2014 Nissan Titan Bodies and Fender Parts

New CAPA Certified Premium Replacement Passenger Side Fender, With Antenna Hole, Without Fender Flares

Product Features:

• With Antenna Hole, Without Fender Flares, Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Passenger Side Fender, With Antenna Hole, Without Fender Flares

Product Features:

• With Antenna Hole, Without Fender Flares, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

• Full front end coverage
• Custom fit exactly to your vehicle
• Installs easily with no drilling or tools
• Leather grain vinyl
• Protect against rock chips, bugs and road tar
• Soft inner layer

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Driver Side Fender Liner, 04-09 XE Models And 10-13 Without Wheel Flares

Product Features:

• 04-09 XE Models And 10-13 Without Wheel Flares, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Laser Measured MudFlaps are custom fit and protect your vehicle s fenders and exterior from rocks, mud, road grime and other debris picked up by your vehicle s wheels. No drilling required and installs in Minutes.

Product Features:

• Contoured Specifically For Each Application And Molded From A Proprietary Thermoplastic Resin
• MudFlap Will Offers Undeniable Vehicle Protection
• Features The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provides Protection For Your Vehicles Most Vulnerable Areas Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Laser Measured For A Perfect Fit Set Literally Mounts In Minutes (In Most Applications) Without The Need For Wheel Or Tire Removal
• Most Importantly Mounts Without The Need For Drilling Into The Vehicles Fragile Painted Metal Surface

The WeatherTech Mud Flap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/ tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech Mud Flap will offer undeniable vehicle protection.

Product Features:

• QuickTurn Hardened Stainless Steel Fastening System
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Laser Measured For A Perfect Fit Set Literally Mounts-In-Minute
• No Drilling Required

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

• Classic Styling Of Brite-Tread Aluminum
• Front Or Rear Wheel Protection
• Radius Notch Contours To The Fender Well
• Protected By A BriteGard Powder Coat Finish

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

New Standard Replacement Passenger Side Fender Liner, 04-09 XE Models, 10-13 Without Wheel Flares

Product Features:

• 04-09 XE Models, 10-13 Without Wheel Flares, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Assembly, Chrome, With Park Assist Sensor Holes, LE/SE Models, Without Big Tow Package

Product Features:

• Chrome, With Park Assist Sensor Holes, LE/SE Models, Without Big Tow Package, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Assembly, Chrome, Without Park Assist Sensor Holes, LE/SE Models, Without Big Tow Package

Product Features:

• Chrome, Without Park Assist Sensor Holes, LE/SE Models, Without Big Tow Package, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

SG6 LED Running Boards are designed to be vehicle specific and require a mount kit (sold separately). Kit includes driver and passenger side e-coated steel mount brackets, complete with hardware and installation instruction sheet.

Product Features:

• Black Powder Coat Finish
• E-Coated Steel
• 5 Year Warranty

Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you Do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:

• Rugged 12 Gauge Steel Construction Or Heavy Duty Aluminum
• NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Grated Steel Top Provides Unmatched Traction
• Dirt And Water Drain Away To Keep The Board Clear Of Debris
• Made In Americas Heartland USA

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 1 Pad On The Bar
• 60 To 180 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Welded End Caps Add A Clean, Finished Appearance While Keeping The Elements Out: Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris

Extruded aluminum. Slip resistant rubber step area. Molded end caps add unique style. Cradle mounted boards.

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Corrosion Resistant Extruded Aluminum Board
• Slip Resistant Textured Step Surface
• Injection Molded Polymer End Caps
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit Available PN[27-6000]

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• Mounting Braces Not Included
• Widened 6 Inch Step Area
• No Drilling Required

Westin Molded Running Boards are straight board OE style designs, available in three universal lengths (72in, 79in, 93in). Universal running boards are made of an extruded aluminum base board, feature a 1-piece construction and provide step area grooves for secure footing. Available in lighted or unlighted styles. Universal running boards require a 27-series vehicle specific mounting kit, sold separately.

