2014 Porsche 911 Belts and Hoses

Name: Multi Rib (Serpentine) Belt
Brand: Bando
SKU: W100054383BAN
Price: 49.38 USD

Below you will find various in-demand Porsche Belts and Hoses, components and accessories for your 2014 911. Advance Auto Parts has popular 911 parts like Belt Tensioners, Heater Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other 911 model years including 2012, 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and more. Select a category of 2014 Porsche 911 Belts and Hoses below and start saving instantly.

Popular 2014 Porsche 911 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

V-Belts

HVAC Air Inlet Housing Drain Hoses

Essential Belts and Hoses for 2014 Porsche 911s

from

$49.38

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$29.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$6.09

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$31.49

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$11.25

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$54.49

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$54.89

The Mitsuboshi Drive Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$37.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Meets or exceeds all specifications from the Original Equipment Manufacturer.
Designed for small diameter pulleys, backside idlers, and for use with (or without) automatic tensioners.
Special belt constructions eliminate belt noise, reduce tension loss, and solve problem drive applications.
Utilizes advanced materials like Aramid Fiber found in bullet-proof vests and crack and heat resistant EPDM materials.
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$54.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$71.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$30.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$49.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$32.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$36.49

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$232.99

This Litens hydraulic actuator is manufactured by the Original Equipment (O.E.) supplier of this popular Porsche tensioner component. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Caution: A low quality hydraulic actuator may leak causing damage to the belt drive system. For best results always use an OE quality actuator. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic tensioning technology.
Installation instructions included.
No tensioner or pulley included.
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$50.58

Acc. Belt Tension Pu

from

$152.15

Original Equipment Accessory Belt Tensioner is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.

Product Features:

OE-Equivalent and a direct fit application.
High tension spring assembly
Precision bearing assembly
High quality cast components
Durable long life performance.

from

$30.50

Air Inlet Housing Dr

Upgrade your 2014 Porsche 911 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2014 Porsche 911, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Belts and Hoses are key to keeping your 911 functioning at its best. At Advance Auto Parts, we offer a wide selection of 13 Belts and Hoses for the 2014 Porsche 911, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2014 Porsche 911 at great prices. Our Belts and Hoses inventory for this model ranges from just $18.79 to $232.99, with an average price of $78.42. Our 13 Belts and Hoses in stock come from 10 trusted brands, so you’re sure to find the right part for your 2014 Porsche 911 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Porsche 911, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $36.49 and boast an impressive 5 stars average rating from customers. With 203 customer reviews and counting, our 2014 Porsche 911 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Porsche 911 is always ready to roll. We’re committed to providing you with everything you need to keep your 911 in top shape, all in one place. Start shopping confidently below for your 2014 Porsche 911!

Best-Selling Belt Tensioners for 2014 Porsche 911s

Enhance the driving experience in your Porsche with 2 quality Belt Tensioner components, starting at $50.58.

show more show less

from

$232.99

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic tensioning technology.
Installation instructions included.
No tensioner or pulley included.
Professional Mechanics will change this tensioner in approx. 20 minutes to 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$50.58

Acc. Belt Tension Pu

Most Popular 2014 Porsche 911 Heater Hoses

Customize your Porsche with 1 Heater Hoses products like HVAC Air Inlet Housing Drain Hoses, all priced under $30.50.

show more show less

from

$30.50

Air Inlet Housing Dr

Top Picks for 2014 Porsche 911 Serpentine and V Belts

Upgrade Porsche 911s with top-quality Serpentine and V Belts parts, including 10 OEM and aftermarket selections for your 2014 model.

show more show less

from

$56.60

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$49.49

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$49.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$18.79

This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OEM requirements

from

$44.99

The Dayco double sided poly-V belt is designed for multiple accessory drives requiring the transmission of power from both sides of the belt. Manufactured from an extreme temperature EPDM rubber, it features a construction that uses a highly fiber loaded compound on both belt sides to maximize load carrying requirements while minimizing pulley misalignment noise. In addition, the processes utilized in the production of this belt employs advanced manufacturing techniques allowing the overall belt thickness to be minimized, ultimately resulting in a cooler running belt.

Product Features:

Designed to provide longer service life and a reduction in noise
Meets or exceeds SAE J1459 and SAE J2432 specifications
Engineered to offer long-lasting durability

from

$36.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$76.35

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$52.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$45.74

Drive Belt

from

$39.31

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

Top-Rated Belts and Hoses Brands For Your 2014 Porsche 911

Shop for the best-rated brands offering Belts and Hoses and other products for your 2014 Porsche 911s. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2014 911 start at just $18.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2014 Porsche 911 Belts and Hoses

When it comes to maintaining or upgrading your 2014 Porsche 911, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2014 Porsche 911. With over 3 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49, with an average price of just $43.66. Plus, with over 31 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$44.99

(4)

Double Sided Poly Rib Belt Serpentine Belt; 71.85 Long, 6 Rib Count

“great price on good product, especially when using a coupon!!!”

from
$49.49

(24)

Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count

“Exactly what was needed and good quality.”

from
$36.49

(3)

Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count

“It’s a belt. It fit the Volvo 850 GLT I own. Belt quality seems fine, nothing stands out good or bad there. Before you swap this belt, get the correct”

Popular Driveworks 2014 Porsche 911 Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2014 Porsche 911 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2014 911, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your Porsche in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $18.79 to $49.49, plus, with more than 25 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$18.79

(2)

Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count

“So far so good. Nice tight fit. It’s a serpentine belt. Given the range of pricing, probably the best value if you can change the belt yourself.”

from
$49.49

(23)

Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count

“Time will tell. The Drive-Rite serpentine belt appears to be well made, and it fit my Chevy Lumina perfectly. We’ll see how its formulation performs a”

FAQs for 2014 Porsche 911 Belts and Hoses

Which Belts and Hoses are best-sellers for 2014 Porsche 911s?

Out of 13 Belts and Hoses that fit 2014 Porsche 911s, the following parts are the top sellers:

Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (5061148) – $49.49
Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count (5063035) – $18.79
Micro-V« Serpentine Drive Belt (10495611) – $52.99

What’s the price range for 2014 Porsche 911 Belts and Hoses?

Belts and Hose prices for the 2014 Porsche 911 start at $18.79 and go up to $232.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2014 Porsche 911?

The average price for Belts and Hoses for the 2014 Porsche 911 is $78.42. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Porsche 911 model years?

Yes, we currently carry Belts and Hoses for 59 model years of Porsche 911s between 1965 and 2024. Belts and Hoses are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2016, 2015, 2013, and 2012.

What are the cheapest Belts and Hoses for my 2014 Porsche 911?

The cheapest 2014 Porsche 911 Belts and Hoses we carry in stock are:

Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count (5063035) – $18.79
Air Inlet Housing Dr (11868040) – $30.50
Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count (3290129) – $36.49
Multi-Rib (Serpentine) Belt (10811160) – $39.31
Double Sided Poly Rib Belt Serpentine Belt; 71.85 Long, 6 Rib Count (15060051) – $44.99

What are the top-rated Belts and Hoses that fit the 2014 Porsche 911?

Out of 203 reviews by customers, our 2014 Porsche 911 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2014 Porsche 911 and their top-rated products:

Serpentine and V Belts
- Multi Rib (Serpentine) Belt (10811308) – $56.60
- Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (5061148) – $49.49
- Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (3290130) – $49.49

What types of Belts and Hoses do you sell for my 2014 Porsche 911?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2014 Porsche 911:

Can I get help with 2014 Porsche 911 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Belts and Hoses and more.

What is your return policy for Porsche 911 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Porsche 911 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Porsche 911 Belts and Hoses

Bando – Multi Rib (Serpentine) Belt (Part No.W100054383BAN)

Gates – Automotive XL« High Capacity V-Belt (Part No.9425)

Driveworks – Automotive V-Belt, Driveworks (Part No.40013)

Gates – Notched V-Belt: 31.44" Long, 1 Strand, Exact Fit (Part No.7305)

ContiTech – Drive V-Belt (Part No.W100053285CON)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100090500CON)

Mitsuboshi – Drive Belt (Part No.W1000367341MBL)

Gates – V-Ribbed Serpentine Belt: 69.57" Long, 6 Rib Count, Exact Fit (Part No.K060690)

Gates – V-Ribbed Serpentine Belt: 83.755" Long, 6 Rib Count, Exact Fit (Part No.K060832)

Dayco – Poly Rib Belt Serpentine Belt; 76.11 Long, 7 Rib Count (Part No.5070760)

Driveworks – Poly Rib Belt Serpentine Belt; 76.11 Long, 7 Rib Count (Part No.760K7)

Driveworks – Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (Part No.695K6)

Dayco – Poly Rib Belt Serpentine Belt; 88.58 Long, 6 Rib Count (Part No.5060885)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060612)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999674A)

INA – Acc. Belt Tension Pu (Part No.G6011518951INA)

Original Equipment – Original Equipment Accessory Belt Tensioner (Part No.G6000160824OEA)

Aftermarket – Air Inlet Housing Dr (Part No.R2155948936OEA)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999674A)

INA – Acc. Belt Tension Pu (Part No.G6011518951INA)

Aftermarket – Air Inlet Housing Dr (Part No.R2155948936OEA)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000162789CON)

Dayco – Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (Part No.5060695)

Driveworks – Poly Rib Belt Serpentine Belt; 69.5 Long, 6 Rib Count (Part No.695K6)

Driveworks – Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count (Part No.690K6)

Dayco – Double Sided Poly Rib Belt Serpentine Belt; 71.85 Long, 6 Rib Count (Part No.6060719)

Dayco – Poly Rib Belt Serpentine Belt; 69.09 Long, 6 Rib Count (Part No.5060690)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578688ACD)

Gates – Micro-V« Serpentine Drive Belt (Part No.K060695)

Worldpac – Drive Belt (Part No.W10003555506CON)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100028009MBL)