profiles and not flat; that is, the gasket surface is provided with beads or lips. Now, instead of the entire gasket surface, only the profile needs to be pressed, that is, the sealing bead or sealing lip, and just a slight amount of bolting force produces sufficient deformation and adaptation.

Product Features:
  • Stays cool at temperature up to 1800F
  • Designed to seal minor surface irregularities
  • No re-torque required
  • Teflon® coating optional
See More

Felpro – SPARK PLUG TUBE SEAL SET (Part No.ES 72701)

SPARK PLUG TUBE SEAL SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)

Power Steering Fluid - 12 oz

from

$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.

Product Features:
  • Unique friction technology provides efficient and noise-free operation
  • Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
  • Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
  • Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
  • Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
See More

Idemitsu – Type HP Automatic Transmission Fluid – 1 qt (Part No.10107-042F)

Type HP Automatic Transmission Fluid - 1 qt

from

$10.29
Formulated to meet the specific requirements of Subaru vehicles equipped with conventional (non-CVT) transmissions up to model year 2005. Recommended for service-fill in all Subaru automatic transmissions where SUBARU ATF HP is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Provides superior cleanliness, maintaining the transmission free of sludge and varnish deposits
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
  • Advanced anti-wear technology provides maximum protection to gears and bearings
See More

Carquest Premium – Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications (Part No.35-7117)

Spark Plug Boot: 1 Boot, Meets or Exceeds OE Specifications

from

$6.49
Carquest Premium spark plug boots are engineered to restore ignition boot reliability and performance. They are designed to meet or exceed original equipment (O.E.) specifications for fit, form and function. Our spark plug boots offer excellent heat resistance as well as maximum protection against spark loss. Carquest Premium spark plug boots are built with a durable silicone compound for resistance to high heat and abrasion, resulting in a longer-lasting ignition repair.

Product Features:
  • OE design provides an exact fit for your application
  • Provides excellent heat resistance as well as maximum protection against spark loss
  • Durable silicone compound for resistance to high heat or abrasion
  • Spring included with the spark plug boot
  • Design for direct compatibility
See More

NTK – Ignition Knock (Detonation) Sensor (Part No.ID0215)

Ignition Knock (Detonation) Sensor

from

$119.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
  • NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
  • The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
See More

FAE – FAE Knock Sensor (Part No.F6020176532FAE)

FAE Knock Sensor

from

$122.29
The FAE OE quality knock sensor is engineered to the exact specifications of the vehicle manufacturer to ensure the replacement sensor is the same in quality and function as the part installed as first equipment.

Product Features:
  • OEM quality direct fit application
  • Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
  • Mounting hole is the same size as OE
  • Maintains OE specifications for frequency response
See More

Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBC3674)

Ignition Knock (Detonation) Sensor

from

$181.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
  • Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Dorman – Ignition Coil Connector (Part No.645-940)

Ignition Coil Connector

from

$19.99
This ignition coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this ignition coil connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – A/C Compressor Clutch Connector (Part No.PTA1042)

A/C Compressor Clutch Connector

from

$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Center High Mount Stop Light Connector (Part No.PTA1472)

Center High Mount Stop Light Connector

from

$33.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Ignition Switch (Part No.CSA1188)

Ignition Switch

from

$62.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Vemo – Ignition Switch (Part No.M5050178870VMO)

Ignition Switch

from

$74.41
Ignition Switch

Carquest – Ignition Switch (Part No.CS535)

Ignition Switch

from

$37.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Copper alloy conductors ensure superior electrical conductivity with low resistive losses
  • Our parts are 100% tested to verify both mechanical and electrical switching performance
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Dorman – Ignition Starter Switch (Part No.989-719)

Ignition Starter Switch

from

$111.99
This replacement ignition switch is a direct replacement for a damaged or worn-out original equipment switch Made of quality materials for durability, this part has been tested to ensure a proper fit.

Product Features:
  • Ideal replacement – this ignition switch matches the fit and function of the original equipment switch to restore proper operation to the ignition circuit
  • Durable construction – this ignition switch is made of quality materials to ensure reliable performance and a long service life
  • Cost-effective solution – offers original equipment performance at competitive price
  • Quality tested – this part has undergone try-on testing to ensure a quality fit
See More

2014 Toyota FJ Cruiser Ignition and Tune-Up Products

You count on your 2014 Toyota FJ Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 40 Ignition and Tune-Up Products ranging in price from $2.29 to $322.99, you’re sure to find everything you need for your 2014 Toyota FJ Cruiser.

Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 17 different brands like Autolite, NGK, and DENSO. 2014 Toyota FJ Cruiser Ignition and Tune-Up Products start as low as $2.29!

One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 896 extensive product reviews on 2014 Toyota FJ Cruiser Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16HR11 with 4.9 stars and Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IKH16TT with 4.7 stars.

Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2014 Toyota FJ Cruiser below to get started!

Top-Rated Ignition and Tune-Up Products Brands For Your 2014 Toyota FJ Cruiser

Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2014 Toyota FJ Cruiser running right for years to come. In our inventory you’ll find brands like Autolite, NGK, DENSO, and even more.

Popular Champion Ignition and Tune-Up Products

You’ll find popular Champion brand products across Spark Plugs. All are waiting to get your 2014 Toyota FJ Cruiser back on the road. Some of the top-rated Champion products in these categories are:

Top-Rated Autolite Ignition and Tune-Up Products


If Autolite are what you’re looking for, our inventory holds plenty. We stock Autolite brand Ignition and Tune-Up Products for your 2014 Toyota FJ Cruiser, and some of our most reviewed Autolite parts include:

FAQs for 2014 Toyota FJ Cruiser Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 2014 Toyota FJ Cruiser?

Out of 40 Ignition and Tune-Up Products for the 2014 Toyota FJ Cruiser, the most popular in our inventory are:
NGK Iridium IX Spark Plug
from $12.99
(104)
NGK Iridium IX Spark Plug
Spark Plugs

What are the top-rated 2014 Toyota FJ Cruiser Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your 2014 Toyota FJ Cruiser based on customer reviews/ratings are:
Iridium Long-Life Spark Plug:  OE Performance, last 100K+ Miles, SK16HR11
from $11.49
(67)
Iridium Long-Life Spark Plug: OE Performance, last 100K+ Miles, SK16HR11
“Can go wrong with denso original spark plugs”
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH16
from $11.79
(32)
Iridium Power Spark Plug: Maximum Spark Energy, 0.4mm Iridium Tip, IKH16
“Perfect plugs…less $$ than NGK, Gap was right out of the box. Gas Mileage was in the mid 20’s with leaking NGK..replaced with these plugs 32.3 avg o”