2014 Mini Cooper Exhaust Parts

Name: Direct-Fit Exhaust System Replacement Kit
Brand: BRExhaust
SKU: 106-0905
Price: 437.00 USD

Below you will find various in-demand Mini Exhaust Parts, components and accessories for your 2014 Cooper. Advance Auto Parts has popular Cooper parts like Exhaust Gaskets, Exhaust Manifold and Headers, Catalytic Converters and more. You’ll also find aftermarket and OEM Exhaust Parts for other Cooper model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2014 Mini Cooper Exhaust Parts below and start saving instantly.

Popular 2014 Mini Cooper Exhaust Parts Categories

Exhaust Manifold and Headers

Catalytic Converters

Exhaust System Kits

Exhaust Manifold Gaskets

Exhaust Manifold Studs

Catalytic Converter Clamps

Essential Exhaust Parts for 2014 Mini Coopers

from

$437.00

Direct-Fit Exhaust System Replacement Kit

from

$515.99

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0831 takes the guesswork out of replacing your 2007-2014 Mini Cooper 1.6L exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0831’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0831 features durable aluminized steel construction and is covered by a limited warranty. BRExhaust 106-0831 is engineered for OEM 18307587363 exhaust replacement.

Product Features:

Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
Leaves all emissions equipment intact, maintaining emissions compliance

from

$765.99

The Mach Force XP cat-back exhaust system produces 11 hp and 10 lbs./ft. of torque. constructed from 2.75 in. mandrel bent 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. Comes with dual 3.5 in. polished 304 stainless steel tips and muffler to build a mellow yet powerful sound. Engineered and manufactured in our Corona Ca manufacturing facility. All systems use factory mounting locations providing stability and hassle-free installation. High quality band clamps are used for a complete 360 deg. sealing surface. A free flowing muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance it also reduces sound decibels ultimately minimizing exhaust drone.

Product Features:

2.5 in. Dia. 409 Stainless Steel
100% Hand TIG Welded
Factory Hanger Locations
50 State Legal

from

$908.99

Testing: Up to 31% increase in Flow. 14″ Muffler: This system incorporates a large 14″ stainless steel muffler which produces a mellow sound while virtually eliminating exhaust drone. Flow and Performance: This MACH Force-Xp cat-back exhaust system is constructed of 2-1/2″ mandrel bent 304 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower and torque. Retains Rear Catalytic Converter: The rear cat is retained on this system to maintain a smooth deep sound but more importantly to keep the system street legal. Dual 3-1/2″ Polished Center Exit Tips: Finishing off the exhaust are dual 3-1/2″ polished stainless steel tips with laser-etched aFe power logos for an aggressive style.

Product Features:

Mandrel Bent Stainless Steel Tubing
Free Flowing Muffler
Smooth Curves
Hassle Free Installation

from

$37.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

from

$16.49

As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

from

$7.29

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

from

$8.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

from

$36.99

Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:

Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.

from

$7.99

Rein OE quality studs are manufactured with premium materials and are direct replacements for the OE.

Product Features:

Ensures proper tightening and retention of the exhaust flanges.
Designed as direct-fit replacements to ensure trouble-free proper installations.
Manufactured to strict engineering standards and specifications in materials and tolerances.

from

$1688.99

Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker® Ultra® EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.á
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá– OE-style high technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
STRONGáANDáDURABLE –áFeaturesáthick OE-style flangesáand manifoldsáfor strengtháand durability
APPLICATION-ENGINEERED — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
APPLICATION-ENGINEERED –áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE — Backed by Walker’s emissions and structural integrity warranty. Visit Walkerexhaust.com for details.

from

$739.99

This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles
Convenient kit – includes gaskets and downpipe hardware to simplify installation
Durable construction -manufactured within strict tolerances for reliable longevity
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$1115.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5531028. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2015 Mini Cooper, 2011-2016 Mini Cooper Countryman, and more, this direct-fit catalytic converter also interchanges with OE part 18 40 7 559 400. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$959.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52472. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Mini Cooper and interchanges with OE parts 18 30 7 645 202 and 18 30 7 613 670. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$197.99

Product Features:

EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

from

$953.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49351. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2002-2008 Mini Cooper and interchanges with OE parts 18 40 7 533 402 and 18 40 7 539 134, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$1372.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49028. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2007-2015 Mini Cooper, 2011-2016 Mini Cooper Countryman, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 559 400 and 18 40 7 599 503. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$281.99

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51654. The Universal design allows the part to fit a wide array of vehicles, cutting and welding required, and the stainless steel construction of this spun” Body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun” Body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$307.99

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

from

$1879.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5461350. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2012 Mini Cooper and interchanges with OE parts 18 30 7 558 755 and 18 30 7 583 146, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$580.99

Replace the faulty or old front catalytic converter with the all new aFe Power direct-fit catalytic converter for the 2007-2013 MINI Cooper S (R56) with L4-1.6L turbo engine. Our Direct-Fit cats are constructed out of 100% MIG welded 409 stainless steel and are EPA Compliant.