Product Features:

• OE Style
• UV Resistant Black Molded Polymer
• Extruded Aluminum Base Board
• Cradle Mounted Boards
• Customized Mounting Brackets Sold Separately
• Adds Perfect Finishing Touch To Vehicle

Trucks these days keep getting bigger and bigger. Whether you use your monster for work or play, the 6 Inch UltraBlack Tube Step design gives you a rugged step for climbing in and out of your beast. Constructed of heavy-duty steel with an oval design our UltraBlack Tube Step features molded plastic end caps and step pads at each door to keep your feet planted securely to the step when entering and exiting the vehicle. The rugged step pads are embossed with the Dee Zee name and provide a stylish non-slip surface. Let face it, as strong as steel is, it is also is susceptible to rust and corrosion. Our UltraBlack Tube step is protected by a textured black NRT (TM) (No Rust Technology) powder coat, a finish specially developed to increase corrosion protection.

Product Features:

• Mount Kit Not Included
• Drilling Not Required
• Made From Rugged 16-Gauge Steel
• 6 Inch Wide Design To Maximize Step Area
• Molded Step Pads At Each Door Provide Unmatched Traction
• Textured Black Powder Coated Featuring NRT (TM)

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad
• Lifetime Warranty

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad
• 3 Year Limited Warranty

A tubular side step for your vehicle. Dee Zee Universal Steps are available when a custom fit application is not available for your vehicle. Drilling is required into the vehicle frame for mounting. Sturdy hidden bracing and hardware is coated to help prevent rust and keep your tubes strong. Molded plastic step pads provide a non-skid stepping area. Universal Nerf Bars are available in 3 Inch Round or 4 Inch Oval designs. 3 Inch Round designs are available in UltraShine Aluminum, Black Aluminum, Polished Stainless Steel or Black Steel. 4 Inch Oval designs feature UltraShine Aluminum or Black Aluminum.

Product Features:

• Mounting Kit Included
• Frame Body Mount Bolts
• Drilling Required
• 1 Pad On The Bar
• Frame Mounted For Maximum Strength
• Powder Coated Steel Braces Resist Rust
• Powder Coated Steel Braces Resist Rust
• Molded Plastic Step Pads For Secure Footing
• Fit Most Full And Mid Size Pickups

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Mount Kit Included
• Rocker Panel Mount
• Drilling Not Required
• 2 Pads On The Bar
• 60 To 180 Minute Professional Installation Time
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability
• Extra-Large Molded Step Pads Provide Slip-Resistant Entry And Exit Points To The Cab
• Provides Moderate Protection Against Road Hazards And Debris

Westin’s HDX Stainless Drop Nerf Step Bars are built with corrosion-resistant, textured black painted stainless steel designed to last under the toughest of conditions. With 1-piece construction, these nerf step bars provide over 2 added inches of toe/heel step area than our competitors and fit tight to the vehicle’s rocker panel for a solid fit and rugged look. HDX Stainless Drop Nerf Step Bars include stainless steel step pads. Step plates are rust resistant and provide maximum traction. Bolt-on installation with no drilling is required. Includes mount kit.

Product Features:

• Corrosion Resistant Black Powder-Coated Stainless Steel
• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Features A Notched Bar Design With Heavy-Duty Step Plate
• Includes Rust Resistant Stainless Steel Step Plates
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

Westin introduces their new Premier 6 Oval Tube Steps in a highly Polished Stainless Steel or Black Powdercoat Mild Steel finish. The new Premier 6 Oval Side Bars offer tough solid construction with a sleek 5 step pad. Available in 4 lengths 53 75 85 and 91. To ensure a perfect fit Vehicle-Specific Mounting Kits are required and are purchased separately. Each mounting kit is exactly machined for a No-Drill Installation.

Product Features:

• Unique Style w/Tough Construction
• Sleek Style And Finish
• OE Style Look
• UV Stable 5 in. Wide Step Pad
• Stylized End Caps
• Contoured Step Pad