Product Features:

Stainless Steel Construction
Laser Cut Flanges
100% MIG-Welded
Direct Bolt On

from

$862.99

Product Features:

EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

from

$1074.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5571029. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2007-2010 Mini Cooper and interchanges with OE parts 18 30 2 755 157 and 18 30 7 649 140, among others. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$1250.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5571472. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2015 Mini Cooper and interchanges with OE parts 18 30 7 645 202 and 18 30 7 613 670. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$347.99

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation

from

$194.99

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design, cutting and welding is required. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$206.99

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation

from

$1261.99

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452859. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun” Body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun” Body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2006 Mini Cooper and interchanges with OE parts 18 40 7 533 402 and 18 40 7 539 134, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

Upgrade your 2014 Mini Cooper with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2014 Mini Cooper, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mini or enhancing its overall performance, Exhaust Parts are key to keeping your Cooper functioning at its best. At Advance Auto Parts, we offer a wide selection of 18 Exhaust Parts for the 2014 Mini Cooper, designed to meet your needs without breaking the bank. From Exhaust Gasket replacements to Exhaust Manifold and Headers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2014 Mini Cooper at great prices. Our Exhaust Parts inventory for this model ranges from just $7.29 to $1,372.99, with an average price of $442.38. Our 18 Exhaust Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2014 Mini Cooper without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2014 Mini Cooper, we stock popular OEM and aftermarket Exhaust Parts from top names like Walker, and more. Walker Exhaust Parts start at just $197.99 and boast an impressive 4.2 stars average rating from customers. With 96 customer reviews and counting, our 2014 Mini Cooper Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2014 Mini Cooper is always ready to roll. We’re committed to providing you with everything you need to keep your Cooper in top shape, all in one place. Start shopping confidently below for your 2014 Mini Cooper!

Best-Selling Exhaust Gaskets for 2014 Mini Coopers

Enhance the driving experience in your Mini with 2 quality Exhaust Gasket components, starting at $7.29.

show more show less

from

$37.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function
Contains all gaskets and seals to remove and replace exhaust manifold

from

$7.29

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

Top Picks for 2014 Mini Cooper Catalytic Converters

Upgrade Mini Coopers with top-quality Catalytic Converters parts, including 10 OEM and aftermarket selections for your 2014 model.

show more show less

from

$197.99

Product Features:

EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

from

$1372.99

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$194.99

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$1250.99

Torca AccuSeal® Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$959.99

Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
Simplifies installation with essential gaskets and hardware being included in the box
Durable 308 stainless steel MIG welds

from

$862.99

Product Features:

EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

from

$580.99

Stainless Steel Construction
Laser Cut Flanges
100% MIG-Welded
Direct Bolt On

from

$281.99

Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
Compact, lightweight construction enables installation in confined areas, welding is required
Durable 308 stainless steel MIG welds

from

$206.99

CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation

from

$36.99

Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:

Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.

In-Demand Exhaust System Kits for 2014 Mini Coopers

Select from 4 premium Exhaust System Kits parts for your 2014 Mini Cooper, with prices ranging from $437.00 to $857.99.

show more show less

from

$857.99

The S-Type optimized combination of packing filament, straight-through core dimensions, perforation pattern and cylindrical shape delivers the intoxicating BORLA(R)Sound of Power with every squeeze of the throttle.

Product Features:

Slim, Equidistant Space Between Wide Diameter Core And Muffler Wall Provides An Aggressive And Throaty High-Performance Sound
Exhaust Gas Velocity Maintained Throughout Temperature Range
Sound Waves – Decibel Level Range
No Reflective Baffles (Or Chambers), Just A Highly-Evolved Straight-Through Design Proven To Out-Flow An Empty, Straight Pipe
Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

from

$765.99

2.5 in. Dia. 409 Stainless Steel
100% Hand TIG Welded
Factory Hanger Locations
50 State Legal

from

$515.99

Complete mandrel-bent replacement of all parts from behind or near the last catalytic converter, offering long-lasting, high corrosion resistance and durability
Bolt-on, multi-piece design for smooth and easy DIY installation around obstructions, ensuring quality fitment and function without requiring fabrication
All components, gaskets, clamps, and hardware required, along with installation instructions, are packaged together in a single protective box
Leaves all emissions equipment intact, maintaining emissions compliance

from

$437.00

Direct-Fit Exhaust System Replacement Kit

Top-Rated Exhaust Parts Brands For Your 2014 Mini Cooper

Shop for the best-rated brands offering Exhaust Parts and other products for your 2014 Mini Coopers. Below you’ll find some of our best rated Exhaust Parts from Walker, and more. Exhaust Parts from these brands that fit a 2014 Cooper start at just $197.99 and are rated as high as 4.2 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Walker 2014 Mini Cooper Exhaust Parts

When it comes to maintaining or upgrading your 2014 Mini Cooper, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 2014 Mini Cooper. With over 1 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $197.99. Plus, with over 12 customer reviews and an average rating of 4.2 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $197.99

(12)

Ultra EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID)

“Good product but very little room for error when cutting off old catalytic converter and matching up to new.”

FAQs for 2014 Mini Cooper Exhaust Parts

Which Exhaust Parts are best-sellers for 2014 Mini Coopers?

Out of 18 Exhaust Parts that fit 2014 Mini Coopers, the following parts are the top sellers:

Exhaust Manifold Gasket Set (10717131) – $37.99
Direct-Fit OEM Grade Catalytic Converter with Integrated Exhaust Manifold (10606126) – $1,372.99
OEM Grade Universal Catalytic Converter – 2.25" (10605383) – $194.99

What’s the price range for 2014 Mini Cooper Exhaust Parts?

Exhaust Part prices for the 2014 Mini Cooper start at $7.29 and go up to $1,372.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2014 Mini Cooper?

The average price for Exhaust Parts for the 2014 Mini Cooper is $442.38. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Mini Cooper model years?

Yes, we currently carry Exhaust Parts for 21 model years of Mini Coopers between 2002 and 2024. Exhaust Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Exhaust Parts for my 2014 Mini Cooper?

The cheapest 2014 Mini Cooper Exhaust Parts we carry in stock are:

Exhaust Manifold Gasket Set (12548016) – $7.29
Exhaust Studs (50221572) – $7.99
Exhaust Clamp (50047542) – $36.99
Exhaust Manifold Gasket Set (10717131) – $37.99
OEM Grade Universal Catalytic Converter – 2.25" (10605383) – $194.99

What are the top-rated Exhaust Parts that fit the 2014 Mini Cooper?

Out of 96 reviews by customers, our 2014 Mini Cooper Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2014 Mini Cooper and their top-rated products:

Catalytic Converters
- Ultra EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (20200240) – $197.99

What types of Exhaust Parts do you sell for my 2014 Mini Cooper?

As of 11/2/25, these are some of the most in-demand types of Exhaust Parts for a 2014 Mini Cooper:

Can I get help with 2014 Mini Cooper Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mini Exhaust Parts and more.

What is your return policy for Mini Cooper Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Mini Cooper Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2014 Mini Cooper Exhaust Parts

BRExhaust – Direct-Fit Exhaust System Replacement Kit (Part No.106-0905)

BRExhaust – Direct-Fit Exhaust System Kit (Part No.106-0831)

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-36318)

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-36331-P)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97189)

Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-42466-00)

Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-34782-00)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97003)

Rein – Exhaust Clamp (Part No.EXC0034)

Rein – Exhaust Studs (Part No.HWB0091)

Walker – Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.14716)

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-862)

MagnaFlow – Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.5531028)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.52472)

Walker – Ultra EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93253)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.49351)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.49028)

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.00" (Part No.51654)

Walker – CalCat CARB Universal Catalytic Converter – 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.83205)

MagnaFlow – Direct-Fit California Grade Catalytic Converter (Part No.5461350)

aFe POWER – Catalytic Converter (Part No.47-46302)

Walker – Ultra EPA Direct-Fit Catalytic Converter – 3" Outlet (ID) (Part No.16687)

MagnaFlow – Direct-Fit California Grade Catalytic Converter (Part No.5571029)

MagnaFlow – CALIFORNIA (Part No.5571472)

Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84406)

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.25" (Part No.51205)

Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84205)

MagnaFlow – Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.452859)

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97189)

Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-34782-00)

MagnaFlow – Direct-Fit California Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.5531028)

Rein – Exhaust Studs (Part No.HWB0091)

Walker – Ultra EPA Universal Catalytic Converter – 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.93253)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter with Integrated Exhaust Manifold (Part No.49028)

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.25" (Part No.51205)

MagnaFlow – CALIFORNIA (Part No.5571472)

MagnaFlow – Direct-Fit OEM Grade Catalytic Converter (Part No.52472)

Walker – Ultra EPA Direct-Fit Catalytic Converter – 3" Outlet (ID) (Part No.16687)

aFe POWER – Catalytic Converter (Part No.47-46302)

MagnaFlow – OEM Grade Universal Catalytic Converter – 2.00" (Part No.51654)

Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84205)

Rein – Exhaust Clamp (Part No.EXC0034)

Borla Performance Exhaust – T-304 Ss, 2.5"Pipe Dia, Single Exhaust With Dual Exit, Dual 4" Duals (Part No.11915)

aFe POWER – MACH Force-Xp Cat Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Avail. HP (Part No.49-36318)

BRExhaust – Direct-Fit Exhaust System Kit (Part No.106-0831)

BRExhaust – Direct-Fit Exhaust System Replacement Kit (Part No.106-0905)